LCM calculator

Sedimentation Coefficient given Dynamic Viscosity Calculator

Chemistry Engineering Financial Health More >>

↳

Polymer Chemistry Analytical chemistry Atmospheric Chemistry Atomic structure More >>

⤿

Polymers Crystallinity in Polymers Important Formulas of Polymers Spectrometric Characterization of Polymers More >>

✖Mass of Particle is the quantity of matter in a particle regardless of its volume or of any forces acting on it.ⓘ Mass of Particle [m]			+10% -10%
✖Dynamic Viscosity is the resistance to movement of one layer of a fluid over another.ⓘ Dynamic Viscosity [η]			+10% -10%
✖Radius of Spherical Particle is half of the diameter of that particle.ⓘ Radius of Spherical Particle [r₀]			+10% -10%

✖Sedimentation Coefficient is defined as the ratio of a particle's sedimentation velocity to the applied acceleration causing the sedimentation.ⓘ Sedimentation Coefficient given Dynamic Viscosity [s]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Polymer Chemistry Formula PDF PDF Image

Sedimentation Coefficient given Dynamic Viscosity Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sedimentation Coefficient = Mass of Particle/(6*pi*Dynamic Viscosity*Radius of Spherical Particle)
s = m/(6*pi*η*r₀)
This formula uses 1 Constants, 4 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Sedimentation Coefficient - (Measured in Second) - Sedimentation Coefficient is defined as the ratio of a particle's sedimentation velocity to the applied acceleration causing the sedimentation.
Mass of Particle - (Measured in Kilogram) - Mass of Particle is the quantity of matter in a particle regardless of its volume or of any forces acting on it.
Dynamic Viscosity - (Measured in Pascal Second) - Dynamic Viscosity is the resistance to movement of one layer of a fluid over another.
Radius of Spherical Particle - (Measured in Meter) - Radius of Spherical Particle is half of the diameter of that particle.

STEP 1: Convert Input(s) to Base Unit

Mass of Particle: 1.1 Kilogram --> 1.1 Kilogram No Conversion Required
Dynamic Viscosity: 0.06 Newton Second per Square Meter --> 0.06 Pascal Second (Check conversion here)
Radius of Spherical Particle: 0.04 Angstrom --> 4E-12 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

s = m/(6*pi*η*r₀) --> 1.1/(6*pi*0.06*4E-12)

Evaluating ... ...

s = 243153385279.285

STEP 3: Convert Result to Output's Unit

243153385279.285 Second -->0.0243153385279285 Svedberg (Check conversion here)

FINAL ANSWER

0.0243153385279285 ≈ 0.024315 Svedberg <-- Sedimentation Coefficient

(Calculation completed in 00.013 seconds)

You are here -

Home » Chemistry » Polymer Chemistry » Polymers » Sedimentation Coefficient given Dynamic Viscosity

Credits

Created by Pratibha

Amity Institute Of Applied Sciences (AIAS, Amity University), Noida, India

Pratibha has created this Calculator and 100+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Polymers Calculators

Viscosity Number

LaTeX Go Viscosity Number = (Flow Time of Polymer Solution/(Flow Time of Solvent-1))/Polymer Concentration

Compressive Strength of Material

LaTeX Go Compressive Strength of Material = Force Applied on Material/Cross Sectional Area of Polymer

Tensile Strength given Cross-Sectional Area

LaTeX Go Tensile Strength = Force Applied on Material/Cross Sectional Area of Polymer

Deborah Number

LaTeX Go Deborah Number = Time of Relaxation/Observation Time

Sedimentation Coefficient given Dynamic Viscosity Formula

LaTeX Go

Sedimentation Coefficient = Mass of Particle/(6*pi*Dynamic Viscosity*Radius of Spherical Particle)
s = m/(6*pi*η*r₀)

What is Electrophoresis?

Electrophoresis is the motion of dispersed particles relative to a fluid under the influence of a spatially uniform electric field. Electrophoresis of positively charged particles (cations) is sometimes called cataphoresis, while electrophoresis of negatively charged particles (anions) is sometimes called anaphoresis. Electrophoresis is used in laboratories to separate macromolecules based on size. The technique applies a negative charge so proteins move towards a positive charge. Electrophoresis is used extensively in DNA, RNA, and protein analysis.

How to Calculate Sedimentation Coefficient given Dynamic Viscosity?

Sedimentation Coefficient given Dynamic Viscosity calculator uses Sedimentation Coefficient = Mass of Particle/(6*pi*Dynamic Viscosity*Radius of Spherical Particle) to calculate the Sedimentation Coefficient, The Sedimentation Coefficient given Dynamic Viscosity characterizes its sedimentation during centrifugation. It is defined as the ratio of the sedimentation velocity of a particle to the applied acceleration causing the sedimentation. Sedimentation Coefficient is denoted by s symbol.

How to calculate Sedimentation Coefficient given Dynamic Viscosity using this online calculator? To use this online calculator for Sedimentation Coefficient given Dynamic Viscosity, enter Mass of Particle (m), Dynamic Viscosity (η) & Radius of Spherical Particle (r₀) and hit the calculate button. Here is how the Sedimentation Coefficient given Dynamic Viscosity calculation can be explained with given input values -> 2.4E-15 = 1.1/(6*pi*0.06*4E-12).

FAQ

What is Sedimentation Coefficient given Dynamic Viscosity?

The Sedimentation Coefficient given Dynamic Viscosity characterizes its sedimentation during centrifugation. It is defined as the ratio of the sedimentation velocity of a particle to the applied acceleration causing the sedimentation and is represented as s = m/(6*pi*η*r₀) or Sedimentation Coefficient = Mass of Particle/(6*pi*Dynamic Viscosity*Radius of Spherical Particle). Mass of Particle is the quantity of matter in a particle regardless of its volume or of any forces acting on it, Dynamic Viscosity is the resistance to movement of one layer of a fluid over another & Radius of Spherical Particle is half of the diameter of that particle.

How to calculate Sedimentation Coefficient given Dynamic Viscosity?

The Sedimentation Coefficient given Dynamic Viscosity characterizes its sedimentation during centrifugation. It is defined as the ratio of the sedimentation velocity of a particle to the applied acceleration causing the sedimentation is calculated using Sedimentation Coefficient = Mass of Particle/(6*pi*Dynamic Viscosity*Radius of Spherical Particle). To calculate Sedimentation Coefficient given Dynamic Viscosity, you need Mass of Particle (m), Dynamic Viscosity (η) & Radius of Spherical Particle (r₀). With our tool, you need to enter the respective value for Mass of Particle, Dynamic Viscosity & Radius of Spherical Particle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Sedimentation Coefficient?

In this formula, Sedimentation Coefficient uses Mass of Particle, Dynamic Viscosity & Radius of Spherical Particle. We can use 2 other way(s) to calculate the same, which is/are as follows -

Sedimentation Coefficient = Sedimentation Speed/((Radius of Spherical Particle)*(Angular Velocity)^2)
Sedimentation Coefficient = Sedimentation Speed/Applied Acceleration

Home

FREE PDFs

🔍 Search