Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) Calculator

✖Volume of Conductor is the total volume of the material used to make the conductor of an overhead dc line.ⓘ Volume of Conductor [V]			+10% -10%
✖Line Losses is defined as the total losses occurring in an Overhead DC line when in use.ⓘ Line Losses [P_loss]			+10% -10%
✖Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire.ⓘ Maximum Voltage Overhead DC [V_m]			+10% -10%
✖Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end.ⓘ Power Transmitted [P]			+10% -10%
✖Length of Wire DC is the total length of the wire from one end to other end.ⓘ Length of Wire DC [L]			+10% -10%

✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2)
ρ = V*P_loss*(V_m^2)/((P*L)^2)
This formula uses 6 Variables

Variables Used

Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Volume of Conductor - (Measured in Cubic Meter) - Volume of Conductor is the total volume of the material used to make the conductor of an overhead dc line.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Overhead DC line when in use.
Maximum Voltage Overhead DC - (Measured in Volt) - Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Power Transmitted - (Measured in Watt) - Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end.
Length of Wire DC - (Measured in Meter) - Length of Wire DC is the total length of the wire from one end to other end.

STEP 1: Convert Input(s) to Base Unit

Volume of Conductor: 26 Cubic Meter --> 26 Cubic Meter No Conversion Required
Line Losses: 0.74 Watt --> 0.74 Watt No Conversion Required
Maximum Voltage Overhead DC: 60.26 Volt --> 60.26 Volt No Conversion Required
Power Transmitted: 920 Watt --> 920 Watt No Conversion Required
Length of Wire DC: 12.7 Meter --> 12.7 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = V*P_loss*(V_m^2)/((P*L)^2) --> 26*0.74*(60.26^2)/((920*12.7)^2)

Evaluating ... ...

ρ = 0.000511776365552731

STEP 3: Convert Result to Output's Unit

0.000511776365552731 Ohm Meter --> No Conversion Required

FINAL ANSWER

0.000511776365552731 ≈ 0.000512 Ohm Meter <-- Resistivity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Overhead DC Supply » 2 Wire System » Mid Point Earthed » Resistance and Resistivity » Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< Resistance and Resistivity Calculators

Resistivity using Line Losses(Two-Wire Mid-Point Earthed)

LaTeX Go Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC)

Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)

LaTeX Go Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2)

Resistance(Two-Wire Mid-Point Earthed)

LaTeX Go Resistance Overhead DC = Resistivity*Length of Wire DC/Area of Overhead DC Wire

Resistance using Line Losses(Two-Wire Mid-Point Earthed)

LaTeX Go Resistance Overhead DC = Line Losses/(2*(Current Overhead DC^2))

Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) Formula

LaTeX Go

Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2)
ρ = V*P_loss*(V_m^2)/((P*L)^2)

What is the volume of two-wire mid-point earthed system?

The volume of conductor material required in a two-wire mid-point earthed system is one-fourth of that required in a two-wire DC system with one conductor earthed.

How to Calculate Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)?

Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) calculator uses Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2) to calculate the Resistivity, The Resistivity using Volume of Conductor Material(2-Wire Mid-point Earthed OS) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors. Resistivity is denoted by ρ symbol.

How to calculate Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) using this online calculator? To use this online calculator for Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS), enter Volume of Conductor (V), Line Losses (P_loss), Maximum Voltage Overhead DC (V_m), Power Transmitted (P) & Length of Wire DC (L) and hit the calculate button. Here is how the Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS) calculation can be explained with given input values -> 0.000512 = 26*0.74*(60.26^2)/((920*12.7)^2).

FAQ

What is Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)?

The Resistivity using Volume of Conductor Material(2-Wire Mid-point Earthed OS) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors and is represented as ρ = V*P_loss*(V_m^2)/((P*L)^2) or Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2). Volume of Conductor is the total volume of the material used to make the conductor of an overhead dc line, Line Losses is defined as the total losses occurring in an Overhead DC line when in use, Maximum Voltage Overhead DC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Power Transmitted is defined as the product of current and voltage phasor in a overhead dc line at the receiving end & Length of Wire DC is the total length of the wire from one end to other end.

How to calculate Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS)?

The Resistivity using Volume of Conductor Material(2-Wire Mid-point Earthed OS) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors is calculated using Resistivity = Volume of Conductor*Line Losses*(Maximum Voltage Overhead DC^2)/((Power Transmitted*Length of Wire DC)^2). To calculate Resistivity using Volume of Conductor Material(2-Wire Mid-Point Earthed OS), you need Volume of Conductor (V), Line Losses (P_loss), Maximum Voltage Overhead DC (V_m), Power Transmitted (P) & Length of Wire DC (L). With our tool, you need to enter the respective value for Volume of Conductor, Line Losses, Maximum Voltage Overhead DC, Power Transmitted & Length of Wire DC and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Resistivity?

In this formula, Resistivity uses Volume of Conductor, Line Losses, Maximum Voltage Overhead DC, Power Transmitted & Length of Wire DC. We can use 1 other way(s) to calculate the same, which is/are as follows -

Resistivity = (Maximum Voltage Overhead DC^2)*Line Losses*2*Area of Overhead DC Wire/((Power Transmitted^2)*Length of Wire DC)

Home

FREE PDFs

🔍 Search