Rotational frequency of workpiece given Number of workpiece revolution Calculator

✖Number of Workpiece Revolution is defined as the number of times the workpiece rotates completely about its axis during a machining operation.ⓘ Number of Workpiece Revolution [m]			+10% -10%
✖Time Taken for Spark-Out Operation is the period at the end of a grinding cycle where the grinding wheel is allowed to continue rotating without any feed with a reduced depth of cut.ⓘ Time Taken for Spark-Out Operation [t_s]			+10% -10%

✖Rotational Frequency is defined as the number of rotations around the axis per unit time or reciprocal of the time period of one complete rotation.ⓘ Rotational frequency of workpiece given Number of workpiece revolution [n_w]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Grinding Operation Formula PDF PDF Image

Rotational frequency of workpiece given Number of workpiece revolution Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rotational Frequency = Number of Workpiece Revolution/Time Taken for Spark-Out Operation
n_w = m/t_s
This formula uses 3 Variables

Variables Used

Rotational Frequency - (Measured in Hertz) - Rotational Frequency is defined as the number of rotations around the axis per unit time or reciprocal of the time period of one complete rotation.
Number of Workpiece Revolution - Number of Workpiece Revolution is defined as the number of times the workpiece rotates completely about its axis during a machining operation.
Time Taken for Spark-Out Operation - (Measured in Second) - Time Taken for Spark-Out Operation is the period at the end of a grinding cycle where the grinding wheel is allowed to continue rotating without any feed with a reduced depth of cut.

STEP 1: Convert Input(s) to Base Unit

Number of Workpiece Revolution: 3 --> No Conversion Required
Time Taken for Spark-Out Operation: 0.005 Minute --> 0.3 Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

n_w = m/t_s --> 3/0.3

Evaluating ... ...

n_w = 10

STEP 3: Convert Result to Output's Unit

10 Hertz --> No Conversion Required

FINAL ANSWER

10 Hertz <-- Rotational Frequency

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Analysis of Grinding Process » Cylindrical Grinding cycle » Workpiece » Rotational frequency of workpiece given Number of workpiece revolution

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< Workpiece Calculators

Diameter of workpiece given feed and machine infeed speed

LaTeX Go Grinding Workpiece Diameter = Workpiece Removal Parameter per Unit Time*Diameter of Grinding Tool Wheel*((Machine Infeed Speed/Feed Speed)-1)/Wheel Removal Parameter per Unit Time

Surface speed of workpiece given constant for grinding wheel

LaTeX Go Surface Speed of Workpiece in Grinding = (Maximum Undeformed Chip Thickness^2)*Surface Speed of Wheel in Grinding/(Constant for Particular Grinding Wheel*sqrt(The Feed))

Diameter of workpiece given Metal removal rate

LaTeX Go Grinding Workpiece Diameter = Metal Removal Rate (MRR)/(Feed Speed*pi*The Width of Grinding Path)

Surface Speed of workpiece given Metal removal rate during grinding

LaTeX Go Surface Speed of Workpiece in Grinding = Material Removal Rate (MRR)/(The Feed*The Width of Grinding Path)

Rotational frequency of workpiece given Number of workpiece revolution Formula

LaTeX Go

Rotational Frequency = Number of Workpiece Revolution/Time Taken for Spark-Out Operation
n_w = m/t_s

What is the difference between angular frequency and frequency?

Angular frequency ω (in radians per second), is larger than frequency ν (in cycles per second, also called Hz), by a factor of 2π. This figure uses the symbol ν, rather than f to denote frequency. A sphere rotating around an axis. Points farther from the axis move faster, satisfying ω=v/r.

How to Calculate Rotational frequency of workpiece given Number of workpiece revolution?

Rotational frequency of workpiece given Number of workpiece revolution calculator uses Rotational Frequency = Number of Workpiece Revolution/Time Taken for Spark-Out Operation to calculate the Rotational Frequency, Rotational frequency of workpiece given Number of workpiece revolution is the frequency at which the workpiece is rotating during the grinding process, based on the number of revolutions it completes and the time taken for those revolutions. Rotational Frequency is denoted by n_w symbol.

How to calculate Rotational frequency of workpiece given Number of workpiece revolution using this online calculator? To use this online calculator for Rotational frequency of workpiece given Number of workpiece revolution, enter Number of Workpiece Revolution (m) & Time Taken for Spark-Out Operation (t_s) and hit the calculate button. Here is how the Rotational frequency of workpiece given Number of workpiece revolution calculation can be explained with given input values -> 0.1 = 3/0.3.

FAQ

What is Rotational frequency of workpiece given Number of workpiece revolution?

Rotational frequency of workpiece given Number of workpiece revolution is the frequency at which the workpiece is rotating during the grinding process, based on the number of revolutions it completes and the time taken for those revolutions and is represented as n_w = m/t_s or Rotational Frequency = Number of Workpiece Revolution/Time Taken for Spark-Out Operation. Number of Workpiece Revolution is defined as the number of times the workpiece rotates completely about its axis during a machining operation & Time Taken for Spark-Out Operation is the period at the end of a grinding cycle where the grinding wheel is allowed to continue rotating without any feed with a reduced depth of cut.

How to calculate Rotational frequency of workpiece given Number of workpiece revolution?

Rotational frequency of workpiece given Number of workpiece revolution is the frequency at which the workpiece is rotating during the grinding process, based on the number of revolutions it completes and the time taken for those revolutions is calculated using Rotational Frequency = Number of Workpiece Revolution/Time Taken for Spark-Out Operation. To calculate Rotational frequency of workpiece given Number of workpiece revolution, you need Number of Workpiece Revolution (m) & Time Taken for Spark-Out Operation (t_s). With our tool, you need to enter the respective value for Number of Workpiece Revolution & Time Taken for Spark-Out Operation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search