RMS Voltage using Load Current (Two-Phase Three-Wire OS) Calculator

✖Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.ⓘ Power Transmitted [P]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%
✖Current Overhead AC is defined as the current flowing through the overhead ac supply wire.ⓘ Current Overhead AC [I]			+10% -10%

✖Root Mean Square Voltage is the square root of the time average of the voltage squared.ⓘ RMS Voltage using Load Current (Two-Phase Three-Wire OS) [V_rms]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

RMS Voltage using Load Current (Two-Phase Three-Wire OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC)
V_rms = P/(2*cos(Φ)*I)
This formula uses 1 Functions, 4 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Root Mean Square Voltage - (Measured in Volt) - Root Mean Square Voltage is the square root of the time average of the voltage squared.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Current Overhead AC - (Measured in Ampere) - Current Overhead AC is defined as the current flowing through the overhead ac supply wire.

STEP 1: Convert Input(s) to Base Unit

Power Transmitted: 890 Watt --> 890 Watt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Current Overhead AC: 6.9 Ampere --> 6.9 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_rms = P/(2*cos(Φ)*I) --> 890/(2*cos(0.5235987755982)*6.9)

Evaluating ... ...

V_rms = 74.4698173302561

STEP 3: Convert Result to Output's Unit

74.4698173302561 Volt --> No Conversion Required

FINAL ANSWER

74.4698173302561 ≈ 74.46982 Volt <-- Root Mean Square Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead AC Supply » 2 3 Wire System » Current and Voltage » RMS Voltage using Load Current (Two-Phase Three-Wire OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Current and Voltage Calculators

Maximum Voltage using Area of X-Section(Two-Phase Three-Wire OS)

LaTeX Go Maximum Voltage Overhead AC = sqrt((Length of Overhead AC Wire*Resistivity*(Power Transmitted^2)*(2+sqrt(2)))/(2*Area of Overhead AC Wire*Line Losses*((cos(Phase Difference))^2)))

Load Current using Area of X-Section(Two-Phase Three-Wire OS)

LaTeX Go Current Overhead AC = sqrt(Line Losses*Area of Overhead AC Wire/((2+sqrt(2))*Resistivity*Length of Overhead AC Wire))

Load Current(Two-Phase Three-Wire OS)

LaTeX Go Current Overhead AC = Power Transmitted/(sqrt(2)*Maximum Voltage Overhead AC*cos(Phase Difference))

Maximum Voltage(Two-Phase Three-Wire OS)

LaTeX Go Voltage Overhead AC = (1)*Maximum Voltage Overhead AC

RMS Voltage using Load Current (Two-Phase Three-Wire OS) Formula

LaTeX Go

Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC)
V_rms = P/(2*cos(Φ)*I)

What is 2-phase 3-wire overhead system?

A 2-phase, 3-wire AC system has a middle conductor of the same cross-sectional area as the outer and supplies a load of 20 MW. The system is converted into 3-phase, 4-wire system by running a neutral wire. Calculate the new power which can be supplied if the voltage across the consumer terminal and percentage line losses remain the same.

How to Calculate RMS Voltage using Load Current (Two-Phase Three-Wire OS)?

RMS Voltage using Load Current (Two-Phase Three-Wire OS) calculator uses Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC) to calculate the Root Mean Square Voltage, The RMS Voltage using Load Current (two-phase three-wire OS) formula is defined as the square root of the time average of the voltage squared. Root Mean Square Voltage is denoted by V_rms symbol.

How to calculate RMS Voltage using Load Current (Two-Phase Three-Wire OS) using this online calculator? To use this online calculator for RMS Voltage using Load Current (Two-Phase Three-Wire OS), enter Power Transmitted (P), Phase Difference (Φ) & Current Overhead AC (I) and hit the calculate button. Here is how the RMS Voltage using Load Current (Two-Phase Three-Wire OS) calculation can be explained with given input values -> 74.46982 = 890/(2*cos(0.5235987755982)*6.9).

FAQ

What is RMS Voltage using Load Current (Two-Phase Three-Wire OS)?

The RMS Voltage using Load Current (two-phase three-wire OS) formula is defined as the square root of the time average of the voltage squared and is represented as V_rms = P/(2*cos(Φ)*I) or Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC). Power Transmitted is defined as the product of current and voltage phasor in a overhead ac line at the receiving end, Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit & Current Overhead AC is defined as the current flowing through the overhead ac supply wire.

How to calculate RMS Voltage using Load Current (Two-Phase Three-Wire OS)?

The RMS Voltage using Load Current (two-phase three-wire OS) formula is defined as the square root of the time average of the voltage squared is calculated using Root Mean Square Voltage = Power Transmitted/(2*cos(Phase Difference)*Current Overhead AC). To calculate RMS Voltage using Load Current (Two-Phase Three-Wire OS), you need Power Transmitted (P), Phase Difference (Φ) & Current Overhead AC (I). With our tool, you need to enter the respective value for Power Transmitted, Phase Difference & Current Overhead AC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Root Mean Square Voltage?

In this formula, Root Mean Square Voltage uses Power Transmitted, Phase Difference & Current Overhead AC. We can use 2 other way(s) to calculate the same, which is/are as follows -

Root Mean Square Voltage = sqrt(((2+sqrt(2))*Length of Overhead AC Wire*Resistivity*(Power Transmitted^2))/(Area of Overhead AC Wire*Line Losses*((cos(Phase Difference))^2)))
Root Mean Square Voltage = Power Transmitted*sqrt((2+sqrt(2))*Resistivity*Length of Overhead AC Wire/(2*Area of Overhead AC Wire*Line Losses))/cos(Phase Difference)

Home

FREE PDFs

🔍 Search