Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants Calculator

✖Base resistance is the resistance of the base junction.ⓘ Base Resistance [R_b]			+10% -10%
✖Input resistance is the value of internal resistance of source.ⓘ Input Resistance [R_i]			+10% -10%
✖Signal Resistance is the resistance which is fed with the signal voltage source V_s to an Amplifier.ⓘ Signal Resistance [R_s]			+10% -10%

✖Total Resistance is the total opposition caused in the flow of current.ⓘ Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants [R_t]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Low Frequency Response Amplifiers Formulas PDF PDF Image

Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants Solution

STEP 0: Pre-Calculation Summary

Formula Used

Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance
R_t = (1/R_b+1/R_i)+R_s
This formula uses 4 Variables

Variables Used

Total Resistance - (Measured in Ohm) - Total Resistance is the total opposition caused in the flow of current.
Base Resistance - (Measured in Ohm) - Base resistance is the resistance of the base junction.
Input Resistance - (Measured in Ohm) - Input resistance is the value of internal resistance of source.
Signal Resistance - (Measured in Ohm) - Signal Resistance is the resistance which is fed with the signal voltage source V_s to an Amplifier.

STEP 1: Convert Input(s) to Base Unit

Base Resistance: 14 Kilohm --> 14000 Ohm (Check conversion here)
Input Resistance: 16 Kilohm --> 16000 Ohm (Check conversion here)
Signal Resistance: 4.7 Kilohm --> 4700 Ohm (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_t = (1/R_b+1/R_i)+R_s --> (1/14000+1/16000)+4700

Evaluating ... ...

R_t = 4700.00013392857

STEP 3: Convert Result to Output's Unit

4700.00013392857 Ohm -->4.70000013392857 Kilohm (Check conversion here)

FINAL ANSWER

4.70000013392857 ≈ 4.7 Kilohm <-- Total Resistance

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Electronics » Amplifiers » Low Frequency Response Amplifiers » Response of CE Amplifier » Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants

Credits

Created by Payal Priya

Birsa Institute of Technology (BIT), Sindri

Payal Priya has created this Calculator and 600+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Response of CE Amplifier Calculators

Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants

LaTeX Go Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance

Time Constant Associated with Cc1 using Method Short-Circuit Time Constants

LaTeX Go Time Constant = Capacitance of Coupling Capacitor 1*Resistance of Primary Winding in Secondary

Time Constant of CE Amplifier

LaTeX Go Time Constant = Capacitance of Coupling Capacitor 1*Resistance of Resistor 1

Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants Formula

LaTeX Go

Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance
R_t = (1/R_b+1/R_i)+R_s

What is short-circuit time constants?

The product RiS Ci is termed the short-circuit time constant associated with Ci. Transistor capacitances are relatively small in value and their large impedances at low frequencies and can be neglected. Thus coupling and bypass capacitors determine an amplifier's low-frequency response.

How to Calculate Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants?

Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants calculator uses Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance to calculate the Total Resistance, The Resistance due to capacitor Cc1 using method short-circuit time constants formula is defined as a measure of the opposition to current flow in an electrical circuit. Total Resistance is denoted by R_t symbol.

How to calculate Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants using this online calculator? To use this online calculator for Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants, enter Base Resistance (R_b), Input Resistance (R_i) & Signal Resistance (R_s) and hit the calculate button. Here is how the Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants calculation can be explained with given input values -> 0.0047 = (1/14000+1/16000)+4700.

FAQ

What is Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants?

The Resistance due to capacitor Cc1 using method short-circuit time constants formula is defined as a measure of the opposition to current flow in an electrical circuit and is represented as R_t = (1/R_b+1/R_i)+R_s or Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance. Base resistance is the resistance of the base junction, Input resistance is the value of internal resistance of source & Signal Resistance is the resistance which is fed with the signal voltage source V_s to an Amplifier.

How to calculate Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants?

The Resistance due to capacitor Cc1 using method short-circuit time constants formula is defined as a measure of the opposition to current flow in an electrical circuit is calculated using Total Resistance = (1/Base Resistance+1/Input Resistance)+Signal Resistance. To calculate Resistance due to Capacitor CC1 using Method Short-Circuit Time Constants, you need Base Resistance (R_b), Input Resistance (R_i) & Signal Resistance (R_s). With our tool, you need to enter the respective value for Base Resistance, Input Resistance & Signal Resistance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search