Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula Calculator

✖Percentage of Sand on weight basis present in the sediment deposit.ⓘ Percentage of Sand [p_sa]			+10% -10%
✖Unit Weight of Sand is the weight (mass multiplied by gravity) per unit volume of sand material at the end of the first year.ⓘ Unit Weight of Sand [W₁]			+10% -10%
✖Constant B1 is related to the compacting characteristics of the sediment components.ⓘ Constant B1 [B₁]			+10% -10%
✖Age of Sediment is the time elapsed since the material was deposited in years.ⓘ Age of Sediment [T]			+10% -10%
✖Percentage of Silt on weight basis present in the sediment deposit.ⓘ Percentage of Silt [p_si]			+10% -10%
✖Unit Weight of Silt is the weight (mass multiplied by gravity) per unit volume of silt material at the end of the first year.ⓘ Unit Weight of Silt [W₂]			+10% -10%
✖Constant B2 is related to the compacting characteristics of the sediment components.ⓘ Constant B2 [B₂]			+10% -10%
✖Percentage of Clay on weight basis present in the sediment deposit.ⓘ Percentage of Clay [p_cl]			+10% -10%
✖Unit Weight of Clay is the weight (mass multiplied by gravity) per unit volume of clay material at the end of the first year.ⓘ Unit Weight of Clay [W₃]			+10% -10%
✖Constant B3 is related to the compacting characteristics of the sediment components.ⓘ Constant B3 [B₃]			+10% -10%

✖Unit Weight of Deposit is the weight (mass multiplied by gravity) per unit volume of a sediment deposit of age T years.ⓘ Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula [W_T]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Erosion and Sediment Deposits Formulas PDF PDF Image

Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula Solution

STEP 0: Pre-Calculation Summary

Formula Used

Unit Weight of Deposit = ((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))+((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))+((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment)))
W_T = ((p_sa/100)*(W₁+B₁*log10(T)))+((p_si/100)*(W₂+B₂*log10(T)))+((p_cl/100)*(W₃+B₃*log10(T)))
This formula uses 1 Functions, 11 Variables

Functions Used

log10 - The common logarithm, also known as the base-10 logarithm or the decimal logarithm, is a mathematical function that is the inverse of the exponential function., log10(Number)

Variables Used

Unit Weight of Deposit - (Measured in Newton per Cubic Meter) - Unit Weight of Deposit is the weight (mass multiplied by gravity) per unit volume of a sediment deposit of age T years.
Percentage of Sand - Percentage of Sand on weight basis present in the sediment deposit.
Unit Weight of Sand - (Measured in Newton per Cubic Meter) - Unit Weight of Sand is the weight (mass multiplied by gravity) per unit volume of sand material at the end of the first year.
Constant B1 - Constant B1 is related to the compacting characteristics of the sediment components.
Age of Sediment - (Measured in Second) - Age of Sediment is the time elapsed since the material was deposited in years.
Percentage of Silt - Percentage of Silt on weight basis present in the sediment deposit.
Unit Weight of Silt - (Measured in Newton per Cubic Meter) - Unit Weight of Silt is the weight (mass multiplied by gravity) per unit volume of silt material at the end of the first year.
Constant B2 - Constant B2 is related to the compacting characteristics of the sediment components.
Percentage of Clay - Percentage of Clay on weight basis present in the sediment deposit.
Unit Weight of Clay - (Measured in Newton per Cubic Meter) - Unit Weight of Clay is the weight (mass multiplied by gravity) per unit volume of clay material at the end of the first year.
Constant B3 - Constant B3 is related to the compacting characteristics of the sediment components.

STEP 1: Convert Input(s) to Base Unit

Percentage of Sand: 20 --> No Conversion Required
Unit Weight of Sand: 16.4 Kilonewton per Cubic Meter --> 16400 Newton per Cubic Meter (Check conversion here)
Constant B1: 0.2 --> No Conversion Required
Age of Sediment: 25 Year --> 788923800 Second (Check conversion here)
Percentage of Silt: 35 --> No Conversion Required
Unit Weight of Silt: 19 Kilonewton per Cubic Meter --> 19000 Newton per Cubic Meter (Check conversion here)
Constant B2: 0.1 --> No Conversion Required
Percentage of Clay: 31.3 --> No Conversion Required
Unit Weight of Clay: 16 Kilonewton per Cubic Meter --> 16000 Newton per Cubic Meter (Check conversion here)
Constant B3: 40 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

W_T = ((p_sa/100)*(W₁+B₁*log10(T)))+((p_si/100)*(W₂+B₂*log10(T)))+((p_cl/100)*(W₃+B₃*log10(T))) --> ((20/100)*(16400+0.2*log10(788923800)))+((35/100)*(19000+0.1*log10(788923800)))+((31.3/100)*(16000+40*log10(788923800)))

Evaluating ... ...

