Safe tensile stress in plate Calculator

✖Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.ⓘ Tensile Load [P_load]			+10% -10%
✖Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.ⓘ Pitch of Rivet [p]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Safe tensile stress in plate [σ_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Safe tensile stress in plate Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate)
σ_t = P_load/((p-D_rivet)*t_plate)
This formula uses 5 Variables

Variables Used

Tensile Stress - (Measured in Pascal) - Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.
Tensile Load - (Measured in Newton) - Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.
Pitch of Rivet - (Measured in Meter) - Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Tensile Load: 0.012 Kilonewton --> 12 Newton (Check conversion here)
Pitch of Rivet: 20 Millimeter --> 0.02 Meter (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_t = P_load/((p-D_rivet)*t_plate) --> 12/((0.02-0.018)*0.012)

Evaluating ... ...

σ_t = 500000

STEP 3: Convert Result to Output's Unit

500000 Pascal -->0.5 Megapascal (Check conversion here)

FINAL ANSWER

0.5 Megapascal <-- Tensile Stress

(Calculation completed in 00.020 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Tearing of the Plate Between Rivets of a Row » Safe tensile stress in plate

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Tearing of the Plate Between Rivets of a Row Calculators

Safe tensile load that plate can withstand

LaTeX Go Tensile Load = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate

Area of plate for given safe tensile load that plate can withstand

LaTeX Go Area of Base Plate = Tensile Load/Tensile Stress

Safe tensile load that plate can withstand given area of plate

LaTeX Go Tensile Load = Tensile Stress*Area of Base Plate

Safe tensile stress given area of base plate and tensile load

LaTeX Go Tensile Stress = Tensile Load/Area of Base Plate

Safe tensile stress in plate Formula

LaTeX Go

Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate)
σ_t = P_load/((p-D_rivet)*t_plate)

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a top head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Safe tensile stress in plate?

Safe tensile stress in plate calculator uses Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate) to calculate the Tensile Stress, Safe tensile stress in plate is defined as the ratio between the strength of the material and the maximum stress in the part. Tensile Stress is denoted by σ_t symbol.

How to calculate Safe tensile stress in plate using this online calculator? To use this online calculator for Safe tensile stress in plate, enter Tensile Load (P_load), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Safe tensile stress in plate calculation can be explained with given input values -> 0.0004 = 12/((0.02-0.018)*0.012).

FAQ

What is Safe tensile stress in plate?

Safe tensile stress in plate is defined as the ratio between the strength of the material and the maximum stress in the part and is represented as σ_t = P_load/((p-D_rivet)*t_plate) or Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate). Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen, Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member, Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Safe tensile stress in plate?

Safe tensile stress in plate is defined as the ratio between the strength of the material and the maximum stress in the part is calculated using Tensile Stress = Tensile Load/((Pitch of Rivet-Rivet Diameter)*Thickness of Plate). To calculate Safe tensile stress in plate, you need Tensile Load (P_load), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Tensile Load, Pitch of Rivet, Rivet Diameter & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Tensile Stress?

In this formula, Tensile Stress uses Tensile Load, Pitch of Rivet, Rivet Diameter & Thickness of Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Tensile Stress = Tensile Load/Area of Base Plate

Home

FREE PDFs

🔍 Search