Resultant Load on Bolt Calculator

✖Initial Preload in Bolt Due to Tightening of Nut is defined as the difference between the resultant load on the bolt and change in external load.ⓘ Initial Preload in Bolt Due to Tightening of Nut [P_i]			+10% -10%
✖Change in External Load is the amount of variation in the externally applied force or load.ⓘ Change in External Load [ΔP_i]			+10% -10%

✖Resultant Load on Bolt is the total resultant force/load acting on the bolt after tightening the bolt.ⓘ Resultant Load on Bolt [P_b]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Structural Response and Force Analysis Formulas PDF PDF Image

Resultant Load on Bolt Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resultant Load on Bolt = Initial Preload in Bolt Due to Tightening of Nut+Change in External Load
P_b = P_i+ΔP_i
This formula uses 3 Variables

Variables Used

Resultant Load on Bolt - (Measured in Newton) - Resultant Load on Bolt is the total resultant force/load acting on the bolt after tightening the bolt.
Initial Preload in Bolt Due to Tightening of Nut - (Measured in Newton) - Initial Preload in Bolt Due to Tightening of Nut is defined as the difference between the resultant load on the bolt and change in external load.
Change in External Load - (Measured in Newton) - Change in External Load is the amount of variation in the externally applied force or load.

STEP 1: Convert Input(s) to Base Unit

Initial Preload in Bolt Due to Tightening of Nut: 850 Newton --> 850 Newton No Conversion Required
Change in External Load: 5905 Newton --> 5905 Newton No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_b = P_i+ΔP_i --> 850+5905

Evaluating ... ...

P_b = 6755

STEP 3: Convert Result to Output's Unit

6755 Newton --> No Conversion Required

FINAL ANSWER

6755 Newton <-- Resultant Load on Bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Threaded Fastener » Mechanical » Structural Response and Force Analysis » Resultant Load on Bolt

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< Structural Response and Force Analysis Calculators

Tensile Stress Area of Threaded fastener

LaTeX Go Tensile Stress Area of Threaded Fastener = pi/4*((Pitch Diameter of External Thread+Minor Diameter of External Thread)/2)^2

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

LaTeX Go Tensile Stress in Bolt = Tensile Force on Bolt/(pi/4*Core Diameter of Threaded Bolt^2)

Tensile Force acting on Bolt given Tensile Stress

LaTeX Go Tensile Force on Bolt = Tensile Stress in Bolt*pi*(Core Diameter of Threaded Bolt^2)/4

Tensile Yield Strength of Bolt

LaTeX Go Tensile Yield Strength of Bolt = Factor of Safety For Bolt*Tensile Stress in Bolt

Resultant Load on Bolt Formula

LaTeX Go

Resultant Load on Bolt = Initial Preload in Bolt Due to Tightening of Nut+Change in External Load
P_b = P_i+ΔP_i

What is a fastener?

A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

How to Calculate Resultant Load on Bolt?

Resultant Load on Bolt calculator uses Resultant Load on Bolt = Initial Preload in Bolt Due to Tightening of Nut+Change in External Load to calculate the Resultant Load on Bolt, Resultant Load on Bolt is the total force acting on the bolt, which includes the combined effects of axial loads, shear forces, and any other relevant forces. Resultant Load on Bolt is denoted by P_b symbol.

How to calculate Resultant Load on Bolt using this online calculator? To use this online calculator for Resultant Load on Bolt, enter Initial Preload in Bolt Due to Tightening of Nut (P_i) & Change in External Load (ΔP_i) and hit the calculate button. Here is how the Resultant Load on Bolt calculation can be explained with given input values -> 6755 = 850+5905.

FAQ

What is Resultant Load on Bolt?

Resultant Load on Bolt is the total force acting on the bolt, which includes the combined effects of axial loads, shear forces, and any other relevant forces and is represented as P_b = P_i+ΔP_i or Resultant Load on Bolt = Initial Preload in Bolt Due to Tightening of Nut+Change in External Load. Initial Preload in Bolt Due to Tightening of Nut is defined as the difference between the resultant load on the bolt and change in external load & Change in External Load is the amount of variation in the externally applied force or load.

How to calculate Resultant Load on Bolt?

Resultant Load on Bolt is the total force acting on the bolt, which includes the combined effects of axial loads, shear forces, and any other relevant forces is calculated using Resultant Load on Bolt = Initial Preload in Bolt Due to Tightening of Nut+Change in External Load. To calculate Resultant Load on Bolt, you need Initial Preload in Bolt Due to Tightening of Nut (P_i) & Change in External Load (ΔP_i). With our tool, you need to enter the respective value for Initial Preload in Bolt Due to Tightening of Nut & Change in External Load and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search