Saturated Unit Weight given Weighted and Effective Friction Angle Calculator

✖Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water.ⓘ Submerged Unit Weight [γ^']			+10% -10%
✖Effective Angle of Internal Friction is the shear strength of soil due to the friction between soil particles when subjected to effective stress.ⓘ Effective Angle of Internal Friction [φ']			+10% -10%
✖Weighted Friction Angle for Internal Friction is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.ⓘ Weighted Friction Angle for Internal Friction [φ_IF]			+10% -10%
✖Factor of Safety is a measure of the load-carrying capacity of a structure or material compared to the actual load or stress that is applied to it.ⓘ Factor of Safety [f_s]			+10% -10%

✖Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.ⓘ Saturated Unit Weight given Weighted and Effective Friction Angle [γ_sat]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Taylor's Stability Number and Stability Curves Formulas PDF PDF Image

Saturated Unit Weight given Weighted and Effective Friction Angle Solution

STEP 0: Pre-Calculation Summary

Formula Used

Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety)
γ_sat = (γ^'*φ')/(φ_IF*f_s)
This formula uses 5 Variables

Variables Used

Saturated Unit Weight - (Measured in Newton per Cubic Meter) - Saturated Unit Weight is the value of the unit weight of the soil when the soil is completely saturated with water that is all the soil pores are completely filled with water.
Submerged Unit Weight - (Measured in Newton per Cubic Meter) - Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water.
Effective Angle of Internal Friction - (Measured in Radian) - Effective Angle of Internal Friction is the shear strength of soil due to the friction between soil particles when subjected to effective stress.
Weighted Friction Angle for Internal Friction - (Measured in Radian) - Weighted Friction Angle for Internal Friction is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis.
Factor of Safety - Factor of Safety is a measure of the load-carrying capacity of a structure or material compared to the actual load or stress that is applied to it.

STEP 1: Convert Input(s) to Base Unit

Submerged Unit Weight: 31 Newton per Cubic Meter --> 31 Newton per Cubic Meter No Conversion Required
Effective Angle of Internal Friction: 9.99 Degree --> 0.174358392274201 Radian (Check conversion here)
Weighted Friction Angle for Internal Friction: 11 Degree --> 0.19198621771934 Radian (Check conversion here)
Factor of Safety: 2.8 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

γ_sat = (γ^'*φ')/(φ_IF*f_s) --> (31*0.174358392274201)/(0.19198621771934*2.8)

Evaluating ... ...

γ_sat = 10.0548701298702

STEP 3: Convert Result to Output's Unit

10.0548701298702 Newton per Cubic Meter --> No Conversion Required

FINAL ANSWER

10.0548701298702 ≈ 10.05487 Newton per Cubic Meter <-- Saturated Unit Weight

(Calculation completed in 00.005 seconds)

You are here -

Home » Engineering » Civil » Geotechnical Engineering » Stability of Slopes In Earthen Dams » Taylor's Stability Number and Stability Curves » Saturated Unit Weight given Weighted and Effective Friction Angle

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Taylor's Stability Number and Stability Curves Calculators

Submerged Unit Weight given Factor of Safety with respect to Shear Strength

LaTeX Go Submerged Unit Weight = tan((Weighted Friction Angle*pi)/180)/((1/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil*pi)/180)/Factor of Safety))

Saturated Unit Weight given Factor of Safety with respect to Shear Strength

LaTeX Go Saturated Unit Weight = ((Submerged Unit Weight/tan((Weighted Friction Angle for Internal Friction)))*(tan((Angle of Internal Friction))/Factor of Safety))

Factor of Safety with respect to Shear Strength

LaTeX Go Factor of Safety = ((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction))/tan((Weighted Friction Angle for Internal Friction))))

Weighted Friction Angle given Factor of Safety with respect to Shear Strength

LaTeX Go Weighted Friction Angle = atan((Submerged Unit Weight/Saturated Unit Weight)*(tan((Angle of Internal Friction of Soil))/Factor of Safety))

Saturated Unit Weight given Weighted and Effective Friction Angle Formula

LaTeX Go

Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety)
γ_sat = (γ^'*φ')/(φ_IF*f_s)

What is Saturated Unit Weight?

