Sewage Flow given Food to Microorganism Ratio Calculator

✖Food to Microorganism Ratio is actually a measurement of the amount of incoming food divided by the Lbs of Microorganisms in your system.ⓘ Food to Microorganism Ratio [FM]			+10% -10%
✖Volume of Tank is defined as the capacity of flocculation and mixing tank.ⓘ Volume of Tank [V]			+10% -10%
✖MLSS is the concentration of suspended solids in the mixed liquor within an aeration tank during the activated sludge process.ⓘ MLSS [X]			+10% -10%
✖Influent BOD is the total amount of BOD which is present in the incoming sewage.ⓘ Influent BOD [Q_i]			+10% -10%

✖Sewage Flow into the aeration tank is the sewage flow into the aeration tank when we have prior information of other parameters used.ⓘ Sewage Flow given Food to Microorganism Ratio [Q]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Food is to Microorganism Ratio or F is to M Ratio Formulas PDF PDF Image

Sewage Flow given Food to Microorganism Ratio Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sewage Flow = (Food to Microorganism Ratio*Volume of Tank*MLSS)/Influent BOD
Q = (FM*V*X)/Q_i
This formula uses 5 Variables

Variables Used

Sewage Flow - (Measured in Cubic Meter) - Sewage Flow into the aeration tank is the sewage flow into the aeration tank when we have prior information of other parameters used.
Food to Microorganism Ratio - Food to Microorganism Ratio is actually a measurement of the amount of incoming food divided by the Lbs of Microorganisms in your system.
Volume of Tank - (Measured in Cubic Meter) - Volume of Tank is defined as the capacity of flocculation and mixing tank.
MLSS - (Measured in Kilogram per Cubic Meter) - MLSS is the concentration of suspended solids in the mixed liquor within an aeration tank during the activated sludge process.
Influent BOD - (Measured in Kilogram per Cubic Meter) - Influent BOD is the total amount of BOD which is present in the incoming sewage.

STEP 1: Convert Input(s) to Base Unit

Food to Microorganism Ratio: 0.001 --> No Conversion Required
Volume of Tank: 1.5 Cubic Meter --> 1.5 Cubic Meter No Conversion Required
MLSS: 2 Milligram per Liter --> 0.002 Kilogram per Cubic Meter (Check conversion here)
Influent BOD: 0.0009 Milligram per Liter --> 9E-07 Kilogram per Cubic Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Q = (FM*V*X)/Q_i --> (0.001*1.5*0.002)/9E-07

Evaluating ... ...

Q = 3.33333333333333

STEP 3: Convert Result to Output's Unit

3.33333333333333 Cubic Meter --> No Conversion Required

FINAL ANSWER

3.33333333333333 ≈ 3.333333 Cubic Meter <-- Sewage Flow

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Sewage » Food is to Microorganism Ratio or F is to M Ratio » Sewage Flow given Food to Microorganism Ratio

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Food is to Microorganism Ratio or F is to M Ratio Calculators

BOD Load applied to Aeration System

LaTeX Go BOD Load applied to Aeration System = Sewage Flow*Influent BOD

Total Microbial Mass given Food to Microorganism Ratio

LaTeX Go Total Microbial Mass = Daily BOD/Food to Microorganism Ratio

Daily BOD Load given Food to Microorganism Ratio

LaTeX Go Daily BOD = Food to Microorganism Ratio*Total Microbial Mass

Food to Microorganism Ratio

LaTeX Go Food to Microorganism Ratio = Daily BOD/Total Microbial Mass

Sewage Flow given Food to Microorganism Ratio Formula

LaTeX Go

Sewage Flow = (Food to Microorganism Ratio*Volume of Tank*MLSS)/Influent BOD
Q = (FM*V*X)/Q_i

What is Sewage?

Sewage, or domestic/municipal wastewater, is a type of wastewater that is produced by a community of people. ... Sewage usually travels from a building's plumbing either into a sewer, which will carry it elsewhere, or into an onsite sewage facility (of which there are many kinds).

How to Calculate Sewage Flow given Food to Microorganism Ratio?

Sewage Flow given Food to Microorganism Ratio calculator uses Sewage Flow = (Food to Microorganism Ratio*Volume of Tank*MLSS)/Influent BOD to calculate the Sewage Flow, The Sewage Flow given Food to Microorganism Ratio formula is defined as the calculation of the sewage flow when we have prior information of food to microorganism ratio. Sewage Flow is denoted by Q symbol.

How to calculate Sewage Flow given Food to Microorganism Ratio using this online calculator? To use this online calculator for Sewage Flow given Food to Microorganism Ratio, enter Food to Microorganism Ratio (FM), Volume of Tank (V), MLSS (X) & Influent BOD (Q_i) and hit the calculate button. Here is how the Sewage Flow given Food to Microorganism Ratio calculation can be explained with given input values -> 20 = (0.001*1.5*0.002)/9E-07.

FAQ

What is Sewage Flow given Food to Microorganism Ratio?

The Sewage Flow given Food to Microorganism Ratio formula is defined as the calculation of the sewage flow when we have prior information of food to microorganism ratio and is represented as Q = (FM*V*X)/Q_i or Sewage Flow = (Food to Microorganism Ratio*Volume of Tank*MLSS)/Influent BOD. Food to Microorganism Ratio is actually a measurement of the amount of incoming food divided by the Lbs of Microorganisms in your system, Volume of Tank is defined as the capacity of flocculation and mixing tank, MLSS is the concentration of suspended solids in the mixed liquor within an aeration tank during the activated sludge process & Influent BOD is the total amount of BOD which is present in the incoming sewage.

How to calculate Sewage Flow given Food to Microorganism Ratio?

The Sewage Flow given Food to Microorganism Ratio formula is defined as the calculation of the sewage flow when we have prior information of food to microorganism ratio is calculated using Sewage Flow = (Food to Microorganism Ratio*Volume of Tank*MLSS)/Influent BOD. To calculate Sewage Flow given Food to Microorganism Ratio, you need Food to Microorganism Ratio (FM), Volume of Tank (V), MLSS (X) & Influent BOD (Q_i). With our tool, you need to enter the respective value for Food to Microorganism Ratio, Volume of Tank, MLSS & Influent BOD and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Sewage Flow?

In this formula, Sewage Flow uses Food to Microorganism Ratio, Volume of Tank, MLSS & Influent BOD. We can use 2 other way(s) to calculate the same, which is/are as follows -

Sewage Flow = Daily BOD/Influent BOD
Sewage Flow = (Daily BOD*MLSS*Volume of Tank)/(Total Microbial Mass*Influent BOD)

Home

FREE PDFs

🔍 Search