Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates Calculator

✖Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.ⓘ Rivet Diameter [D_rivet]			+10% -10%
✖Safe shear stress is always less than the yield shear stress.ⓘ Safe Shear Stress [T_safe]			+10% -10%

✖Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.ⓘ Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates [P_safe]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Strength of Materials Formula PDF PDF Image

Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates Solution

STEP 0: Pre-Calculation Summary

Formula Used

Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
P_safe = (2*(pi/4)*(D_rivet^2)*T_safe)
This formula uses 1 Constants, 3 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Variables Used

Safe Load Joint - (Measured in Newton) - Safe load Joint is the manufacturer's recommended maximum weight load for a line, rope, crane, or any other lifting device or component of a lifting device.
Rivet Diameter - (Measured in Meter) - Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.
Safe Shear Stress - (Measured in Pascal) - Safe shear stress is always less than the yield shear stress.

STEP 1: Convert Input(s) to Base Unit

Rivet Diameter: 18 Millimeter --> 0.018 Meter (Check conversion here)
Safe Shear Stress: 0.24 Megapascal --> 240000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_safe = (2*(pi/4)*(D_rivet^2)*T_safe) --> (2*(pi/4)*(0.018^2)*240000)

Evaluating ... ...

P_safe = 122.145122371571

STEP 3: Convert Result to Output's Unit

122.145122371571 Newton -->0.122145122371571 Kilonewton (Check conversion here)

FINAL ANSWER

0.122145122371571 ≈ 0.122145 Kilonewton <-- Safe Load Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Strength of Materials » Riveted Joint » Failure of A Riveted Joint » Mechanical » Failure Due to Shearing of Rivet » Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates

Credits

Created by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has created this Calculator and 2000+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Failure Due to Shearing of Rivet Calculators

Diameter of rivet given safe load per pitch length in single rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(1*(pi/4)*Safe Shear Stress))

Diameter of rivet given safe load per pitch length in double rivet lap joint

LaTeX Go Rivet Diameter = sqrt(Safe Load Joint/(2*(pi/4)*Safe Shear Stress))

Safe Load per Pitch Length using Single Rivet Lap Joint

LaTeX Go Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Lap Joint

LaTeX Go Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates Formula

LaTeX Go

Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
P_safe = (2*(pi/4)*(D_rivet^2)*T_safe)

What are rivets used for?

Rivets are ideal for supporting shear and tensile loads, as well as watertight applications. A rivet is a mechanical fastener consisting of a smooth, cylindrical shaft with a head. Upon installation, the end of the shaft expands, creating a “shop head” and fastening objects in place.

How to Calculate Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates?

Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates calculator uses Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress) to calculate the Safe Load Joint, The Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates formula is defined as a load on a structure that does not produce stresses in excess of allowable stresses. Safe Load Joint is denoted by P_safe symbol.

How to calculate Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates using this online calculator? To use this online calculator for Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates, enter Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe) and hit the calculate button. Here is how the Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates calculation can be explained with given input values -> 0.000217 = (2*(pi/4)*(0.018^2)*240000).

FAQ

What is Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates?

The Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates formula is defined as a load on a structure that does not produce stresses in excess of allowable stresses and is represented as P_safe = (2*(pi/4)*(D_rivet^2)*T_safe) or Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long & Safe shear stress is always less than the yield shear stress.

How to calculate Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates?

The Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates formula is defined as a load on a structure that does not produce stresses in excess of allowable stresses is calculated using Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress). To calculate Safe Load per Pitch Length using Double Rivet Butt Joint with Single Cover Plates, you need Rivet Diameter (D_rivet) & Safe Shear Stress (T_safe). With our tool, you need to enter the respective value for Rivet Diameter & Safe Shear Stress and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Safe Load Joint?

In this formula, Safe Load Joint uses Rivet Diameter & Safe Shear Stress. We can use 3 other way(s) to calculate the same, which is/are as follows -

Safe Load Joint = (1*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
Safe Load Joint = (2*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)
Safe Load Joint = (3*(pi/4)*(Rivet Diameter^2)*Safe Shear Stress)

Home

FREE PDFs

🔍 Search