Sensitivity of Inclined Manometer Calculator

✖The Angle between Manometer and Surface is the angle formed between the manometer tube and the horizontal surface, affecting fluid pressure readings and measurements.ⓘ Angle between Manometer and Surface [Θ]

+10%

-10%

✖The Manometer Sensitivity is the ability of a manometer to detect small changes in pressure, providing accurate measurements in fluid mechanics applications.ⓘ Sensitivity of Inclined Manometer [S]

⎘ Copy

👎

Formula

Reset

👍

Download Fluid Mechanics Formula PDF PDF Image

Sensitivity of Inclined Manometer Solution

STEP 0: Pre-Calculation Summary

Formula Used

Manometer Sensitivity = 1/sin(Angle between Manometer and Surface)
S = 1/sin(Θ)
This formula uses 1 Functions, 2 Variables

Functions Used

sin - Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse., sin(Angle)

Variables Used

Manometer Sensitivity - (Measured in Watt) - The Manometer Sensitivity is the ability of a manometer to detect small changes in pressure, providing accurate measurements in fluid mechanics applications.
Angle between Manometer and Surface - (Measured in Radian) - The Angle between Manometer and Surface is the angle formed between the manometer tube and the horizontal surface, affecting fluid pressure readings and measurements.

STEP 1: Convert Input(s) to Base Unit

Angle between Manometer and Surface: 35 Degree --> 0.610865238197901 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S = 1/sin(Θ) --> 1/sin(0.610865238197901)

Evaluating ... ...

S = 1.74344679562138

STEP 3: Convert Result to Output's Unit

1.74344679562138 Watt -->1.74344679562138 Volt Ampere (Check conversion here)

FINAL ANSWER

1.74344679562138 ≈ 1.743447 Volt Ampere <-- Manometer Sensitivity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Mechanical » Fluid Mechanics » Introduction to Fluid Mechanics Basics » Fluid Mechanics Basics » Sensitivity of Inclined Manometer

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Fluid Mechanics Basics Calculators

Equation of Continuity for Compressible Fluids

Go Velocity of the fluid at 1 = (Cross-Sectional Area at Point 2*Velocity of the fluid at 2*Density at Point 2)/(Cross-Sectional Area at Point 1*Density at Point 1)

Equation of Continuity for Incompressible Fluids

Go Velocity of the fluid at 1 = (Cross-Sectional Area at Point 2*Velocity of the fluid at 2)/Cross-Sectional Area at Point 1

Cavitation Number

Go Cavitation Number = (Pressure-Vapour Pressure)/(Mass Density*(Fluid Velocity^2)/2)

Bulk Modulus given Volume Stress and Strain

LaTeX Go Bulk Modulus given Volume Stress and Strain = Volume Stress/Volumetric Strain

Sensitivity of Inclined Manometer Formula

Manometer Sensitivity = 1/sin(Angle between Manometer and Surface)
S = 1/sin(Θ)

What is sensitivity of a manometer?

The extent of reading in the output limb of a manometer for a given pressure difference in input limb is known as ‘Sensitivity of Manometer’.

How to Calculate Sensitivity of Inclined Manometer?

Sensitivity of Inclined Manometer calculator uses Manometer Sensitivity = 1/sin(Angle between Manometer and Surface) to calculate the Manometer Sensitivity, Sensitivity of Inclined Manometer formula is defined as a measure of the responsiveness of the manometer to changes in pressure. It indicates how effectively the device can detect variations in fluid levels based on the angle of inclination, enhancing its accuracy in fluid measurement applications. Manometer Sensitivity is denoted by S symbol.

How to calculate Sensitivity of Inclined Manometer using this online calculator? To use this online calculator for Sensitivity of Inclined Manometer, enter Angle between Manometer and Surface (Θ) and hit the calculate button. Here is how the Sensitivity of Inclined Manometer calculation can be explained with given input values -> 1.743447 = 1/sin(0.610865238197901).

FAQ

What is Sensitivity of Inclined Manometer?

Sensitivity of Inclined Manometer formula is defined as a measure of the responsiveness of the manometer to changes in pressure. It indicates how effectively the device can detect variations in fluid levels based on the angle of inclination, enhancing its accuracy in fluid measurement applications and is represented as S = 1/sin(Θ) or Manometer Sensitivity = 1/sin(Angle between Manometer and Surface). The Angle between Manometer and Surface is the angle formed between the manometer tube and the horizontal surface, affecting fluid pressure readings and measurements.

How to calculate Sensitivity of Inclined Manometer?

Sensitivity of Inclined Manometer formula is defined as a measure of the responsiveness of the manometer to changes in pressure. It indicates how effectively the device can detect variations in fluid levels based on the angle of inclination, enhancing its accuracy in fluid measurement applications is calculated using Manometer Sensitivity = 1/sin(Angle between Manometer and Surface). To calculate Sensitivity of Inclined Manometer, you need Angle between Manometer and Surface (Θ). With our tool, you need to enter the respective value for Angle between Manometer and Surface and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search