Saturated Unit Weight given Weighted Friction Angle Calculator

✖Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water.ⓘ Submerged Unit Weight [γ^']			+10% -10%
✖Internal Friction Angle with Weighted Frict. Angle is a measure of the shear strength of a soil due to friction, considering angle of internal friction.ⓘ Internal Friction Angle with Weighted Frict. Angle [φ_iw]			+10% -10%
✖Weighted Friction Angle is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.ⓘ Weighted Friction Angle [φ_w]			+10% -10%

✖Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.ⓘ Saturated Unit Weight given Weighted Friction Angle [γ_sat]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Taylor's Stability Number and Stability Curves Formulas PDF PDF Image

Saturated Unit Weight given Weighted Friction Angle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle
γ_sat = (γ^'*φ_iw)/φ_w
This formula uses 4 Variables

Variables Used

Saturated Unit Weight - (Measured in Newton per Cubic Meter) - Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.
Submerged Unit Weight - (Measured in Newton per Cubic Meter) - Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water.
Internal Friction Angle with Weighted Frict. Angle - (Measured in Radian) - Internal Friction Angle with Weighted Frict. Angle is a measure of the shear strength of a soil due to friction, considering angle of internal friction.
Weighted Friction Angle - (Measured in Radian) - Weighted Friction Angle is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.

STEP 1: Convert Input(s) to Base Unit

Submerged Unit Weight: 31 Newton per Cubic Meter --> 31 Newton per Cubic Meter No Conversion Required
Internal Friction Angle with Weighted Frict. Angle: 41.85 Degree --> 0.73042029195949 Radian (Check conversion here)
Weighted Friction Angle: 130 Degree --> 2.2689280275922 Radian (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_sat = (γ^'*φ_iw)/φ_w --> (31*0.73042029195949)/2.2689280275922

Evaluating ... ...

γ_sat = 9.9796153846154

STEP 3: Convert Result to Output's Unit

9.9796153846154 Newton per Cubic Meter --> No Conversion Required

FINAL ANSWER

9.9796153846154 ≈ 9.979615 Newton per Cubic Meter <-- Saturated Unit Weight

(Calculation completed in 00.012 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Stability of Slopes In Earthen Dams » Taylor's Stability Number and Stability Curves » Saturated Unit Weight given Weighted Friction Angle

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Taylor's Stability Number and Stability Curves Calculators

Submerged Unit Weight given Factor of Safety with respect to Shear Strength

LaTeX Go Submerged Unit Weight = tan((Weighted Friction Angle*pi)/180)/((1/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil*pi)/180)/Factor of Safety))

Saturated Unit Weight given Factor of Safety with respect to Shear Strength

LaTeX Go Saturated Unit Weight = ((Submerged Unit Weight/tan((Weighted Friction Angle for Internal Friction)))*(tan((Angle of Internal Friction))/Factor of Safety))

Factor of Safety with respect to Shear Strength

LaTeX Go Factor of Safety = ((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction))/tan((Weighted Friction Angle for Internal Friction))))

Weighted Friction Angle given Factor of Safety with respect to Shear Strength

LaTeX Go Weighted Friction Angle = atan((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil))/Factor of Safety))

Saturated Unit Weight given Weighted Friction Angle Formula

LaTeX Go

Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle
γ_sat = (γ^'*φ_iw)/φ_w

What is Saturated Unit Weight?

Saturated unit weight is equal to the bulk density when the total voids is filled up with water.Buoyant unit weight or submerged unit weight is the effective mass per unit volume when the soil is submerged below standing water or below the ground water table.

How to Calculate Saturated Unit Weight given Weighted Friction Angle?

Saturated Unit Weight given Weighted Friction Angle calculator uses Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle to calculate the Saturated Unit Weight, The Saturated Unit Weight given Weighted Friction Angle is defined as the weight of soil per unit volume under saturated conditions, defined by the weighted friction angle. Saturated Unit Weight is denoted by γ_sat symbol.

How to calculate Saturated Unit Weight given Weighted Friction Angle using this online calculator? To use this online calculator for Saturated Unit Weight given Weighted Friction Angle, enter Submerged Unit Weight (γ^'), Internal Friction Angle with Weighted Frict. Angle (φ_iw) & Weighted Friction Angle (φ_w) and hit the calculate button. Here is how the Saturated Unit Weight given Weighted Friction Angle calculation can be explained with given input values -> 9.979615 = (31*0.73042029195949)/2.2689280275922.

FAQ

What is Saturated Unit Weight given Weighted Friction Angle?

The Saturated Unit Weight given Weighted Friction Angle is defined as the weight of soil per unit volume under saturated conditions, defined by the weighted friction angle and is represented as γ_sat = (γ^'*φ_iw)/φ_w or Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle. Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water, Internal Friction Angle with Weighted Frict. Angle is a measure of the shear strength of a soil due to friction, considering angle of internal friction & Weighted Friction Angle is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.

How to calculate Saturated Unit Weight given Weighted Friction Angle?

The Saturated Unit Weight given Weighted Friction Angle is defined as the weight of soil per unit volume under saturated conditions, defined by the weighted friction angle is calculated using Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle. To calculate Saturated Unit Weight given Weighted Friction Angle, you need Submerged Unit Weight (γ^'), Internal Friction Angle with Weighted Frict. Angle (φ_iw) & Weighted Friction Angle (φ_w). With our tool, you need to enter the respective value for Submerged Unit Weight, Internal Friction Angle with Weighted Frict. Angle & Weighted Friction Angle and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Saturated Unit Weight?

In this formula, Saturated Unit Weight uses Submerged Unit Weight, Internal Friction Angle with Weighted Frict. Angle & Weighted Friction Angle. We can use 3 other way(s) to calculate the same, which is/are as follows -

Saturated Unit Weight = ((Submerged Unit Weight/tan((Weighted Friction Angle for Internal Friction)))*(tan((Angle of Internal Friction))/Factor of Safety))
Saturated Unit Weight = (Submerged Unit Weight*Angle of Mobilized Friction)/Weighted Friction Angle
Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety)

Home

FREE PDFs

🔍 Search