W_T = 15050.0581565544

STEP 3: Convert Result to Output's Unit

15050.0581565544 Newton per Cubic Meter -->15.0500581565544 Kilonewton per Cubic Meter (Check conversion here)

FINAL ANSWER

15.0500581565544 ≈ 15.05006 Kilonewton per Cubic Meter <-- Unit Weight of Deposit

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Erosion and Sediment Deposits » Density of Sediment Deposits » Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Density of Sediment Deposits Calculators

Percentage of Sand given Unit Weight of Deposit

LaTeX Go Percentage of Sand = ((Average Unit Weight of Deposit)-((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))-((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment))))/((Unit Weight of Sand+Constant B1*log10(Age of Sediment))/100)

Percentage of Clay given Unit Weight of Deposit

LaTeX Go Percentage of Clay = ((Average Unit Weight of Deposit)-((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))-((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment))))/((Unit Weight of Clay+Constant B3*log10(Age of Sediment))/100)

Percentage of Silt for Unit Weight of Deposits

LaTeX Go Percentage of Silt = ((Average Unit Weight of Deposit)-((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))-((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment))))/((Unit Weight of Silt+Constant B2*log10(Age of Sediment))/100)

Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula

LaTeX Go Unit Weight of Deposit = ((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))+((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))+((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment)))

Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula Formula

LaTeX Go

What is Reservoir sedimentation?

Reservoir sedimentation is the gradual accumulation of the incoming sediment load from a river. This accumulation is a serious problem in many parts of the world and has severe consequences for water management, flood control, and production of energy.

How to Calculate Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula?

Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula calculator uses Unit Weight of Deposit = ((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))+((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))+((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment))) to calculate the Unit Weight of Deposit, The Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula is defined as the ratio of the dry weight of the sediment (say tonnes) to the unit volume (say in cubic meters) of the sediment deposit in the reservoir. Unit Weight of Deposit is denoted by W_T symbol.

How to calculate Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula using this online calculator? To use this online calculator for Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula, enter Percentage of Sand (p_sa), Unit Weight of Sand (W₁), Constant B1 (B₁), Age of Sediment (T), Percentage of Silt (p_si), Unit Weight of Silt (W₂), Constant B2 (B₂), Percentage of Clay (p_cl), Unit Weight of Clay (W₃) & Constant B3 (B₃) and hit the calculate button. Here is how the Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula calculation can be explained with given input values -> 0.01505 = ((20/100)*(16400+0.2*log10(788923800)))+((35/100)*(19000+0.1*log10(788923800)))+((31.3/100)*(16000+40*log10(788923800))).

FAQ

What is Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula?

The Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula is defined as the ratio of the dry weight of the sediment (say tonnes) to the unit volume (say in cubic meters) of the sediment deposit in the reservoir and is represented as W_T = ((p_sa/100)*(W₁+B₁*log10(T)))+((p_si/100)*(W₂+B₂*log10(T)))+((p_cl/100)*(W₃+B₃*log10(T))) or Unit Weight of Deposit = ((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))+((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))+((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment))). Percentage of Sand on weight basis present in the sediment deposit, Unit Weight of Sand is the weight (mass multiplied by gravity) per unit volume of sand material at the end of the first year, Constant B1 is related to the compacting characteristics of the sediment components, Age of Sediment is the time elapsed since the material was deposited in years, Percentage of Silt on weight basis present in the sediment deposit, Unit Weight of Silt is the weight (mass multiplied by gravity) per unit volume of silt material at the end of the first year, Constant B2 is related to the compacting characteristics of the sediment components, Percentage of Clay on weight basis present in the sediment deposit, Unit Weight of Clay is the weight (mass multiplied by gravity) per unit volume of clay material at the end of the first year & Constant B3 is related to the compacting characteristics of the sediment components.

How to calculate Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula?

The Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula is defined as the ratio of the dry weight of the sediment (say tonnes) to the unit volume (say in cubic meters) of the sediment deposit in the reservoir is calculated using Unit Weight of Deposit = ((Percentage of Sand/100)*(Unit Weight of Sand+Constant B1*log10(Age of Sediment)))+((Percentage of Silt/100)*(Unit Weight of Silt+Constant B2*log10(Age of Sediment)))+((Percentage of Clay/100)*(Unit Weight of Clay+Constant B3*log10(Age of Sediment))). To calculate Rough Estimation for Unit Weight of Deposit by Koelzer and Lara Formula, you need Percentage of Sand (p_sa), Unit Weight of Sand (W₁), Constant B1 (B₁), Age of Sediment (T), Percentage of Silt (p_si), Unit Weight of Silt (W₂), Constant B2 (B₂), Percentage of Clay (p_cl), Unit Weight of Clay (W₃) & Constant B3 (B₃). With our tool, you need to enter the respective value for Percentage of Sand, Unit Weight of Sand, Constant B1, Age of Sediment, Percentage of Silt, Unit Weight of Silt, Constant B2, Percentage of Clay, Unit Weight of Clay & Constant B3 and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search