Safe shear stress given safe load for butt joint with double cover plates and double shear Calculator

✖Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.ⓘ Safe Load Joint [P_safe]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%

✖Safe shear stress is always less than the yield shear stress.ⓘ Safe shear stress given safe load for butt joint with double cover plates and double shear [T_safe]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Safe shear stress given safe load for butt joint with double cover plates and double shear Solution

STEP 0: Pre-Calculation Summary

Formula Used

Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
T_safe = P_safe/(2*(pi/4)*(D_rivet^2))
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.
Safe Load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

STEP 1: Convert Input(s) to Base Unit

Safe Load Joint: 4.5 Kilonewton --> 4500 Newton (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_safe = P_safe/(2*(pi/4)*(D_rivet^2)) --> 4500/(2*(pi/4)*(0.018^2))

Evaluating ... ...

T_safe = 8841941.28288308

STEP 3: Convert Result to Output's Unit

8841941.28288308 Pascal -->8.84194128288308 Megapascal (Check conversion here)

FINAL ANSWER

8.84194128288308 ≈ 8.841941 Megapascal <-- Safe Shear Stress

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Shearing of Rivet » Safe shear stress given safe load for butt joint with double cover plates and double shear

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))

Diameter of rivet given safe load per pitch length in double rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))

Safe Load per Pitch Length using Single Rivet Lap Joint

LaTeX Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Lap Joint

LaTeX Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe shear stress given safe load for butt joint with double cover plates and double shear Formula

LaTeX Go

Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
T_safe = P_safe/(2*(pi/4)*(D_rivet^2))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Safe shear stress given safe load for butt joint with double cover plates and double shear?

Safe shear stress given safe load for butt joint with double cover plates and double shear calculator uses Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)) to calculate the Safe Shear Stress, The Safe shear stress given safe load for butt joint with double cover plates and double shear formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force. Safe Shear Stress is denoted by T_safe symbol.

How to calculate Safe shear stress given safe load for butt joint with double cover plates and double shear using this online calculator? To use this online calculator for Safe shear stress given safe load for butt joint with double cover plates and double shear, enter Safe Load Joint (P_safe) & Rivet Diameter (D_rivet) and hit the calculate button. Here is how the Safe shear stress given safe load for butt joint with double cover plates and double shear calculation can be explained with given input values -> 5E-6 = 4500/(2*(pi/4)*(0.018^2)).

FAQ

What is Safe shear stress given safe load for butt joint with double cover plates and double shear?

The Safe shear stress given safe load for butt joint with double cover plates and double shear formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force and is represented as T_safe = P_safe/(2*(pi/4)*(D_rivet^2)) or Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)). Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device & Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

How to calculate Safe shear stress given safe load for butt joint with double cover plates and double shear?

The Safe shear stress given safe load for butt joint with double cover plates and double shear formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force is calculated using Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)). To calculate Safe shear stress given safe load for butt joint with double cover plates and double shear, you need Safe Load Joint (P_safe) & Rivet Diameter (D_rivet). With our tool, you need to enter the respective value for Safe Load Joint & Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Safe Shear Stress?

In this formula, Safe Shear Stress uses Safe Load Joint & Rivet Diameter. We can use 3 other way(s) to calculate the same, which is/are as follows -

Safe Shear Stress = Safe Load Joint/(1*(pi/4)*(Rivet Diameter^2))
Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
Safe Shear Stress = Safe Load Joint/(3*(pi/4)*(Rivet Diameter^2))

Home

FREE PDFs

🔍 Search