Safe load which rivet can withstand against crushing Calculator

✖Crushing stress is a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest.ⓘ Crushing Stress [σ_c]			+10% -10%
✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.ⓘ Thickness of Plate [t_plate]			+10% -10%

✖Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.ⓘ Safe load which rivet can withstand against crushing [P_safe]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Safe load which rivet can withstand against crushing Solution

STEP 0: Pre-Calculation Summary

Formula Used

Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate
P_safe = σ_c*D_rivet*t_plate
This formula uses 4 Variables

Variables Used

Safe Load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Crushing Stress - (Measured in Pascal) - Crushing stress is a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Thickness of Plate - (Measured in Meter) - The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

STEP 1: Convert Input(s) to Base Unit

Crushing Stress: 20.83333 Megapascal --> 20833330 Pascal (Check conversion here)
Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Thickness of Plate: 12 Millimeter --> 0.012 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_safe = σ_c*D_rivet*t_plate --> 20833330*0.018*0.012

Evaluating ... ...

P_safe = 4499.99928

STEP 3: Convert Result to Output's Unit

4499.99928 Newton -->4.49999928 Kilonewton (Check conversion here)

FINAL ANSWER

4.49999928 ≈ 4.499999 Kilonewton <-- Safe Load Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Crushing of Rivet or Plate » Safe load which rivet can withstand against crushing

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Crushing of Rivet or Plate Calculators

Safe load which rivet can withstand against crushing

LaTeX Go Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate

Allowable crushing stress given safe load which rivet can withstand for given projected area

LaTeX Go Crushing Stress = Safe Load Joint/(Projected Area)

Projected area given safe load which rivet can withstand against crushing

LaTeX Go Projected Area = Safe Load Joint/(Crushing Stress)

Safe load which rivet can withstand against crushing given projected area

LaTeX Go Safe Load Joint = Crushing Stress*Projected Area

Safe load which rivet can withstand against crushing Formula

LaTeX Go

Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate
P_safe = σ_c*D_rivet*t_plate

What is tear and tensile strength?

Tear strength is the measure of how much tensile stress the material can withstand in a specific case, i.e. when a tear has been introduced in the material, whereas a normal tensile stress test is done for a non-defective piece of material.

How to Calculate Safe load which rivet can withstand against crushing?

Safe load which rivet can withstand against crushing calculator uses Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate to calculate the Safe Load Joint, The Safe load which rivet can withstand against crushing formula is defined as the manufacturer's recommended maximum weight load for a line, rope, crane or any other lifting device or component of a lifting device. Safe Load Joint is denoted by P_safe symbol.

How to calculate Safe load which rivet can withstand against crushing using this online calculator? To use this online calculator for Safe load which rivet can withstand against crushing, enter Crushing Stress (σ_c), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) and hit the calculate button. Here is how the Safe load which rivet can withstand against crushing calculation can be explained with given input values -> 0.000518 = 20833330*0.018*0.012.

FAQ

What is Safe load which rivet can withstand against crushing?

The Safe load which rivet can withstand against crushing formula is defined as the manufacturer's recommended maximum weight load for a line, rope, crane or any other lifting device or component of a lifting device and is represented as P_safe = σ_c*D_rivet*t_plate or Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate. Crushing stress is a special type of localized compressive stress which occurs at the surface of contact of two members that are relatively at rest, Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

How to calculate Safe load which rivet can withstand against crushing?

The Safe load which rivet can withstand against crushing formula is defined as the manufacturer's recommended maximum weight load for a line, rope, crane or any other lifting device or component of a lifting device is calculated using Safe Load Joint = Crushing Stress*Rivet Diameter*Thickness of Plate. To calculate Safe load which rivet can withstand against crushing, you need Crushing Stress (σ_c), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate). With our tool, you need to enter the respective value for Crushing Stress, Rivet Diameter & Thickness of Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Safe Load Joint?

In this formula, Safe Load Joint uses Crushing Stress, Rivet Diameter & Thickness of Plate. We can use 1 other way(s) to calculate the same, which is/are as follows -

Safe Load Joint = Crushing Stress*Projected Area

Home

FREE PDFs

🔍 Search