Resistance of Emitter in Common-Base Amplifier Solution

STEP 0: Pre-Calculation Summary
Formula Used
Emitter Resistance = Input Voltage/Emitter Current
Re = Vin/ie
This formula uses 3 Variables
Variables Used
Emitter Resistance - (Measured in Ohm) - Emitter Resistance is a dynamic resistance of the emitter-base junction diode of a transistor.
Input Voltage - (Measured in Volt) - Input voltage is the voltage supplied to the device.
Emitter Current - (Measured in Ampere) - Emitter current is the amplified output current of a bipolar junction transistor.
STEP 1: Convert Input(s) to Base Unit
Input Voltage: 2.5 Volt --> 2.5 Volt No Conversion Required
Emitter Current: 37.31 Milliampere --> 0.03731 Ampere (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Re = Vin/ie --> 2.5/0.03731
Evaluating ... ...
Re = 67.0061645671402
STEP 3: Convert Result to Output's Unit
67.0061645671402 Ohm -->0.0670061645671402 Kilohm (Check conversion ​here)
FINAL ANSWER
0.0670061645671402 0.067006 Kilohm <-- Emitter Resistance
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Payal Priya
Birsa Institute of Technology (BIT), Sindri
Payal Priya has created this Calculator and 600+ more calculators!
Verifier Image
Verified by Urvi Rathod
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1900+ more calculators!

Common Base Amplifier Calculators

Negative Voltage Gain from Base to Collector
​ Go Negative Voltage Gain = -Common Base Current Gain*(Collector Resistance/Emitter Resistance)
Common Base Current Gain
​ Go Common Base Current Gain = (Voltage Gain*Emitter Resistance/Collector Resistance)
Emitter Current of Common-Base Amplifier
​ Go Emitter Current = Input Voltage/Emitter Resistance
Voltage Gain of Common-Base Amplifier
​ Go Voltage Gain = Collector Voltage/Emitter Voltage

CV Actions of Common Stage Amplifiers Calculators

Input Resistance of Common Emitter Amplifier
​ Go Input Resistance = (1/Base Resistance+1/Base Resistance 2+1/Small Signal Input Resistance)^-1
Input Impedance of Common-Base Amplifier
​ Go Input Impedance = (1/Emitter Resistance+1/Small Signal Input Resistance)^(-1)
Fundamental Voltage in Common-Emitter Amplifier
​ Go Fundamental Component Voltage = Input Resistance*Base Current
Emitter Current of Common-Base Amplifier
​ Go Emitter Current = Input Voltage/Emitter Resistance

Resistance of Emitter in Common-Base Amplifier Formula

Emitter Resistance = Input Voltage/Emitter Current
Re = Vin/ie

What is the advantage of a common base amplifier?

The common base circuit works best as a current buffer. It can take an input current at a low input impedance, and deliver nearly that same current to a higher impedance output.

How to Calculate Resistance of Emitter in Common-Base Amplifier?

Resistance of Emitter in Common-Base Amplifier calculator uses Emitter Resistance = Input Voltage/Emitter Current to calculate the Emitter Resistance, Resistance of Emitter in Common-Base Amplifier refers to the opposition to the flow of current in an electronic circuit. It is measured in ohms and can affect the performance of a circuit, particularly in terms of power output and efficiency. Emitter Resistance is denoted by Re symbol.

How to calculate Resistance of Emitter in Common-Base Amplifier using this online calculator? To use this online calculator for Resistance of Emitter in Common-Base Amplifier, enter Input Voltage (Vin) & Emitter Current (ie) and hit the calculate button. Here is how the Resistance of Emitter in Common-Base Amplifier calculation can be explained with given input values -> 6.7E-5 = 2.5/0.03731.

FAQ

What is Resistance of Emitter in Common-Base Amplifier?
Resistance of Emitter in Common-Base Amplifier refers to the opposition to the flow of current in an electronic circuit. It is measured in ohms and can affect the performance of a circuit, particularly in terms of power output and efficiency and is represented as Re = Vin/ie or Emitter Resistance = Input Voltage/Emitter Current. Input voltage is the voltage supplied to the device & Emitter current is the amplified output current of a bipolar junction transistor.
How to calculate Resistance of Emitter in Common-Base Amplifier?
Resistance of Emitter in Common-Base Amplifier refers to the opposition to the flow of current in an electronic circuit. It is measured in ohms and can affect the performance of a circuit, particularly in terms of power output and efficiency is calculated using Emitter Resistance = Input Voltage/Emitter Current. To calculate Resistance of Emitter in Common-Base Amplifier, you need Input Voltage (Vin) & Emitter Current (ie). With our tool, you need to enter the respective value for Input Voltage & Emitter Current and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!