Sending End Current using Losses in End Condenser Method Solution

STEP 0: Pre-Calculation Summary
Formula Used
Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM))
Is(ecm) = sqrt(Ploss(ecm)/(3*Recm))
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Sending End Current in ECM - (Measured in Ampere) - Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.
Power Loss in ECM - (Measured in Watt) - Power Loss in ECM is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line.
Resistance in ECM - (Measured in Ohm) - Resistance in ECM is a measure of the opposition to current flow in a medium length transmission line.
STEP 1: Convert Input(s) to Base Unit
Power Loss in ECM: 85 Watt --> 85 Watt No Conversion Required
Resistance in ECM: 0.11 Ohm --> 0.11 Ohm No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Is(ecm) = sqrt(Ploss(ecm)/(3*Recm)) --> sqrt(85/(3*0.11))
Evaluating ... ...
Is(ecm) = 16.0491668810489
STEP 3: Convert Result to Output's Unit
16.0491668810489 Ampere --> No Conversion Required
FINAL ANSWER
16.0491668810489 16.04917 Ampere <-- Sending End Current in ECM
(Calculation completed in 00.020 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

End Condenser Method in Medium Line Calculators

Sending End Voltage in End Condenser Method
​ LaTeX ​ Go Sending End Voltage in ECM = Receiving End Voltage in ECM+(Sending End Current in ECM*Impedance in ECM)
Receiving End Current in End Condenser Method
​ LaTeX ​ Go Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM
Sending End Current in End Condenser Method
​ LaTeX ​ Go Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM
Capacitive Current in End Condenser Method
​ LaTeX ​ Go Capacitive Current in ECM = Sending End Current in ECM-Receiving End Current in ECM

Sending End Current using Losses in End Condenser Method Formula

​LaTeX ​Go
Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM))
Is(ecm) = sqrt(Ploss(ecm)/(3*Recm))

What are the disadvantages of condenser end?

Although the end condenser method for the solution of medium lines is simple to work out calculations, yet it has the following drawbacks. There is a considerable error (about 10%) in calculations because the distributed capacitance has been assumed to be lumped or concentrated.

What is end condenser method?

In this method, the capacitance of the line is lumped or concentrated at the receiving or load end. This method of localizing the line capacitance at the load end overestimates the effects of capacitance.

How to Calculate Sending End Current using Losses in End Condenser Method?

Sending End Current using Losses in End Condenser Method calculator uses Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM)) to calculate the Sending End Current in ECM, The Sending End Current using Losses in End Condenser Method formula is defined as the current at the sending end of the medium transmission lines. Sending End Current in ECM is denoted by Is(ecm) symbol.

How to calculate Sending End Current using Losses in End Condenser Method using this online calculator? To use this online calculator for Sending End Current using Losses in End Condenser Method, enter Power Loss in ECM (Ploss(ecm)) & Resistance in ECM (Recm) and hit the calculate button. Here is how the Sending End Current using Losses in End Condenser Method calculation can be explained with given input values -> 1.943651 = sqrt(85/(3*0.11)).

FAQ

What is Sending End Current using Losses in End Condenser Method?
The Sending End Current using Losses in End Condenser Method formula is defined as the current at the sending end of the medium transmission lines and is represented as Is(ecm) = sqrt(Ploss(ecm)/(3*Recm)) or Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM)). Power Loss in ECM is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line & Resistance in ECM is a measure of the opposition to current flow in a medium length transmission line.
How to calculate Sending End Current using Losses in End Condenser Method?
The Sending End Current using Losses in End Condenser Method formula is defined as the current at the sending end of the medium transmission lines is calculated using Sending End Current in ECM = sqrt(Power Loss in ECM/(3*Resistance in ECM)). To calculate Sending End Current using Losses in End Condenser Method, you need Power Loss in ECM (Ploss(ecm)) & Resistance in ECM (Recm). With our tool, you need to enter the respective value for Power Loss in ECM & Resistance in ECM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Sending End Current in ECM?
In this formula, Sending End Current in ECM uses Power Loss in ECM & Resistance in ECM. We can use 2 other way(s) to calculate the same, which is/are as follows -
  • Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM
  • Sending End Current in ECM = (Sending End Voltage in ECM-Receiving End Voltage in ECM)/Impedance in ECM
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!