Sediment Volume to be Distributed in Reservoir Solution

STEP 0: Pre-Calculation Summary
Formula Used
Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment
Vs = Ao*(H-ho)+Vo
This formula uses 5 Variables
Variables Used
Volume of Sediment to be Distributed - (Measured in Cubic Meter) - Volume of Sediment to be Distributed is the volume of sediment in a reservoir and the volume of sediment filling up the conical portion of the reservoir up to the original filling depth.
Area at the New Zero Elevation - (Measured in Square Meter) - Area at the New Zero Elevation refers to a reference coordinate surface used for vertical positions, such as the elevations of Earth-bound features also known as a zero-elevation surface.
Difference in the Elevation (FRL and Original bed) - (Measured in Meter) - Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.
Volume of Sediment - (Measured in Cubic Meter) - Volume of Sediment is the transported volume sediment between old zero and new zero bed level.
STEP 1: Convert Input(s) to Base Unit
Area at the New Zero Elevation: 50 Square Meter --> 50 Square Meter No Conversion Required
Difference in the Elevation (FRL and Original bed): 11 Meter --> 11 Meter No Conversion Required
Height above Bed: 2 Meter --> 2 Meter No Conversion Required
Volume of Sediment: 5 Cubic Meter --> 5 Cubic Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vs = Ao*(H-ho)+Vo --> 50*(11-2)+5
Evaluating ... ...
Vs = 455
STEP 3: Convert Result to Output's Unit
455 Cubic Meter --> No Conversion Required
FINAL ANSWER
455 Cubic Meter <-- Volume of Sediment to be Distributed
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has verified this Calculator and 900+ more calculators!

Area Increment Method Calculators

Sediment Volume between Old Zero and New Zero Bed Level
​ LaTeX ​ Go Volume of Sediment = Volume of Sediment to be Distributed-(Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed))
Depth at which Reservoir is Completely Filled up
​ LaTeX ​ Go Height above Bed = Difference in the Elevation (FRL and Original bed)-((Volume of Sediment to be Distributed-Volume of Sediment)/Area at the New Zero Elevation)
Original Reservoir Area at New Zero Level
​ LaTeX ​ Go Area at the New Zero Elevation = (Volume of Sediment to be Distributed-Volume of Sediment)/(Difference in the Elevation (FRL and Original bed)-Height above Bed)
Sediment Volume to be Distributed in Reservoir
​ LaTeX ​ Go Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment

Sediment Volume to be Distributed in Reservoir Formula

​LaTeX ​Go
Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment
Vs = Ao*(H-ho)+Vo

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Sediment Volume to be Distributed in Reservoir?

Sediment Volume to be Distributed in Reservoir calculator uses Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment to calculate the Volume of Sediment to be Distributed, The Sediment Volume to be Distributed in Reservoir formula is defined as the total quantity of sediment reservoir in the catchment under consideration. Volume of Sediment to be Distributed is denoted by Vs symbol.

How to calculate Sediment Volume to be Distributed in Reservoir using this online calculator? To use this online calculator for Sediment Volume to be Distributed in Reservoir, enter Area at the New Zero Elevation (Ao), Difference in the Elevation (FRL and Original bed) (H), Height above Bed (ho) & Volume of Sediment (Vo) and hit the calculate button. Here is how the Sediment Volume to be Distributed in Reservoir calculation can be explained with given input values -> 455 = 50*(11-2)+5.

FAQ

What is Sediment Volume to be Distributed in Reservoir?
The Sediment Volume to be Distributed in Reservoir formula is defined as the total quantity of sediment reservoir in the catchment under consideration and is represented as Vs = Ao*(H-ho)+Vo or Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment. Area at the New Zero Elevation refers to a reference coordinate surface used for vertical positions, such as the elevations of Earth-bound features also known as a zero-elevation surface, Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL), Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced & Volume of Sediment is the transported volume sediment between old zero and new zero bed level.
How to calculate Sediment Volume to be Distributed in Reservoir?
The Sediment Volume to be Distributed in Reservoir formula is defined as the total quantity of sediment reservoir in the catchment under consideration is calculated using Volume of Sediment to be Distributed = Area at the New Zero Elevation*(Difference in the Elevation (FRL and Original bed)-Height above Bed)+Volume of Sediment. To calculate Sediment Volume to be Distributed in Reservoir, you need Area at the New Zero Elevation (Ao), Difference in the Elevation (FRL and Original bed) (H), Height above Bed (ho) & Volume of Sediment (Vo). With our tool, you need to enter the respective value for Area at the New Zero Elevation, Difference in the Elevation (FRL and Original bed), Height above Bed & Volume of Sediment and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!