Resistivity using Constant (1-Phase 2-Wire US) Calculator

✖Constant Underground AC is defined as the constant of line of a Overhead supply system.ⓘ Constant Underground AC [K]			+10% -10%
✖Line Losses is defined as the total losses occurring in an Underground AC line when in use.ⓘ Line Losses [P_loss]			+10% -10%
✖Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.ⓘ Maximum Voltage Underground AC [V_m]			+10% -10%
✖Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.ⓘ Power Transmitted [P]			+10% -10%
✖Length of Underground AC Wire is the total length of the wire from one end to other end.ⓘ Length of Underground AC Wire [L]			+10% -10%

✖Resistivity is the measure of how strongly a material opposes the flow of current through them.ⓘ Resistivity using Constant (1-Phase 2-Wire US) [ρ]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Power System Formula PDF PDF Image

Resistivity using Constant (1-Phase 2-Wire US) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Resistivity = (Constant Underground AC*Line Losses*(Maximum Voltage Underground AC^2)/(4*(Power Transmitted*Length of Underground AC Wire)^2))
ρ = (K*P_loss*(V_m^2)/(4*(P*L)^2))
This formula uses 6 Variables

Variables Used

Resistivity - (Measured in Ohm Meter) - Resistivity is the measure of how strongly a material opposes the flow of current through them.
Constant Underground AC - Constant Underground AC is defined as the constant of line of a Overhead supply system.
Line Losses - (Measured in Watt) - Line Losses is defined as the total losses occurring in an Underground AC line when in use.
Maximum Voltage Underground AC - (Measured in Volt) - Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire.
Power Transmitted - (Measured in Watt) - Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work.
Length of Underground AC Wire - (Measured in Meter) - Length of Underground AC Wire is the total length of the wire from one end to other end.

STEP 1: Convert Input(s) to Base Unit

Constant Underground AC: 0.87 --> No Conversion Required
Line Losses: 2.67 Watt --> 2.67 Watt No Conversion Required
Maximum Voltage Underground AC: 230 Volt --> 230 Volt No Conversion Required
Power Transmitted: 300 Watt --> 300 Watt No Conversion Required
Length of Underground AC Wire: 24 Meter --> 24 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ = (K*P_loss*(V_m^2)/(4*(P*L)^2)) --> (0.87*2.67*(230^2)/(4*(300*24)^2))

Evaluating ... ...

ρ = 0.000592599392361111

STEP 3: Convert Result to Output's Unit

0.000592599392361111 Ohm Meter --> No Conversion Required

FINAL ANSWER

0.000592599392361111 ≈ 0.000593 Ohm Meter <-- Resistivity

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electrical » Power System » Underground AC Supply » 1 Φ 2 Wire System » Resistance and Resistivity » Resistivity using Constant (1-Phase 2-Wire US)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has verified this Calculator and 1900+ more calculators!

< Resistance and Resistivity Calculators

Resistivity using Area of X-Section (1-Phase 2-Wire US)

LaTeX Go Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2))

Resistivity using Volume of Conductor Material (1-Phase 2-Wire US)

LaTeX Go Resistivity = Volume Of Conductor*Line Losses*(Maximum Voltage Underground AC*(cos(Phase Difference)))^2/(8*(Power Transmitted*Length of Underground AC Wire)^2)

Resistance (1-Phase 2-Wire US)

LaTeX Go Resistance Underground AC = Resistivity*Length of Underground AC Wire/Area of Underground AC Wire

Resistance using Volume of Conductor Material (1-Phase 2-Wire US)

LaTeX Go Resistance Underground AC = Volume Of Conductor*Resistivity/(2*(Area of Underground AC Wire^2))

Resistivity using Constant (1-Phase 2-Wire US) Formula

LaTeX Go

Resistivity = (Constant Underground AC*Line Losses*(Maximum Voltage Underground AC^2)/(4*(Power Transmitted*Length of Underground AC Wire)^2))
ρ = (K*P_loss*(V_m^2)/(4*(P*L)^2))

What is the value of maximum voltage and volume of conductor material in 1-phase 2-wire system?

