Respective Salinities at Location given Inflow Flow in Wedge Calculator

✖Inflow in the Wedge influencing the net outflow through the cross section.ⓘ Inflow in the Wedge [Q_W]			+10% -10%
✖Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.ⓘ Salinity at the Location 2 [S₂]			+10% -10%
✖Net Outflow through the Cross Section is the volume flowing through that cross section.ⓘ Net Outflow through the Cross Section [Q₁]			+10% -10%

✖Salinity at the Location 1, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.ⓘ Respective Salinities at Location given Inflow Flow in Wedge [S]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Coastal and Ocean Engineering Formula PDF PDF Image

Respective Salinities at Location given Inflow Flow in Wedge Solution

STEP 0: Pre-Calculation Summary

Formula Used

Salinity at the Location 1 = (Inflow in the Wedge*Salinity at the Location 2)/Net Outflow through the Cross Section
S = (Q_W*S₂)/Q₁
This formula uses 4 Variables

Variables Used

Salinity at the Location 1 - Salinity at the Location 1, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.
Inflow in the Wedge - (Measured in Cubic Meter per Second) - Inflow in the Wedge influencing the net outflow through the cross section.
Salinity at the Location 2 - Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water.
Net Outflow through the Cross Section - (Measured in Cubic Meter per Second) - Net Outflow through the Cross Section is the volume flowing through that cross section.

STEP 1: Convert Input(s) to Base Unit

Inflow in the Wedge: 45 Cubic Meter per Second --> 45 Cubic Meter per Second No Conversion Required
Salinity at the Location 2: 11 --> No Conversion Required
Net Outflow through the Cross Section: 50 Cubic Meter per Second --> 50 Cubic Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

S = (Q_W*S₂)/Q₁ --> (45*11)/50

Evaluating ... ...

S = 9.9

STEP 3: Convert Result to Output's Unit

9.9 --> No Conversion Required

FINAL ANSWER

9.9 <-- Salinity at the Location 1

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Density Currents in Rivers » Static Salt Wedge » Respective Salinities at Location given Inflow Flow in Wedge

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Static Salt Wedge Calculators

Non-dimensional Intrusion or Salt Wedge Length

LaTeX Go Non-dimensional Intrusion or Salt Wedge Length = (Quadratic Drag Coefficient*Intrusion Length)/Shoreline Depth

Fresh Water River Flow given Net Outflow through Cross-section

LaTeX Go Fresh Water River Flow = Net Outflow through the Cross Section-Inflow in the Wedge

Inflow to Wedge given Net Outflow through Cross-section

LaTeX Go Inflow in the Wedge = Net Outflow through the Cross Section-Fresh Water River Flow

Net Outflow through Cross-section

LaTeX Go Net Outflow through the Cross Section = Fresh Water River Flow+Inflow in the Wedge

Respective Salinities at Location given Inflow Flow in Wedge Formula

LaTeX Go

Salinity at the Location 1 = (Inflow in the Wedge*Salinity at the Location 2)/Net Outflow through the Cross Section
S = (Q_W*S₂)/Q₁

What is Inflow and Outflow of Water?

Inflow is adding water to the different aspects of the hydrologic system. Consequently, outflow is the removal of water from the hydrological cycle. Inflow adds water to different aspects of the hydrologic cycle, returning water storage to an even level.

What is the definition of Salt Wedging?

Salt wedging in an estuary is the process by which a distinct layer of saltwater forms below a layer of freshwater due to differences in density. Salt wedging is the result of weak tidal currents that cannot mix the saltwater with the freshwater, thus creating a halocline.

How to Calculate Respective Salinities at Location given Inflow Flow in Wedge?

Respective Salinities at Location given Inflow Flow in Wedge calculator uses Salinity at the Location 1 = (Inflow in the Wedge*Salinity at the Location 2)/Net Outflow through the Cross Section to calculate the Salinity at the Location 1, The Respective Salinities at Location given Inflow Flow in Wedge formula is defined as saltiness or the amount of salt dissolved in a body of water, called saline water. Salinity at the Location 1 is denoted by S symbol.

How to calculate Respective Salinities at Location given Inflow Flow in Wedge using this online calculator? To use this online calculator for Respective Salinities at Location given Inflow Flow in Wedge, enter Inflow in the Wedge (Q_W), Salinity at the Location 2 (S₂) & Net Outflow through the Cross Section (Q₁) and hit the calculate button. Here is how the Respective Salinities at Location given Inflow Flow in Wedge calculation can be explained with given input values -> 9.9 = (45*11)/50.

FAQ

What is Respective Salinities at Location given Inflow Flow in Wedge?

The Respective Salinities at Location given Inflow Flow in Wedge formula is defined as saltiness or the amount of salt dissolved in a body of water, called saline water and is represented as S = (Q_W*S₂)/Q₁ or Salinity at the Location 1 = (Inflow in the Wedge*Salinity at the Location 2)/Net Outflow through the Cross Section. Inflow in the Wedge influencing the net outflow through the cross section, Salinity at the Location 2, Salinity is the saltiness or amount of salt dissolved in a body of water, called saline water & Net Outflow through the Cross Section is the volume flowing through that cross section.

How to calculate Respective Salinities at Location given Inflow Flow in Wedge?

The Respective Salinities at Location given Inflow Flow in Wedge formula is defined as saltiness or the amount of salt dissolved in a body of water, called saline water is calculated using Salinity at the Location 1 = (Inflow in the Wedge*Salinity at the Location 2)/Net Outflow through the Cross Section. To calculate Respective Salinities at Location given Inflow Flow in Wedge, you need Inflow in the Wedge (Q_W), Salinity at the Location 2 (S₂) & Net Outflow through the Cross Section (Q₁). With our tool, you need to enter the respective value for Inflow in the Wedge, Salinity at the Location 2 & Net Outflow through the Cross Section and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search