Saturated unit weight is equal to the bulk density when the total voids is filled up with water.Buoyant unit weight or submerged unit weight is the effective mass per unit volume when the soil is submerged below standing water or below the ground water table.

How to Calculate Saturated Unit Weight given Weighted and Effective Friction Angle?

Saturated Unit Weight given Weighted and Effective Friction Angle calculator uses Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety) to calculate the Saturated Unit Weight, The Saturated Unit Weight given Weighted and Effective Friction Angle formula is defined as the density of fully saturated soil, considering weighted and effective friction angles which describe soil shear strength under specific conditions. Saturated Unit Weight is denoted by γ_sat symbol.

How to calculate Saturated Unit Weight given Weighted and Effective Friction Angle using this online calculator? To use this online calculator for Saturated Unit Weight given Weighted and Effective Friction Angle, enter Submerged Unit Weight (γ^'), Effective Angle of Internal Friction (φ'), Weighted Friction Angle for Internal Friction (φ_IF) & Factor of Safety (f_s) and hit the calculate button. Here is how the Saturated Unit Weight given Weighted and Effective Friction Angle calculation can be explained with given input values -> 10.05487 = (31*0.174358392274201)/(0.19198621771934*2.8).

FAQ

What is Saturated Unit Weight given Weighted and Effective Friction Angle?

The Saturated Unit Weight given Weighted and Effective Friction Angle formula is defined as the density of fully saturated soil, considering weighted and effective friction angles which describe soil shear strength under specific conditions and is represented as γ_sat = (γ^'*φ')/(φ_IF*f_s) or Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety). Submerged Unit Weight is the effective weight of the soil per unit volume when it is submerged in water, Effective Angle of Internal Friction is the shear strength of soil due to the friction between soil particles when subjected to effective stress, Weighted Friction Angle for Internal Friction is an effective measure combining materials' friction properties and their relative contributions in geotechnical engineering for stability analysis & Factor of Safety is a measure of the load-carrying capacity of a structure or material compared to the actual load or stress that is applied to it.

How to calculate Saturated Unit Weight given Weighted and Effective Friction Angle?

The Saturated Unit Weight given Weighted and Effective Friction Angle formula is defined as the density of fully saturated soil, considering weighted and effective friction angles which describe soil shear strength under specific conditions is calculated using Saturated Unit Weight = (Submerged Unit Weight*Effective Angle of Internal Friction)/(Weighted Friction Angle for Internal Friction*Factor of Safety). To calculate Saturated Unit Weight given Weighted and Effective Friction Angle, you need Submerged Unit Weight (γ^'), Effective Angle of Internal Friction (φ'), Weighted Friction Angle for Internal Friction (φ_IF) & Factor of Safety (f_s). With our tool, you need to enter the respective value for Submerged Unit Weight, Effective Angle of Internal Friction, Weighted Friction Angle for Internal Friction & Factor of Safety and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Saturated Unit Weight?

In this formula, Saturated Unit Weight uses Submerged Unit Weight, Effective Angle of Internal Friction, Weighted Friction Angle for Internal Friction & Factor of Safety. We can use 3 other way(s) to calculate the same, which is/are as follows -

Saturated Unit Weight = ((Submerged Unit Weight/tan((Weighted Friction Angle for Internal Friction)))*(tan((Angle of Internal Friction))/Factor of Safety))
Saturated Unit Weight = (Submerged Unit Weight*Angle of Mobilized Friction)/Weighted Friction Angle
Saturated Unit Weight = (Submerged Unit Weight*Internal Friction Angle with Weighted Frict. Angle)/Weighted Friction Angle

Home

FREE PDFs

🔍 Search