Resistivity using Line Losses(Two-Wire Mid-Point Earthed) Solution

STEP 0: Pre-Calculation Summary
Formula Used
Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC)
ρ = (Vm^2)*Ploss*2*A/((P^2)*L)
This formula uses 6 Variables
Variables Used
Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Maximum Voltage Overhead DC - (Measured in Volt) - Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead DC line when in use.
Area of Overhead DC Wire - (Measured in Square Meter) - Area of Overhead DC Wire is defined as the cross-sectional area of the wire of an overhead DC supply system.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end.
Length of Wire DC - (Measured in Meter) - Length of Wire DC is the total length of the wire from one end to other end.
STEP 1: Convert Input(s) to Base Unit
Maximum Voltage Overhead DC: 60.26 Volt --> 60.26 Volt No Conversion Required
Line Losses: 0.74 Watt --> 0.74 Watt No Conversion Required
Area of Overhead DC Wire: 0.65 Square Meter --> 0.65 Square Meter No Conversion Required
Power Transmitted: 920 Watt --> 920 Watt No Conversion Required
Length of Wire DC: 12.7 Meter --> 12.7 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
ρ = (Vm^2)*Ploss*2*A/((P^2)*L) --> (60.26^2)*0.74*2*0.65/((920^2)*12.7)
Evaluating ... ...
ρ = 0.000324977992125984
STEP 3: Convert Result to Output's Unit
0.000324977992125984 Ohm Meter --> No Conversion Required
FINAL ANSWER
0.000324977992125984 0.000325 Ohm Meter <-- Resistivity
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has verified this Calculator and 1200+ more calculators!

Resistance and Resistivity Calculators

Resistivity using Line Losses(Two-Wire Mid-Point Earthed)
​ LaTeX ​ Go Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC)
Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)
​ LaTeX ​ Go Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2)
Resistance(Two-Wire Mid-Point Earthed)
​ LaTeX ​ Go Resistance Overhead DC = Resistivity*Length of Wire DC/Area of Overhead DC Wire
Resistance using Line Losses(Two-Wire Mid-Point Earthed)
​ LaTeX ​ Go Resistance Overhead DC = Line Losses/(2*(Current Overhead DC^2))

Resistivity using Line Losses(Two-Wire Mid-Point Earthed) Formula

​LaTeX ​Go
Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC)
ρ = (Vm^2)*Ploss*2*A/((P^2)*L)

What is the Volume of two-wire mid-point earthed system?

The volume of conductor material required in a two-wire mid-point earthed system is one-fourth of that required in a two-wire dc System with one conductor earthed.

How to Calculate Resistivity using Line Losses(Two-Wire Mid-Point Earthed)?

Resistivity using Line Losses(Two-Wire Mid-Point Earthed) calculator uses Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC) to calculate the Resistivity, The Resistivity using Line Losses(Two-Wire Mid-point Earthed) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors. Resistivity is denoted by ρ symbol.

How to calculate Resistivity using Line Losses(Two-Wire Mid-Point Earthed) using this online calculator? To use this online calculator for Resistivity using Line Losses(Two-Wire Mid-Point Earthed), enter Maximum Voltage Overhead DC (Vm), Line Losses (Ploss), Area of Overhead DC Wire (A), Power Transmitted (P) & Length of Wire DC (L) and hit the calculate button. Here is how the Resistivity using Line Losses(Two-Wire Mid-Point Earthed) calculation can be explained with given input values -> 0.000325 = (60.26^2)*0.74*2*0.65/((920^2)*12.7).

FAQ

What is Resistivity using Line Losses(Two-Wire Mid-Point Earthed)?
The Resistivity using Line Losses(Two-Wire Mid-point Earthed) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors and is represented as ρ = (Vm^2)*Ploss*2*A/((P^2)*L) or Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC). Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Line Losses is defined as the total losses occurring in an Overhead DC line when in use, Area of Overhead DC Wire is defined as the cross-sectional area of the wire of an overhead DC supply system, Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end & Length of Wire DC is the total length of the wire from one end to other end.
How to calculate Resistivity using Line Losses(Two-Wire Mid-Point Earthed)?
The Resistivity using Line Losses(Two-Wire Mid-point Earthed) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors is calculated using Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC). To calculate Resistivity using Line Losses(Two-Wire Mid-Point Earthed), you need Maximum Voltage Overhead DC (Vm), Line Losses (Ploss), Area of Overhead DC Wire (A), Power Transmitted (P) & Length of Wire DC (L). With our tool, you need to enter the respective value for Maximum Voltage Overhead DC, Line Losses, Area of Overhead DC Wire, Power Transmitted & Length of Wire DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Resistivity?
In this formula, Resistivity uses Maximum Voltage Overhead DC, Line Losses, Area of Overhead DC Wire, Power Transmitted & Length of Wire DC. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!