Shape Factor Dependent on Unit Weight Calculator

✖The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.ⓘ Ultimate Bearing Capacity [q_f]			+10% -10%
✖Shape Factor dependent on Cohesion is defined as ratio of the limit unit base resistance of a footing of any shape bearing on the soil surface to that of a strip footing on the soil surface.ⓘ Shape Factor dependent on Cohesion [s_c]			+10% -10%
✖Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.ⓘ Cohesion [C]			+10% -10%
✖Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.ⓘ Bearing Capacity Factor dependent on Cohesion [N_c]			+10% -10%
✖Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.ⓘ Effective Surcharge [σ']			+10% -10%
✖Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.ⓘ Bearing Capacity Factor dependent on Surcharge [N_q]			+10% -10%
✖Width of Footing is the shorter dimension of the footing.ⓘ Width of Footing [B]			+10% -10%
✖Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.ⓘ Unit Weight of Soil [γ]			+10% -10%
✖Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.ⓘ Bearing Capacity Factor dependent on Unit Weight [N_γ]			+10% -10%

✖Shape Factor dependent on Unit Weight is the factor in soil mechanics used in calculating bearing capacity.ⓘ Shape Factor Dependent on Unit Weight [s_γ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Bearing Capacity of Soil by Terzaghi's Analysis Formulas PDF PDF Image

Shape Factor Dependent on Unit Weight Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shape Factor Dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight)
s_γ = (q_f-((s_c*C*N_c)+(σ'*N_q)))/(0.5*B*γ*N_γ)
This formula uses 10 Variables

Variables Used

Shape Factor Dependent on Unit Weight - Shape Factor dependent on Unit Weight is the factor in soil mechanics used in calculating bearing capacity.
Ultimate Bearing Capacity - (Measured in Pascal) - The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear.
Shape Factor dependent on Cohesion - Shape Factor dependent on Cohesion is defined as ratio of the limit unit base resistance of a footing of any shape bearing on the soil surface to that of a strip footing on the soil surface.
Cohesion - (Measured in Pascal) - Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil.
Bearing Capacity Factor dependent on Cohesion - Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil.
Effective Surcharge - (Measured in Pascal) - Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure.
Bearing Capacity Factor dependent on Surcharge - Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge.
Width of Footing - (Measured in Meter) - Width of Footing is the shorter dimension of the footing.
Unit Weight of Soil - (Measured in Newton per Cubic Meter) - Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil.
Bearing Capacity Factor dependent on Unit Weight - Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

STEP 1: Convert Input(s) to Base Unit

Ultimate Bearing Capacity: 60 Kilopascal --> 60000 Pascal (Check conversion here)
Shape Factor dependent on Cohesion: 1.7 --> No Conversion Required
Cohesion: 4.23 Kilopascal --> 4230 Pascal (Check conversion here)
Bearing Capacity Factor dependent on Cohesion: 1.93 --> No Conversion Required
Effective Surcharge: 10 Pascal --> 10 Pascal No Conversion Required
Bearing Capacity Factor dependent on Surcharge: 2.01 --> No Conversion Required
Width of Footing: 2 Meter --> 2 Meter No Conversion Required
Unit Weight of Soil: 18 Kilonewton per Cubic Meter --> 18000 Newton per Cubic Meter (Check conversion here)
Bearing Capacity Factor dependent on Unit Weight: 1.6 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s_γ = (q_f-((s_c*C*N_c)+(σ'*N_q)))/(0.5*B*γ*N_γ) --> (60000-((1.7*4230*1.93)+(10*2.01)))/(0.5*2*18000*1.6)

Evaluating ... ...

s_γ = 1.60073854166667

STEP 3: Convert Result to Output's Unit

1.60073854166667 --> No Conversion Required

FINAL ANSWER

1.60073854166667 ≈ 1.600739 <-- Shape Factor Dependent on Unit Weight

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Bearing Capacity of Soil by Terzaghi's Analysis » Specialization of Terzaghi's Equations » Shape Factor Dependent on Unit Weight

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Specialization of Terzaghi's Equations Calculators

Bearing Capacity Factor Dependent on Cohesion

LaTeX Go Bearing Capacity Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Cohesion)

Cohesion of Soil depending on Shape Factors

LaTeX Go Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Shape Factor dependent on Cohesion*Bearing Capacity Factor dependent on Cohesion)

Shape Factor Dependent on Cohesion

LaTeX Go Shape Factor dependent on Cohesion = (Ultimate Bearing Capacity-((Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)))/(Bearing Capacity Factor dependent on Cohesion*Cohesion)

Bearing Capacity depending on Shape Factors

LaTeX Go Bearing Capacity = (Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge (KN/m2)*Bearing Capacity Factor dependent on Surcharge)+(0.5*Unit Weight of Soil*Width of Footing*Bearing Capacity Factor dependent on Unit Weight*Shape Factor Dependent on Unit Weight)

Shape Factor Dependent on Unit Weight Formula

LaTeX Go

What is Shape Factor?

