Set Back Distance by Approx Method (L is greater than S) Calculator

✖Stopping Sight Distance is defined as distance provided on the road before a sharp turn.ⓘ Stopping Sight Distance [SSD]			+10% -10%
✖The Radius of Curve is defined as the horizontal curve with a specific radius which quantifies smoothness and ease of vehicle movement through a curve.ⓘ Radius of Curve [R_t]			+10% -10%

✖Set back distance is the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve.ⓘ Set Back Distance by Approx Method (L is greater than S) [m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Highway Geometric Design Formulas PDF PDF Image

Set Back Distance by Approx Method (L is greater than S) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve)
m = SSD^2/(8*R_t)
This formula uses 3 Variables

Variables Used

Set Back Distance - (Measured in Meter) - Set back distance is the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve.
Stopping Sight Distance - (Measured in Meter) - Stopping Sight Distance is defined as distance provided on the road before a sharp turn.
Radius of Curve - (Measured in Meter) - The Radius of Curve is defined as the horizontal curve with a specific radius which quantifies smoothness and ease of vehicle movement through a curve.

STEP 1: Convert Input(s) to Base Unit

Stopping Sight Distance: 160 Meter --> 160 Meter No Conversion Required
Radius of Curve: 300 Meter --> 300 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m = SSD^2/(8*R_t) --> 160^2/(8*300)

Evaluating ... ...

m = 10.6666666666667

STEP 3: Convert Result to Output's Unit

10.6666666666667 Meter --> No Conversion Required

FINAL ANSWER

10.6666666666667 ≈ 10.66667 Meter <-- Set Back Distance

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Transportation Engineering » Highway Engineering » Highway Geometric Design » Set Back Distance and curve Resistance » Set Back Distance by Approx Method (L is greater than S)

Credits

Created by swaroop

RV COLLEGE OF ENGINEERING (RVCE), BANGALORE

swaroop has created this Calculator and 5 more calculators!

Verified by Rachana B V

The National Institute of Engineering (NIE), Mysuru

Rachana B V has verified this Calculator and 50+ more calculators!

< Set Back Distance and curve Resistance Calculators

Set Back Distance by Rational Method (L is greater than S) Single Lane

LaTeX Go Set Back Distance = Radius of Curve-Radius of Curve*cos((Stopping Sight Distance)/(2*Radius of Curve))

Set Back Distance by Approx Method (L is less than S)

LaTeX Go Set Back Distance = (Length of Curve*(2*Stopping Sight Distance-Length of Curve))/(8*Radius of Curve)

Set Back Distance by Approx Method (L is greater than S)

LaTeX Go Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve)

Set Back Distance by Approx Method (L is greater than S) Formula

LaTeX Go

Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve)
m = SSD^2/(8*R_t)

What is the setback distance?

The setback distance is the distance required from the center line of horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve.

What are the factors affecting setback distance?

Factors affecting setback distance are as follows
1. Sight distance desired
2. Length of Curve
3. Radius of horizontal curve

How to Calculate Set Back Distance by Approx Method (L is greater than S)?

Set Back Distance by Approx Method (L is greater than S) calculator uses Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve) to calculate the Set Back Distance, Set Back Distance by Approx Method (L is greater than S) is defined as the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve when length of the curve is more than sight distance. Set Back Distance is denoted by m symbol.

How to calculate Set Back Distance by Approx Method (L is greater than S) using this online calculator? To use this online calculator for Set Back Distance by Approx Method (L is greater than S), enter Stopping Sight Distance (SSD) & Radius of Curve (R_t) and hit the calculate button. Here is how the Set Back Distance by Approx Method (L is greater than S) calculation can be explained with given input values -> 10.66667 = 160^2/(8*300).

FAQ

What is Set Back Distance by Approx Method (L is greater than S)?

Set Back Distance by Approx Method (L is greater than S) is defined as the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve when length of the curve is more than sight distance and is represented as m = SSD^2/(8*R_t) or Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve). Stopping Sight Distance is defined as distance provided on the road before a sharp turn & The Radius of Curve is defined as the horizontal curve with a specific radius which quantifies smoothness and ease of vehicle movement through a curve.

How to calculate Set Back Distance by Approx Method (L is greater than S)?

Set Back Distance by Approx Method (L is greater than S) is defined as the distance required from the centerline of a horizontal curve to an obstruction on the inner side of the curve to provide adequate sight distance at a horizontal curve when length of the curve is more than sight distance is calculated using Set Back Distance = Stopping Sight Distance^2/(8*Radius of Curve). To calculate Set Back Distance by Approx Method (L is greater than S), you need Stopping Sight Distance (SSD) & Radius of Curve (R_t). With our tool, you need to enter the respective value for Stopping Sight Distance & Radius of Curve and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Set Back Distance?

In this formula, Set Back Distance uses Stopping Sight Distance & Radius of Curve. We can use 2 other way(s) to calculate the same, which is/are as follows -

Set Back Distance = (Length of Curve*(2*Stopping Sight Distance-Length of Curve))/(8*Radius of Curve)
Set Back Distance = Radius of Curve-Radius of Curve*cos((Stopping Sight Distance)/(2*Radius of Curve))

Home

FREE PDFs

🔍 Search