Resistivity using Area of X-Section (1-Phase 2-Wire US) Calculator

✖Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system.ⓘ Area of Underground AC Wire [A]			+10% -10%
✖Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.ⓘ Maximum Voltage Underground AC [V_m]			+10% -10%
✖Line Losses is defined as the total losses occurring in an Underground AC line when in use.ⓘ Line Losses [P_loss]			+10% -10%
✖Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.ⓘ Phase Difference [Φ]			+10% -10%
✖Length of Underground AC Wire is the total length of the wire from one end to other end.ⓘ Length of Underground AC Wire [L]			+10% -10%
✖Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.ⓘ Power Transmitted [P]			+10% -10%

✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity using Area of X-Section (1-Phase 2-Wire US) [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Resistivity using Area of X-Section (1-Phase 2-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2))
ρ = A*(V_m^2)*P_loss*((cos(Φ))^2)/((4)*L*(P^2))
This formula uses 1 Functions, 7 Variables

Functions Used

cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)

Variables Used

Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Area of Underground AC Wire - (Measured in Square Meter) - Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system.
Maximum Voltage Underground AC - (Measured in Volt) - Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Underground AC line when in use.
Phase Difference - (Measured in Radian) - Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit.
Length of Underground AC Wire - (Measured in Meter) - Length of Underground AC Wire is the total length of the wire from one end to other end.
Power Transmitted - (Measured in Watt) - Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.

STEP 1: Convert Input(s) to Base Unit

Area of Underground AC Wire: 1.28 Square Meter --> 1.28 Square Meter No Conversion Required
Maximum Voltage Underground AC: 230 Volt --> 230 Volt No Conversion Required
Line Losses: 2.67 Watt --> 2.67 Watt No Conversion Required
Phase Difference: 30 Degree --> 0.5235987755982 Radian (Check conversion here)
Length of Underground AC Wire: 24 Meter --> 24 Meter No Conversion Required
Power Transmitted: 300 Watt --> 300 Watt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = A*(V_m^2)*P_loss*((cos(Φ))^2)/((4)*L*(P^2)) --> 1.28*(230^2)*2.67*((cos(0.5235987755982))^2)/((4)*24*(300^2))

Evaluating ... ...

ρ = 0.0156936666666667

STEP 3: Convert Result to Output's Unit

0.0156936666666667 Ohm Meter --> No Conversion Required

FINAL ANSWER

0.0156936666666667 ≈ 0.015694 Ohm Meter <-- Resistivity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground AC Supply » 1 Φ 2 Wire System » Resistance and Resistivity » Resistivity using Area of X-Section (1-Phase 2-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Resistance and Resistivity Calculators

Resistivity using Area of X-Section (1-Phase 2-Wire US)

LaTeX Go Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2))

Resistivity using Volume of Conductor Material (1-Phase 2-Wire US)

LaTeX Go Resistivity = Volume Of Conductor*Line Losses*(Maximum Voltage Underground AC*(cos(Phase Difference)))^2/(8*(Power Transmitted*Length of Underground AC Wire)^2)

Resistance (1-Phase 2-Wire US)

LaTeX Go Resistance Underground AC = Resistivity*Length of Underground AC Wire/Area of Underground AC Wire

Resistance using Volume of Conductor Material (1-Phase 2-Wire US)

LaTeX Go Resistance Underground AC = Volume Of Conductor*Resistivity/(2*(Area of Underground AC Wire^2))

Resistivity using Area of X-Section (1-Phase 2-Wire US) Formula

LaTeX Go

What is the value of maximum voltage and volume of conductor material in 1-phase 2-wire system?

The volume of conductor material required in this system is 2/cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is v_m so that r.m.s. value of voltage between them is v_m/√2.

How to Calculate Resistivity using Area of X-Section (1-Phase 2-Wire US)?

Resistivity using Area of X-Section (1-Phase 2-Wire US) calculator uses Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2)) to calculate the Resistivity, The Resistivity using Area of X-Section (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors. Resistivity is denoted by ρ symbol.

How to calculate Resistivity using Area of X-Section (1-Phase 2-Wire US) using this online calculator? To use this online calculator for Resistivity using Area of X-Section (1-Phase 2-Wire US), enter Area of Underground AC Wire (A), Maximum Voltage Underground AC (V_m), Line Losses (P_loss), Phase Difference (Φ), Length of Underground AC Wire (L) & Power Transmitted (P) and hit the calculate button. Here is how the Resistivity using Area of X-Section (1-Phase 2-Wire US) calculation can be explained with given input values -> 0.015694 = 1.28*(230^2)*2.67*((cos(0.5235987755982))^2)/((4)*24*(300^2)).

FAQ

What is Resistivity using Area of X-Section (1-Phase 2-Wire US)?

The Resistivity using Area of X-Section (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors and is represented as ρ = A*(V_m^2)*P_loss*((cos(Φ))^2)/((4)*L*(P^2)) or Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2)). Area of Underground AC Wire is defined as the cross-sectional area of the wire of an AC supply system, Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Line Losses is defined as the total losses occurring in an Underground AC line when in use, Phase Difference is defined as the difference between the phasor of apparent and real power (in degrees) or between voltage and current in an ac circuit, Length of Underground AC Wire is the total length of the wire from one end to other end & Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.

How to calculate Resistivity using Area of X-Section (1-Phase 2-Wire US)?

The Resistivity using Area of X-Section (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors is calculated using Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2)). To calculate Resistivity using Area of X-Section (1-Phase 2-Wire US), you need Area of Underground AC Wire (A), Maximum Voltage Underground AC (V_m), Line Losses (P_loss), Phase Difference (Φ), Length of Underground AC Wire (L) & Power Transmitted (P). With our tool, you need to enter the respective value for Area of Underground AC Wire, Maximum Voltage Underground AC, Line Losses, Phase Difference, Length of Underground AC Wire & Power Transmitted and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Resistivity?

In this formula, Resistivity uses Area of Underground AC Wire, Maximum Voltage Underground AC, Line Losses, Phase Difference, Length of Underground AC Wire & Power Transmitted. We can use 3 other way(s) to calculate the same, which is/are as follows -

Resistivity = Volume Of Conductor*Line Losses*(Maximum Voltage Underground AC*(cos(Phase Difference)))^2/(8*(Power Transmitted*Length of Underground AC Wire)^2)
Resistivity = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC)^2*Length of Underground AC Wire)
Resistivity = Line Losses*Area of Underground AC Wire*(Maximum Voltage Underground AC*cos(Phase Difference))^2/(4*(Power Transmitted)^2*Length of Underground AC Wire)

Home

FREE PDFs

🔍 Search