Resistance using Losses in Nominal Pi Method Solution

STEP 0: Pre-Calculation Summary
Formula Used
Resistance in PI = Power Loss in PI/Load Current in PI^2
Rpi = Ploss(pi)/IL(pi)^2
This formula uses 3 Variables
Variables Used
Resistance in PI - (Measured in Ohm) - Resistance in PI is a measure of the opposition to current flow in a medium length transmission line.
Power Loss in PI - (Measured in Watt) - Power Loss in PI is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line.
Load Current in PI - (Measured in Ampere) - The Load Current in PI is the current that the appliance is drawing at that instant.
STEP 1: Convert Input(s) to Base Unit
Power Loss in PI: 85.2 Watt --> 85.2 Watt No Conversion Required
Load Current in PI: 3.36 Ampere --> 3.36 Ampere No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Rpi = Ploss(pi)/IL(pi)^2 --> 85.2/3.36^2
Evaluating ... ...
Rpi = 7.54676870748299
STEP 3: Convert Result to Output's Unit
7.54676870748299 Ohm --> No Conversion Required
FINAL ANSWER
7.54676870748299 7.546769 Ohm <-- Resistance in PI
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has created this Calculator and 1500+ more calculators!
Verifier Image
Verified by Shobhit Dimri
Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat
Shobhit Dimri has verified this Calculator and 100+ more calculators!

Nominal Pi Method in Medium Line Calculators

Receiving End Voltage using Sending End Power in Nominal Pi Method
​ LaTeX ​ Go Receiving End Voltage in PI = (Sending End Power in PI-Power Loss in PI)/(Receiving End Current in PI*cos(Receiving End Phase Angle in PI))
Load Current using Losses in Nominal Pi Method
​ LaTeX ​ Go Load Current in PI = sqrt(Power Loss in PI/Resistance in PI)
Losses in Nominal Pi Method
​ LaTeX ​ Go Power Loss in PI = (Load Current in PI^2)*Resistance in PI
Resistance using Losses in Nominal Pi Method
​ LaTeX ​ Go Resistance in PI = Power Loss in PI/Load Current in PI^2

Resistance using Losses in Nominal Pi Method Formula

​LaTeX ​Go
Resistance in PI = Power Loss in PI/Load Current in PI^2
Rpi = Ploss(pi)/IL(pi)^2

Which of the following transmission line can be considered as a medium transmission line?

The transmission lines having a length of more than 80 Km and less than 200 Km are considered medium transmission lines. Their operating voltage is more than short transmission lines but less than long transmission lines.

How to Calculate Resistance using Losses in Nominal Pi Method?

Resistance using Losses in Nominal Pi Method calculator uses Resistance in PI = Power Loss in PI/Load Current in PI^2 to calculate the Resistance in PI, The Resistance using Losses in Nominal Pi method formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance in PI is denoted by Rpi symbol.

How to calculate Resistance using Losses in Nominal Pi Method using this online calculator? To use this online calculator for Resistance using Losses in Nominal Pi Method, enter Power Loss in PI (Ploss(pi)) & Load Current in PI (IL(pi)) and hit the calculate button. Here is how the Resistance using Losses in Nominal Pi Method calculation can be explained with given input values -> 7.546769 = 85.2/3.36^2.

FAQ

What is Resistance using Losses in Nominal Pi Method?
The Resistance using Losses in Nominal Pi method formula is defined as a measure of the opposition to current flow in an electrical circuit and is represented as Rpi = Ploss(pi)/IL(pi)^2 or Resistance in PI = Power Loss in PI/Load Current in PI^2. Power Loss in PI is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line & The Load Current in PI is the current that the appliance is drawing at that instant.
How to calculate Resistance using Losses in Nominal Pi Method?
The Resistance using Losses in Nominal Pi method formula is defined as a measure of the opposition to current flow in an electrical circuit is calculated using Resistance in PI = Power Loss in PI/Load Current in PI^2. To calculate Resistance using Losses in Nominal Pi Method, you need Power Loss in PI (Ploss(pi)) & Load Current in PI (IL(pi)). With our tool, you need to enter the respective value for Power Loss in PI & Load Current in PI and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!