Repetition Frequency of Pulse Calculator

✖Spectral Line Frequency is the specific frequency at which an atom, molecule, or other substance absorbs or emits electromagnetic radiation.ⓘ Spectral Line Frequency [f_sl]			+10% -10%
✖Carrier frequency refers to the central frequency of a spectral line that carries information about a particular physical phenomenon, such as the emission or absorption of light by atoms or molecules.ⓘ Carrier Frequency [f_c]			+10% -10%
✖The Number of Samples of a continuous-time signal is the total samples in the output sample signal.ⓘ Number of Samples [N_s]			+10% -10%

✖Repetition frequency refers to the frequency at which a waveform or signal repeats itself over time.ⓘ Repetition Frequency of Pulse [f_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Magnetron Oscillator Formulas PDF PDF Image

Repetition Frequency of Pulse Solution

STEP 0: Pre-Calculation Summary

Formula Used

Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples
f_r = (f_sl-f_c)/N_s
This formula uses 4 Variables

Variables Used

Repetition Frequency - (Measured in Hertz) - Repetition frequency refers to the frequency at which a waveform or signal repeats itself over time.
Spectral Line Frequency - (Measured in Hertz) - Spectral Line Frequency is the specific frequency at which an atom, molecule, or other substance absorbs or emits electromagnetic radiation.
Carrier Frequency - (Measured in Hertz) - Carrier frequency refers to the central frequency of a spectral line that carries information about a particular physical phenomenon, such as the emission or absorption of light by atoms or molecules.
Number of Samples - The Number of Samples of a continuous-time signal is the total samples in the output sample signal.

STEP 1: Convert Input(s) to Base Unit

Spectral Line Frequency: 10.25 Hertz --> 10.25 Hertz No Conversion Required
Carrier Frequency: 3.1 Hertz --> 3.1 Hertz No Conversion Required
Number of Samples: 5 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_r = (f_sl-f_c)/N_s --> (10.25-3.1)/5

Evaluating ... ...

f_r = 1.43

STEP 3: Convert Result to Output's Unit

1.43 Hertz --> No Conversion Required

FINAL ANSWER

1.43 Hertz <-- Repetition Frequency

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » Microwave Theory » Microwave Tubes and Circuits » Magnetron Oscillator » Repetition Frequency of Pulse

Credits

Created by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has created this Calculator and 900+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Magnetron Oscillator Calculators

Repetition Frequency of Pulse

LaTeX Go Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples

Receiver Sensitivity

LaTeX Go Receiver Sensitivity = Receiver Noise Floor+Signal Noise Ratio

Characteristic Admittance

LaTeX Go Characteristic Admittance = 1/Characteristic Impedance

RF Pulse Width

LaTeX Go RF Pulse Width = 1/(2*Bandwidth)

Repetition Frequency of Pulse Formula

LaTeX Go

Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples
f_r = (f_sl-f_c)/N_s

What is meant by spectral line frequency?

A typical spectral line in the visible region of the spectrum has a wavelength of 5.8 × 10-5 cm; this wavelength corresponds to a frequency (ν) of 5.17 × 1014 Hz (hertz equals one cycle per second) obtained from the equation.

How to Calculate Repetition Frequency of Pulse?

Repetition Frequency of Pulse calculator uses Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples to calculate the Repetition Frequency, The Repetition Frequency of Pulse formula is defined as the number of ultrasound pulses emitted by the transducer over a designated period of time. Repetition Frequency is denoted by f_r symbol.

How to calculate Repetition Frequency of Pulse using this online calculator? To use this online calculator for Repetition Frequency of Pulse, enter Spectral Line Frequency (f_sl), Carrier Frequency (f_c) & Number of Samples (N_s) and hit the calculate button. Here is how the Repetition Frequency of Pulse calculation can be explained with given input values -> 1.43 = (10.25-3.1)/5.

FAQ

What is Repetition Frequency of Pulse?

The Repetition Frequency of Pulse formula is defined as the number of ultrasound pulses emitted by the transducer over a designated period of time and is represented as f_r = (f_sl-f_c)/N_s or Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples. Spectral Line Frequency is the specific frequency at which an atom, molecule, or other substance absorbs or emits electromagnetic radiation, Carrier frequency refers to the central frequency of a spectral line that carries information about a particular physical phenomenon, such as the emission or absorption of light by atoms or molecules & The Number of Samples of a continuous-time signal is the total samples in the output sample signal.

How to calculate Repetition Frequency of Pulse?

The Repetition Frequency of Pulse formula is defined as the number of ultrasound pulses emitted by the transducer over a designated period of time is calculated using Repetition Frequency = (Spectral Line Frequency-Carrier Frequency)/Number of Samples. To calculate Repetition Frequency of Pulse, you need Spectral Line Frequency (f_sl), Carrier Frequency (f_c) & Number of Samples (N_s). With our tool, you need to enter the respective value for Spectral Line Frequency, Carrier Frequency & Number of Samples and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search