Settlement of Plate in Load Bearing Test Solution

STEP 0: Pre-Calculation Summary
Formula Used
Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2
ρ1 = Δ*((1+B)/(2*B))^2
This formula uses 3 Variables
Variables Used
Settlement of Plate - (Measured in Meter) - Settlement of plate is the vertical displacement of the plate.
Settlement Foundation - (Measured in Meter) - Settlement Foundation is the process and principles involved in ensuring the stable and predictable settlement of structures built on soil or other earth materials.
Width of Full Size Bearing Plate - (Measured in Meter) - Width of Full Size Bearing Plate is the diameter or width of a large, rigid plate that is placed on the surface of the ground or at a specified depth below the ground surface.
STEP 1: Convert Input(s) to Base Unit
Settlement Foundation: 4.8 Millimeter --> 0.0048 Meter (Check conversion ​here)
Width of Full Size Bearing Plate: 2000 Millimeter --> 2 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ρ1 = Δ*((1+B)/(2*B))^2 --> 0.0048*((1+2)/(2*2))^2
Evaluating ... ...
ρ1 = 0.0027
STEP 3: Convert Result to Output's Unit
0.0027 Meter --> No Conversion Required
FINAL ANSWER
0.0027 Meter <-- Settlement of Plate
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2100+ more calculators!
Verifier Image
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

Soil Compaction Test Calculators

Percent Moisture in Sand Cone Method
​ LaTeX ​ Go Percent Moisture from Sand Cone Test = (100*(Weight of Moist Soil-Weight of Dry Soil))/Weight of Dry Soil
Density of Sand given Volume of Soil for Sand Filling in Sand Cone Method
​ LaTeX ​ Go Density of Sand = (Weight of Total Soil/Volume of Soil)
Volume of Soil for Sand Filling in Sand Cone Method
​ LaTeX ​ Go Volume of Soil = (Weight of Total Soil/Density of Sand)
Weight of Sand Filling Hole in Sand Cone Method
​ LaTeX ​ Go Weight of Total Soil = (Volume of Soil*Density of Sand)

Settlement of Plate in Load Bearing Test Formula

​LaTeX ​Go
Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2
ρ1 = Δ*((1+B)/(2*B))^2

What is Settlement in Foundation?

Inevitably, soils deform under the load of foundation structures. The total vertical displacement that occur at foundation level is termed as settlement. The cause of foundation settlement is the reduction of volume air void ratio in the soil.

How to Calculate Settlement of Plate in Load Bearing Test?

Settlement of Plate in Load Bearing Test calculator uses Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2 to calculate the Settlement of Plate, The Settlement of Plate in Load Bearing Test formula is defined as the vertical displacement of the plate due to applied load. Settlement of Plate is denoted by ρ1 symbol.

How to calculate Settlement of Plate in Load Bearing Test using this online calculator? To use this online calculator for Settlement of Plate in Load Bearing Test, enter Settlement Foundation (Δ) & Width of Full Size Bearing Plate (B) and hit the calculate button. Here is how the Settlement of Plate in Load Bearing Test calculation can be explained with given input values -> 0.0027 = 0.0048*((1+2)/(2*2))^2.

FAQ

What is Settlement of Plate in Load Bearing Test?
The Settlement of Plate in Load Bearing Test formula is defined as the vertical displacement of the plate due to applied load and is represented as ρ1 = Δ*((1+B)/(2*B))^2 or Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2. Settlement Foundation is the process and principles involved in ensuring the stable and predictable settlement of structures built on soil or other earth materials & Width of Full Size Bearing Plate is the diameter or width of a large, rigid plate that is placed on the surface of the ground or at a specified depth below the ground surface.
How to calculate Settlement of Plate in Load Bearing Test?
The Settlement of Plate in Load Bearing Test formula is defined as the vertical displacement of the plate due to applied load is calculated using Settlement of Plate = Settlement Foundation*((1+Width of Full Size Bearing Plate)/(2*Width of Full Size Bearing Plate))^2. To calculate Settlement of Plate in Load Bearing Test, you need Settlement Foundation (Δ) & Width of Full Size Bearing Plate (B). With our tool, you need to enter the respective value for Settlement Foundation & Width of Full Size Bearing Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!