Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope Calculator

✖Corrected Runway Takeoff Length is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.ⓘ Corrected Runway Takeoff Length [TOR_C]			+10% -10%
✖Corrected Takeoff Run is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.ⓘ Corrected Takeoff Run [TOR_Corrected]			+10% -10%

✖Runway Slope or gradient, is the difference in elevation from the beginning to the ending of the runway in percentage.ⓘ Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope [S_Slope]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Aircraft Runway Length Estimation Formulas PDF PDF Image

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope Solution

STEP 0: Pre-Calculation Summary

Formula Used

Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1)
S_Slope = (TOR_C-TOR_Corrected)/(TOR_Corrected*0.1)
This formula uses 3 Variables

Variables Used

Runway Slope - Runway Slope or gradient, is the difference in elevation from the beginning to the ending of the runway in percentage.
Corrected Runway Takeoff Length - (Measured in Meter) - Corrected Runway Takeoff Length is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.
Corrected Takeoff Run - (Measured in Meter) - Corrected Takeoff Run is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.

STEP 1: Convert Input(s) to Base Unit

Corrected Runway Takeoff Length: 4042 Meter --> 4042 Meter No Conversion Required
Corrected Takeoff Run: 4038 Meter --> 4038 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S_Slope = (TOR_C-TOR_Corrected)/(TOR_Corrected*0.1) --> (4042-4038)/(4038*0.1)

Evaluating ... ...

S_Slope = 0.00990589400693413

STEP 3: Convert Result to Output's Unit

0.00990589400693413 --> No Conversion Required

FINAL ANSWER

0.00990589400693413 ≈ 0.009906 <-- Runway Slope

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Transportation Engineering » Airport Planning and Design » Aircraft Runway Length Estimation » Runway Takeoff Length » Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Runway Takeoff Length Calculators

Runway Takeoff Length Corrected for Elevation and Temperature

LaTeX Go Corrected Takeoff Run = (Runway Take off Length Corrected*(Aerodrome Reference Temperature-Standard Temperature)*0.01)+Runway Take off Length Corrected

Runway Take off Length Corrected for Elevation, Temperature and Slope

LaTeX Go Corrected Runway Takeoff Length = (Corrected Takeoff Run*Runway Slope*0.1)+Corrected Takeoff Run

Runway Elevation given Runway Take off Length Corrected for Elevation

LaTeX Go Runway Elevation = ((Runway Take off Length Corrected-Takeoff Run)/(Takeoff Run*0.07))*300

Runway Take off Length Corrected for Elevation

LaTeX Go Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope Formula

LaTeX Go

Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1)
S_Slope = (TOR_C-TOR_Corrected)/(TOR_Corrected*0.1)

What is Lift force?

Lift is the force that directly opposes the weight of an airplane and holds the airplane in the air. Lift is a mechanical aerodynamic force produced by the motion of the airplane through the air. Because lift is a force, it is a vector quantity, having both a magnitude and a direction associated with it.

What is a normal takeoff?

A normal takeoff is one in which the airplane is headed into the wind, or the wind is very light. Also, the takeoff surface is firm and of sufficient length to permit the airplane to gradually accelerate to normal lift-off and climb-out speed, and there are no obstructions along the takeoff path.

How to Calculate Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope?

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope calculator uses Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1) to calculate the Runway Slope, Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope is the difference in elevation from the beginning to the end of the runway. Pilots use the slope, along with headwinds and tailwinds, to determine the speed needed for a successful takeoff and for a safe landing. Runway Slope is denoted by S_Slope symbol.

How to calculate Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope using this online calculator? To use this online calculator for Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope, enter Corrected Runway Takeoff Length (TOR_C) & Corrected Takeoff Run (TOR_Corrected) and hit the calculate button. Here is how the Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope calculation can be explained with given input values -> 0.009906 = (4042-4038)/(4038*0.1).

FAQ

What is Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope?

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope is the difference in elevation from the beginning to the end of the runway. Pilots use the slope, along with headwinds and tailwinds, to determine the speed needed for a successful takeoff and for a safe landing and is represented as S_Slope = (TOR_C-TOR_Corrected)/(TOR_Corrected*0.1) or Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1). Corrected Runway Takeoff Length is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water & Corrected Takeoff Run is the corrected distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.

How to calculate Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope?

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope is the difference in elevation from the beginning to the end of the runway. Pilots use the slope, along with headwinds and tailwinds, to determine the speed needed for a successful takeoff and for a safe landing is calculated using Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1). To calculate Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope, you need Corrected Runway Takeoff Length (TOR_C) & Corrected Takeoff Run (TOR_Corrected). With our tool, you need to enter the respective value for Corrected Runway Takeoff Length & Corrected Takeoff Run and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search