Shape factor refers to a value that is affected by an object's shape but is independent of its dimensions. It may refer to one of number of values in physics, engineering, image analysis, or statistics. In physics: Shape factor, or shaping factor, a performance measure for filters such as band-pass filters.

How to Calculate Shape Factor Dependent on Unit Weight?

Shape Factor Dependent on Unit Weight calculator uses Shape Factor Dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight) to calculate the Shape Factor Dependent on Unit Weight, The Shape Factor Dependent on Unit Weight formula is defined as the value of shape factor when we have prior information of other parameters used. Shape Factor Dependent on Unit Weight is denoted by s_γ symbol.

How to calculate Shape Factor Dependent on Unit Weight using this online calculator? To use this online calculator for Shape Factor Dependent on Unit Weight, enter Ultimate Bearing Capacity (q_f), Shape Factor dependent on Cohesion (s_c), Cohesion (C), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge (σ'), Bearing Capacity Factor dependent on Surcharge (N_q), Width of Footing (B), Unit Weight of Soil (γ) & Bearing Capacity Factor dependent on Unit Weight (N_γ) and hit the calculate button. Here is how the Shape Factor Dependent on Unit Weight calculation can be explained with given input values -> -0.164552 = (60000-((1.7*4230*1.93)+(10*2.01)))/(0.5*2*18000*1.6).

FAQ

What is Shape Factor Dependent on Unit Weight?

The Shape Factor Dependent on Unit Weight formula is defined as the value of shape factor when we have prior information of other parameters used and is represented as s_γ = (q_f-((s_c*C*N_c)+(σ'*N_q)))/(0.5*B*γ*N_γ) or Shape Factor Dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight). The Ultimate Bearing Capacity is defined as the minimum gross pressure intensity at the base of the foundation at which the soil fails in shear, Shape Factor dependent on Cohesion is defined as ratio of the limit unit base resistance of a footing of any shape bearing on the soil surface to that of a strip footing on the soil surface, Cohesion is the ability of like particles within soil to hold onto each other. It is the shear strength or force that binds together like particles in the structure of a soil, Bearing Capacity Factor dependent on Cohesion is a constant whose value depends upon the cohesion of soil, Effective Surcharge also called as surcharge load refers to the vertical pressure or any load that acts over the ground surface additional to basic earth pressure, Bearing Capacity Factor dependent on Surcharge is a constant whose value depends upon surcharge, Width of Footing is the shorter dimension of the footing, Unit Weight of Soil mass is the ratio of the total weight of soil to the total volume of soil & Bearing Capacity Factor dependent on Unit Weight is a constant whose value depends upon unit weight of soil.

How to calculate Shape Factor Dependent on Unit Weight?

The Shape Factor Dependent on Unit Weight formula is defined as the value of shape factor when we have prior information of other parameters used is calculated using Shape Factor Dependent on Unit Weight = (Ultimate Bearing Capacity-((Shape Factor dependent on Cohesion*Cohesion*Bearing Capacity Factor dependent on Cohesion)+(Effective Surcharge*Bearing Capacity Factor dependent on Surcharge)))/(0.5*Width of Footing*Unit Weight of Soil*Bearing Capacity Factor dependent on Unit Weight). To calculate Shape Factor Dependent on Unit Weight, you need Ultimate Bearing Capacity (q_f), Shape Factor dependent on Cohesion (s_c), Cohesion (C), Bearing Capacity Factor dependent on Cohesion (N_c), Effective Surcharge (σ'), Bearing Capacity Factor dependent on Surcharge (N_q), Width of Footing (B), Unit Weight of Soil (γ) & Bearing Capacity Factor dependent on Unit Weight (N_γ). With our tool, you need to enter the respective value for Ultimate Bearing Capacity, Shape Factor dependent on Cohesion, Cohesion, Bearing Capacity Factor dependent on Cohesion, Effective Surcharge, Bearing Capacity Factor dependent on Surcharge, Width of Footing, Unit Weight of Soil & Bearing Capacity Factor dependent on Unit Weight and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search