Sanitary Sewer System Flow Rate Calculator

✖Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows.ⓘ Cross Sectional Area [A]			+10% -10%
✖Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer.ⓘ Population Density of Area [P_d]			+10% -10%
✖Discharge refers to the volume of wastewater flowing through the sewer system per unit of time. It is usually measured in cubic meters per second (m³/s) or liters per second (L/s).ⓘ Discharge [Q]			+10% -10%

✖Sanitary System Sewer Flow Rate is the measure of the volume of wastewater flowing through a sewer system per unit of time.ⓘ Sanitary Sewer System Flow Rate [SS_fr]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Sanitary System Sewer Design Formulas PDF PDF Image

Sanitary Sewer System Flow Rate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge
SS_fr = A*P_d*Q
This formula uses 4 Variables

Variables Used

Sanitary System Sewer Flow Rate - (Measured in Cubic Meter per Second) - Sanitary System Sewer Flow Rate is the measure of the volume of wastewater flowing through a sewer system per unit of time.
Cross Sectional Area - (Measured in Square Meter) - Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows.
Population Density of Area - (Measured in Hundred per Square Meter) - Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer.
Discharge - (Measured in Cubic Meter per Second) - Discharge refers to the volume of wastewater flowing through the sewer system per unit of time. It is usually measured in cubic meters per second (m³/s) or liters per second (L/s).

STEP 1: Convert Input(s) to Base Unit

Cross Sectional Area: 50 Square Meter --> 50 Square Meter No Conversion Required
Population Density of Area: 23.76 Hundred per Square Kilometer --> 2.376E-05 Hundred per Square Meter (Check conversion here)
Discharge: 1.01 Cubic Meter per Second --> 1.01 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

SS_fr = A*P_d*Q --> 50*2.376E-05*1.01

Evaluating ... ...

SS_fr = 0.00119988

STEP 3: Convert Result to Output's Unit

0.00119988 Cubic Meter per Second -->1.19988 Liter per Second (Check conversion here)

FINAL ANSWER

1.19988 Liter per Second <-- Sanitary System Sewer Flow Rate

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Sanitary System Sewer Design » Sanitary Sewer System Flow Rate

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Sanitary System Sewer Design Calculators

Sanitary Sewer System Flow Rate

LaTeX Go Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge

Manning's Formula for Conveyance Factor given Flow Rate through Pipe

LaTeX Go Conveyance Factor = Waste Water Flow/sqrt(Hydraulic Gradient)

Flow Rate through Pipe using Manning Formula

LaTeX Go Waste Water Flow = Conveyance Factor*(Hydraulic Gradient)^1/2

Manning's Formula for Pipe Slope given Flow Rate through Pipe

LaTeX Go Hydraulic Gradient = (Waste Water Flow/Conveyance Factor)^2

Sanitary Sewer System Flow Rate Formula

LaTeX Go

Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge
SS_fr = A*P_d*Q

What is Flow Rate?

Flow Rate or rate of flow is a measure of the volume of fluid passing a point in a system per unit time. It is an essential concept in various fields, including hydraulics, fluid mechanics, and environmental engineering, as it helps in understanding and managing the movement of fluids in pipes, channels, and other systems.

How to Calculate Sanitary Sewer System Flow Rate?

Sanitary Sewer System Flow Rate calculator uses Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge to calculate the Sanitary System Sewer Flow Rate, The Sanitary Sewer System Flow Rate formula is defined as the sewer system is designed to collect and transport wastewater from residential, commercial, and industrial sources to treatment facilities, ensuring public health and environmental protection. Sanitary System Sewer Flow Rate is denoted by SS_fr symbol.

How to calculate Sanitary Sewer System Flow Rate using this online calculator? To use this online calculator for Sanitary Sewer System Flow Rate, enter Cross Sectional Area (A), Population Density of Area (P_d) & Discharge (Q) and hit the calculate button. Here is how the Sanitary Sewer System Flow Rate calculation can be explained with given input values -> 1199.88 = 50*2.376E-05*1.01.

FAQ

What is Sanitary Sewer System Flow Rate?

The Sanitary Sewer System Flow Rate formula is defined as the sewer system is designed to collect and transport wastewater from residential, commercial, and industrial sources to treatment facilities, ensuring public health and environmental protection and is represented as SS_fr = A*P_d*Q or Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge. Cross Sectional Area is typically determined based on the geometry of the pipe or channel through which the wastewater flows, Population Density of Area refers to the measurement of the number of people per unit area in a defined geographical area, typically expressed as the number of individuals per square kilometer & Discharge refers to the volume of wastewater flowing through the sewer system per unit of time. It is usually measured in cubic meters per second (m³/s) or liters per second (L/s).

How to calculate Sanitary Sewer System Flow Rate?

The Sanitary Sewer System Flow Rate formula is defined as the sewer system is designed to collect and transport wastewater from residential, commercial, and industrial sources to treatment facilities, ensuring public health and environmental protection is calculated using Sanitary System Sewer Flow Rate = Cross Sectional Area*Population Density of Area*Discharge. To calculate Sanitary Sewer System Flow Rate, you need Cross Sectional Area (A), Population Density of Area (P_d) & Discharge (Q). With our tool, you need to enter the respective value for Cross Sectional Area, Population Density of Area & Discharge and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search