Safe shear stress given safe load for double rivet butt joint with single cover plates Solution

STEP 0: Pre-Calculation Summary
Formula Used
Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
Tsafe = Psafe/(2*(pi/4)*(Drivet^2))
This formula uses 1 Constants, 3 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.
Safe Load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
STEP 1: Convert Input(s) to Base Unit
Safe Load Joint: 4.5 Kilonewton --> 4500 Newton (Check conversion ​here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Tsafe = Psafe/(2*(pi/4)*(Drivet^2)) --> 4500/(2*(pi/4)*(0.018^2))
Evaluating ... ...
Tsafe = 8841941.28288308
STEP 3: Convert Result to Output's Unit
8841941.28288308 Pascal -->8.84194128288308 Megapascal (Check conversion ​here)
FINAL ANSWER
8.84194128288308 8.841941 Megapascal <-- Safe Shear Stress
(Calculation completed in 00.007 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has verified this Calculator and 1900+ more calculators!

Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint
​ LaTeX ​ Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))
Diameter of rivet given safe load per pitch length in double rivet lap joint
​ LaTeX ​ Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))
Safe Load per Pitch Length using Single Rivet Lap Joint
​ LaTeX ​ Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
Safe Load per Pitch Length using Double Rivet Lap Joint
​ LaTeX ​ Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe shear stress given safe load for double rivet butt joint with single cover plates Formula

​LaTeX ​Go
Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
Tsafe = Psafe/(2*(pi/4)*(Drivet^2))

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Safe shear stress given safe load for double rivet butt joint with single cover plates?

Safe shear stress given safe load for double rivet butt joint with single cover plates calculator uses Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)) to calculate the Safe Shear Stress, The Safe shear stress given safe load for double rivet butt joint with single cover plates formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force. Safe Shear Stress is denoted by Tsafe symbol.

How to calculate Safe shear stress given safe load for double rivet butt joint with single cover plates using this online calculator? To use this online calculator for Safe shear stress given safe load for double rivet butt joint with single cover plates, enter Safe Load Joint (Psafe) & Rivet Diameter (Drivet) and hit the calculate button. Here is how the Safe shear stress given safe load for double rivet butt joint with single cover plates calculation can be explained with given input values -> 5E-6 = 4500/(2*(pi/4)*(0.018^2)).

FAQ

What is Safe shear stress given safe load for double rivet butt joint with single cover plates?
The Safe shear stress given safe load for double rivet butt joint with single cover plates formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force and is represented as Tsafe = Psafe/(2*(pi/4)*(Drivet^2)) or Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)). Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device & Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
How to calculate Safe shear stress given safe load for double rivet butt joint with single cover plates?
The Safe shear stress given safe load for double rivet butt joint with single cover plates formula is always less than the yield shear stress. Therefore we are making rivet parts to experience less stress for the same amount of force is calculated using Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2)). To calculate Safe shear stress given safe load for double rivet butt joint with single cover plates, you need Safe Load Joint (Psafe) & Rivet Diameter (Drivet). With our tool, you need to enter the respective value for Safe Load Joint & Rivet Diameter and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Safe Shear Stress?
In this formula, Safe Shear Stress uses Safe Load Joint & Rivet Diameter. We can use 3 other way(s) to calculate the same, which is/are as follows -
  • Safe Shear Stress = Safe Load Joint/(1*(pi/4)*(Rivet Diameter^2))
  • Safe Shear Stress = Safe Load Joint/(2*(pi/4)*(Rivet Diameter^2))
  • Safe Shear Stress = Safe Load Joint/(3*(pi/4)*(Rivet Diameter^2))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!