Section Modulus of Wind Girder Solution

STEP 0: Pre-Calculation Summary
Formula Used
Section Modulus = 0.059*Diameter of Tank^(2)*Height of Tank
Z = 0.059*DTank^(2)*H
This formula uses 3 Variables
Variables Used
Section Modulus - (Measured in Cubic Meter) - The Section modulus is a geometric property for a given cross-section used in the design of beams or flexural members.
Diameter of Tank - (Measured in Meter) - Diameter of Tank is the distance across the opening at the top of the tank, measured at the widest point.
Height of Tank - (Measured in Meter) - Height of tank is the vertical distance from the floor to the top of the tank. The height of a tank can vary depending on the type, size, and purpose of the tank.
STEP 1: Convert Input(s) to Base Unit
Diameter of Tank: 50 Meter --> 50 Meter No Conversion Required
Height of Tank: 4000 Millimeter --> 4 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Z = 0.059*DTank^(2)*H --> 0.059*50^(2)*4
Evaluating ... ...
Z = 590
STEP 3: Convert Result to Output's Unit
590 Cubic Meter --> No Conversion Required
FINAL ANSWER
590 Cubic Meter <-- Section Modulus
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Heet
Thadomal Shahani Engineering College (Tsec), Mumbai
Heet has created this Calculator and 200+ more calculators!
Verifier Image
Verified by Prerana Bakli
University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA
Prerana Bakli has verified this Calculator and 1600+ more calculators!

Design of Shell Calculators

Minimum Thickness of Shell at Bottom
​ LaTeX ​ Go Minimum Thickness of Shell = ((Hydrostatic Pressure*Nominal Tank Diameter)/(2*Allowable Stress*Joint Efficiency for Shell))+Corrosion Allowance
Circumferential Length of Plate
​ LaTeX ​ Go Circumferential Length of the Plate = (pi*Nominal Tank Diameter)-(Weld Allowance*Number of Plates)
Pressure at Bottom of Tank
​ LaTeX ​ Go Hydrostatic Pressure = 10*Density of Liquid Stored*(Height of Tank-0.3)
Number of Layers
​ LaTeX ​ Go Number of Layers = Height of Tank/Width of Plate

Section Modulus of Wind Girder Formula

​LaTeX ​Go
Section Modulus = 0.059*Diameter of Tank^(2)*Height of Tank
Z = 0.059*DTank^(2)*H

What is Open Top Tanks?

An open top tank is a type of storage tank that has an open top or a removable lid or cover. It is used to store liquids or other materials and is typically cylindrical in shape. Open top tanks are often used in industrial, agricultural, and other settings where it is necessary to store large quantities of liquid or other materials. They may be made of metal, plastic, or other materials, and can be used for storing a wide variety of substances, including water, chemicals, fuels, and more. Open top tanks are useful because they allow easy access to the contents of the tank and allow for the addition or removal of materials as needed.

How to Calculate Section Modulus of Wind Girder?

Section Modulus of Wind Girder calculator uses Section Modulus = 0.059*Diameter of Tank^(2)*Height of Tank to calculate the Section Modulus, Section Modulus of Wind Girder is a measure of the strength and stiffness of the girder in relation to bending under wind loads. Section Modulus is denoted by Z symbol.

How to calculate Section Modulus of Wind Girder using this online calculator? To use this online calculator for Section Modulus of Wind Girder, enter Diameter of Tank (DTank) & Height of Tank (H) and hit the calculate button. Here is how the Section Modulus of Wind Girder calculation can be explained with given input values -> 590 = 0.059*50^(2)*4.

FAQ

What is Section Modulus of Wind Girder?
Section Modulus of Wind Girder is a measure of the strength and stiffness of the girder in relation to bending under wind loads and is represented as Z = 0.059*DTank^(2)*H or Section Modulus = 0.059*Diameter of Tank^(2)*Height of Tank. Diameter of Tank is the distance across the opening at the top of the tank, measured at the widest point & Height of tank is the vertical distance from the floor to the top of the tank. The height of a tank can vary depending on the type, size, and purpose of the tank.
How to calculate Section Modulus of Wind Girder?
Section Modulus of Wind Girder is a measure of the strength and stiffness of the girder in relation to bending under wind loads is calculated using Section Modulus = 0.059*Diameter of Tank^(2)*Height of Tank. To calculate Section Modulus of Wind Girder, you need Diameter of Tank (DTank) & Height of Tank (H). With our tool, you need to enter the respective value for Diameter of Tank & Height of Tank and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!