Sending End Voltage using Capacitive Voltage in Nominal T Method Calculator

✖Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.ⓘ Capacitive Voltage in T [V_c(t)]			+10% -10%
✖Sending End Current in T is defined as the amount of current injected into a medium transmission line from the source or injectors.ⓘ Sending End Current in T [I_s(t)]			+10% -10%
✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in T [Z_t]			+10% -10%

✖Sending End Voltage in T is the voltage at the sending end of a transmission line.ⓘ Sending End Voltage using Capacitive Voltage in Nominal T Method [V_s(t)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

Sending End Voltage using Capacitive Voltage in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sending End Voltage in T = Capacitive Voltage in T+((Sending End Current in T*Impedance in T)/2)
V_s(t) = V_c(t)+((I_s(t)*Z_t)/2)
This formula uses 4 Variables

Variables Used

Sending End Voltage in T - (Measured in Volt) - Sending End Voltage in T is the voltage at the sending end of a transmission line.
Capacitive Voltage in T - (Measured in Volt) - Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.
Sending End Current in T - (Measured in Ampere) - Sending End Current in T is defined as the amount of current injected into a medium transmission line from the source or injectors.
Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

Capacitive Voltage in T: 387 Volt --> 387 Volt No Conversion Required
Sending End Current in T: 16.2 Ampere --> 16.2 Ampere No Conversion Required
Impedance in T: 9.07 Ohm --> 9.07 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_s(t) = V_c(t)+((I_s(t)*Z_t)/2) --> 387+((16.2*9.07)/2)

Evaluating ... ...

V_s(t) = 460.467

STEP 3: Convert Result to Output's Unit

460.467 Volt --> No Conversion Required

FINAL ANSWER

460.467 Volt <-- Sending End Voltage in T

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » Sending End Voltage using Capacitive Voltage in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

Sending End Voltage using Capacitive Voltage in Nominal T Method Formula

LaTeX Go

Sending End Voltage in T = Capacitive Voltage in T+((Sending End Current in T*Impedance in T)/2)
V_s(t) = V_c(t)+((I_s(t)*Z_t)/2)

What is the difference between Nominal T Method and Nominal π Method?

In the Nominal T model of the Transmission line, the whole shunt capacitance of the line is assumed to be lumped at the middle of the line. In the Nominal π Method, the shunt capacitance of each line i.e. phase to neutral is divided into two equal parts.

How to Calculate Sending End Voltage using Capacitive Voltage in Nominal T Method?

Sending End Voltage using Capacitive Voltage in Nominal T Method calculator uses Sending End Voltage in T = Capacitive Voltage in T+((Sending End Current in T*Impedance in T)/2) to calculate the Sending End Voltage in T, The Sending End Voltage using Capacitive Voltage in Nominal T method formula is defined as the voltage at the sending end of the medium transmission lines. Sending End Voltage in T is denoted by V_s(t) symbol.

How to calculate Sending End Voltage using Capacitive Voltage in Nominal T Method using this online calculator? To use this online calculator for Sending End Voltage using Capacitive Voltage in Nominal T Method, enter Capacitive Voltage in T (V_c(t)), Sending End Current in T (I_s(t)) & Impedance in T (Z_t) and hit the calculate button. Here is how the Sending End Voltage using Capacitive Voltage in Nominal T Method calculation can be explained with given input values -> 461.52 = 387+((16.2*9.07)/2).

FAQ

What is Sending End Voltage using Capacitive Voltage in Nominal T Method?

The Sending End Voltage using Capacitive Voltage in Nominal T method formula is defined as the voltage at the sending end of the medium transmission lines and is represented as V_s(t) = V_c(t)+((I_s(t)*Z_t)/2) or Sending End Voltage in T = Capacitive Voltage in T+((Sending End Current in T*Impedance in T)/2). Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line, Sending End Current in T is defined as the amount of current injected into a medium transmission line from the source or injectors & Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate Sending End Voltage using Capacitive Voltage in Nominal T Method?

The Sending End Voltage using Capacitive Voltage in Nominal T method formula is defined as the voltage at the sending end of the medium transmission lines is calculated using Sending End Voltage in T = Capacitive Voltage in T+((Sending End Current in T*Impedance in T)/2). To calculate Sending End Voltage using Capacitive Voltage in Nominal T Method, you need Capacitive Voltage in T (V_c(t)), Sending End Current in T (I_s(t)) & Impedance in T (Z_t). With our tool, you need to enter the respective value for Capacitive Voltage in T, Sending End Current in T & Impedance in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Sending End Voltage in T?

In this formula, Sending End Voltage in T uses Capacitive Voltage in T, Sending End Current in T & Impedance in T. We can use 1 other way(s) to calculate the same, which is/are as follows -

Sending End Voltage in T = Receiving End Voltage in T*(Voltage Regulation in T+1)

Home

FREE PDFs

🔍 Search