Resistance using Losses in End Condenser Method Calculator

✖Power Loss in ECM is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line.ⓘ Power Loss in ECM [P_loss(ecm)]			+10% -10%
✖Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.ⓘ Sending End Current in ECM [I_s(ecm)]			+10% -10%

✖Resistance in ECM is a measure of the opposition to current flow in a medium length transmission line.ⓘ Resistance using Losses in End Condenser Method [R_ecm]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download End Condenser Method in Medium Line Formulas PDF PDF Image

Resistance using Losses in End Condenser Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2)
R_ecm = P_loss(ecm)/(3*I_s(ecm)^2)
This formula uses 3 Variables

Variables Used

Resistance in ECM - (Measured in Ohm) - Resistance in ECM is a measure of the opposition to current flow in a medium length transmission line.
Power Loss in ECM - (Measured in Watt) - Power Loss in ECM is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line.
Sending End Current in ECM - (Measured in Ampere) - Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.

STEP 1: Convert Input(s) to Base Unit

Power Loss in ECM: 85 Watt --> 85 Watt No Conversion Required
Sending End Current in ECM: 16 Ampere --> 16 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_ecm = P_loss(ecm)/(3*I_s(ecm)^2) --> 85/(3*16^2)

Evaluating ... ...

R_ecm = 0.110677083333333

STEP 3: Convert Result to Output's Unit

0.110677083333333 Ohm --> No Conversion Required

FINAL ANSWER

0.110677083333333 ≈ 0.110677 Ohm <-- Resistance in ECM

(Calculation completed in 00.008 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » End Condenser Method in Medium Line » Resistance using Losses in End Condenser Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< End Condenser Method in Medium Line Calculators

Sending End Voltage in End Condenser Method

LaTeX Go Sending End Voltage in ECM = Receiving End Voltage in ECM+(Sending End Current in ECM*Impedance in ECM)

Receiving End Current in End Condenser Method

LaTeX Go Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM

Sending End Current in End Condenser Method

LaTeX Go Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM

Capacitive Current in End Condenser Method

LaTeX Go Capacitive Current in ECM = Sending End Current in ECM-Receiving End Current in ECM

Resistance using Losses in End Condenser Method Formula

LaTeX Go

Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2)
R_ecm = P_loss(ecm)/(3*I_s(ecm)^2)

What are the disadvantages of condenser end?

Although the end condenser method for the solution of medium lines is simple to work out calculations, yet it has the following drawbacks. There is a considerable error (about 10%) in calculations because the distributed capacitance has been assumed to be lumped or concentrated.

What is end condenser method?

In this method, the capacitance of the line is lumped or concentrated at the receiving or load end. This method of localizing the line capacitance at the load end overestimates the effects of capacitance.

How to Calculate Resistance using Losses in End Condenser Method?

Resistance using Losses in End Condenser Method calculator uses Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2) to calculate the Resistance in ECM, The Resistance using Losses in End Condenser Method formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms. Resistance in ECM is denoted by R_ecm symbol.

How to calculate Resistance using Losses in End Condenser Method using this online calculator? To use this online calculator for Resistance using Losses in End Condenser Method, enter Power Loss in ECM (P_loss(ecm)) & Sending End Current in ECM (I_s(ecm)) and hit the calculate button. Here is how the Resistance using Losses in End Condenser Method calculation can be explained with given input values -> 0.110677 = 85/(3*16^2).

FAQ

What is Resistance using Losses in End Condenser Method?

The Resistance using Losses in End Condenser Method formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms and is represented as R_ecm = P_loss(ecm)/(3*I_s(ecm)^2) or Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2). Power Loss in ECM is defined as the deviation in the power transferred from sending end to receiving end of a medium transmission line & Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.

How to calculate Resistance using Losses in End Condenser Method?

The Resistance using Losses in End Condenser Method formula is defined as a measure of the opposition to current flow in an electrical circuit. Resistance is measured in ohms is calculated using Resistance in ECM = Power Loss in ECM/(3*Sending End Current in ECM^2). To calculate Resistance using Losses in End Condenser Method, you need Power Loss in ECM (P_loss(ecm)) & Sending End Current in ECM (I_s(ecm)). With our tool, you need to enter the respective value for Power Loss in ECM & Sending End Current in ECM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search