Rod Diameter of Knuckle Joint given Thickness of Fork Eye Calculator

✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Fork Eye of Knuckle Joint [a]

+10%

-10%

✖Diameter of Knuckle Joint is the length of the largest cord of the circular face of the knuckle joint.ⓘ Rod Diameter of Knuckle Joint given Thickness of Fork Eye [d_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Knuckle Joint Formulas PDF PDF Image

Rod Diameter of Knuckle Joint given Thickness of Fork Eye Solution

STEP 0: Pre-Calculation Summary

Formula Used

Diameter of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75
d_r = a/0.75
This formula uses 2 Variables

Variables Used

Diameter of Knuckle Joint - (Measured in Meter) - Diameter of Knuckle Joint is the length of the largest cord of the circular face of the knuckle joint.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

STEP 1: Convert Input(s) to Base Unit

Thickess of Fork Eye of Knuckle Joint: 26.6 Millimeter --> 0.0266 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d_r = a/0.75 --> 0.0266/0.75

Evaluating ... ...

d_r = 0.0354666666666667

STEP 3: Convert Result to Output's Unit

0.0354666666666667 Meter -->35.4666666666667 Millimeter (Check conversion here)

FINAL ANSWER

35.4666666666667 ≈ 35.46667 Millimeter <-- Diameter of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Mechanical » Rod » Rod Diameter of Knuckle Joint given Thickness of Fork Eye

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< Rod Calculators

Diameter of Rod of Knuckle Joint given Tensile Stress in Rod

LaTeX Go Diameter of Knuckle Joint = sqrt((4*Load on Knuckle Joint)/(pi*Tensile Stress in Knuckle Joint Rod))

Diameter of Rod of Knuckle Joint given its Enlarged Diameter near Joint

LaTeX Go Diameter of Knuckle Joint = Enlarged Diameter of Knuckle Joint Rod/1.1

Enlarged Diameter of Rod of Knuckle Joint near Joint

LaTeX Go Enlarged Diameter of Knuckle Joint Rod = 1.1*Diameter of Knuckle Joint

Rod Diameter of Knuckle Joint given Thickness of Eye

LaTeX Go Diameter of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25

Rod Diameter of Knuckle Joint given Thickness of Fork Eye Formula

LaTeX Go

Diameter of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75
d_r = a/0.75

Buckling failure

Buckling is a creasing failure by crumpling of a longitudinal structural member loaded eccentrically with a compressive force. It occurs to long and slender members subject to axial compressive stress. Buckling load is a compressive load at which a column or strut begins to buckle. Steel columns are more prone to buckling than concrete columns because they are more slender. Also slender beams and floor joists fail due to compressive stresses resulting from the bending.

How to Calculate Rod Diameter of Knuckle Joint given Thickness of Fork Eye?

Rod Diameter of Knuckle Joint given Thickness of Fork Eye calculator uses Diameter of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75 to calculate the Diameter of Knuckle Joint, The Rod diameter of knuckle joint given thickness of fork eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint. Diameter of Knuckle Joint is denoted by d_r symbol.

How to calculate Rod Diameter of Knuckle Joint given Thickness of Fork Eye using this online calculator? To use this online calculator for Rod Diameter of Knuckle Joint given Thickness of Fork Eye, enter Thickess of Fork Eye of Knuckle Joint (a) and hit the calculate button. Here is how the Rod Diameter of Knuckle Joint given Thickness of Fork Eye calculation can be explained with given input values -> 35466.67 = 0.0266/0.75.

FAQ

What is Rod Diameter of Knuckle Joint given Thickness of Fork Eye?

The Rod diameter of knuckle joint given thickness of fork eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint and is represented as d_r = a/0.75 or Diameter of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75. Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

How to calculate Rod Diameter of Knuckle Joint given Thickness of Fork Eye?

The Rod diameter of knuckle joint given thickness of fork eye is the diameter of the rod at the ends of the fork and the eye of the knuckle joint is calculated using Diameter of Knuckle Joint = Thickess of Fork Eye of Knuckle Joint/0.75. To calculate Rod Diameter of Knuckle Joint given Thickness of Fork Eye, you need Thickess of Fork Eye of Knuckle Joint (a). With our tool, you need to enter the respective value for Thickess of Fork Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Diameter of Knuckle Joint?

In this formula, Diameter of Knuckle Joint uses Thickess of Fork Eye of Knuckle Joint. We can use 3 other way(s) to calculate the same, which is/are as follows -

Diameter of Knuckle Joint = sqrt((4*Load on Knuckle Joint)/(pi*Tensile Stress in Knuckle Joint Rod))
Diameter of Knuckle Joint = Enlarged Diameter of Knuckle Joint Rod/1.1
Diameter of Knuckle Joint = Thickess of Eye of Knuckle Joint/1.25

Home

FREE PDFs

🔍 Search