The volume of conductor material required in this system is 2/cos²θ times that of 2-wire d.c.system with the one conductor earthed. The maximum voltage between conductors is v_m so that r.m.s. value of voltage between them is v_m/√2.

How to Calculate Resistivity using Constant (1-Phase 2-Wire US)?

Resistivity using Constant (1-Phase 2-Wire US) calculator uses Resistivity = (Constant Underground AC*Line Losses*(Maximum Voltage Underground AC^2)/(4*(Power Transmitted*Length of Underground AC Wire)^2)) to calculate the Resistivity, The Resistivity using Constant (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors. Resistivity is denoted by ρ symbol.

How to calculate Resistivity using Constant (1-Phase 2-Wire US) using this online calculator? To use this online calculator for Resistivity using Constant (1-Phase 2-Wire US), enter Constant Underground AC (K), Line Losses (P_loss), Maximum Voltage Underground AC (V_m), Power Transmitted (P) & Length of Underground AC Wire (L) and hit the calculate button. Here is how the Resistivity using Constant (1-Phase 2-Wire US) calculation can be explained with given input values -> 0.000593 = (0.87*2.67*(230^2)/(4*(300*24)^2)).

FAQ

What is Resistivity using Constant (1-Phase 2-Wire US)?

The Resistivity using Constant (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors and is represented as ρ = (K*P_loss*(V_m^2)/(4*(P*L)^2)) or Resistivity = (Constant Underground AC*Line Losses*(Maximum Voltage Underground AC^2)/(4*(Power Transmitted*Length of Underground AC Wire)^2)). Constant Underground AC is defined as the constant of line of a Overhead supply system, Line Losses is defined as the total losses occurring in an Underground AC line when in use, Maximum Voltage Underground AC is defined as the peak amplitude of the AC voltage supplied to the line or wire, Power Transmitted is the amount of power that is transferred from its place of generation to a location where it is applied to perform useful work & Length of Underground AC Wire is the total length of the wire from one end to other end.

How to calculate Resistivity using Constant (1-Phase 2-Wire US)?

The Resistivity using Constant (1-Phase 2-Wire US) formula is defined as a characteristic property of each material, resistivity is useful in comparing various materials on the basis of their ability to conduct electric currents. High resistivity designates poor conductors is calculated using Resistivity = (Constant Underground AC*Line Losses*(Maximum Voltage Underground AC^2)/(4*(Power Transmitted*Length of Underground AC Wire)^2)). To calculate Resistivity using Constant (1-Phase 2-Wire US), you need Constant Underground AC (K), Line Losses (P_loss), Maximum Voltage Underground AC (V_m), Power Transmitted (P) & Length of Underground AC Wire (L). With our tool, you need to enter the respective value for Constant Underground AC, Line Losses, Maximum Voltage Underground AC, Power Transmitted & Length of Underground AC Wire and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Resistivity?

In this formula, Resistivity uses Constant Underground AC, Line Losses, Maximum Voltage Underground AC, Power Transmitted & Length of Underground AC Wire. We can use 3 other way(s) to calculate the same, which is/are as follows -

Resistivity = Area of Underground AC Wire*(Maximum Voltage Underground AC^2)*Line Losses*((cos(Phase Difference))^2)/((4)*Length of Underground AC Wire*(Power Transmitted^2))
Resistivity = Volume Of Conductor*Line Losses*(Maximum Voltage Underground AC*(cos(Phase Difference)))^2/(8*(Power Transmitted*Length of Underground AC Wire)^2)
Resistivity = Line Losses*Area of Underground AC Wire/(2*(Current Underground AC)^2*Length of Underground AC Wire)

Home

FREE PDFs

🔍 Search