Relative Depth at New Zero Elevation Calculator

✖Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.ⓘ Height above Bed [h_o]			+10% -10%
✖Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).ⓘ Difference in the Elevation (FRL and Original bed) [H]			+10% -10%

✖Relative Depth measures the relative distance from the deep white matter surface to the superficial white matter surface.ⓘ Relative Depth at New Zero Elevation [p]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Prediction of Sediment Distribution Formulas PDF PDF Image

Relative Depth at New Zero Elevation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)
p = h_o/H
This formula uses 3 Variables

Variables Used

Relative Depth - (Measured in Meter) - Relative Depth measures the relative distance from the deep white matter surface to the superficial white matter surface.
Height above Bed - (Measured in Meter) - Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced.
Difference in the Elevation (FRL and Original bed) - (Measured in Meter) - Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).

STEP 1: Convert Input(s) to Base Unit

Height above Bed: 2 Meter --> 2 Meter No Conversion Required
Difference in the Elevation (FRL and Original bed): 11 Meter --> 11 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p = h_o/H --> 2/11

Evaluating ... ...

p = 0.181818181818182

STEP 3: Convert Result to Output's Unit

0.181818181818182 Meter --> No Conversion Required

FINAL ANSWER

0.181818181818182 ≈ 0.181818 Meter <-- Relative Depth

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Erosion and Reservoir Sedimentation » Prediction of Sediment Distribution » Empirical Area Reduction Method » Relative Depth at New Zero Elevation

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Empirical Area Reduction Method Calculators

Relative Area for Different Type Classification of Reservoir

LaTeX Go Dimensionless Relative Area = Coefficient c*(Relative Depth^Coefficient m1)*(1-Relative Depth)^Coefficient n1

New Total Depth of Reservoir

LaTeX Go New Total Depth of Reservoir = Difference in the Elevation (FRL and Original bed)-Height above Bed

Difference in Elevations of Full Reservoir Level and Original Bed of Reservoir

LaTeX Go Difference in the Elevation (FRL and Original bed) = Height above Bed/Relative Depth

Relative Depth at New Zero Elevation

LaTeX Go Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)

Relative Depth at New Zero Elevation Formula

LaTeX Go

Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed)
p = h_o/H

What is a Reservoir?

A Reservoir is an artificial lake where water is stored. Most reservoirs are formed by constructing dams across rivers. A reservoir can also be formed from a natural lake whose outlet has been dammed to control the water level. The dam controls the amount of water that flows out of the reservoir.

How to Calculate Relative Depth at New Zero Elevation?

Relative Depth at New Zero Elevation calculator uses Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed) to calculate the Relative Depth, The Relative Depth at New Zero Elevation formula is defined as the ratio of height above the reservoir bed up to which sediment fills forming the new datum to that of the difference in elevation of FRL. Relative Depth is denoted by p symbol.

How to calculate Relative Depth at New Zero Elevation using this online calculator? To use this online calculator for Relative Depth at New Zero Elevation, enter Height above Bed (h_o) & Difference in the Elevation (FRL and Original bed) (H) and hit the calculate button. Here is how the Relative Depth at New Zero Elevation calculation can be explained with given input values -> 0.181818 = 2/11.

FAQ

What is Relative Depth at New Zero Elevation?

The Relative Depth at New Zero Elevation formula is defined as the ratio of height above the reservoir bed up to which sediment fills forming the new datum to that of the difference in elevation of FRL and is represented as p = h_o/H or Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed). Height above Bed is the elevation from surface of zero elevation to which heights of various points are referenced & Difference in the Elevation (FRL and Original bed) of the reservoir is the depth of the reservoir at the Full Reservoir Level (FRL).

How to calculate Relative Depth at New Zero Elevation?

The Relative Depth at New Zero Elevation formula is defined as the ratio of height above the reservoir bed up to which sediment fills forming the new datum to that of the difference in elevation of FRL is calculated using Relative Depth = Height above Bed/Difference in the Elevation (FRL and Original bed). To calculate Relative Depth at New Zero Elevation, you need Height above Bed (h_o) & Difference in the Elevation (FRL and Original bed) (H). With our tool, you need to enter the respective value for Height above Bed & Difference in the Elevation (FRL and Original bed) and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search