Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves Calculator

✖Surf Similarity Number (Iribarren Number) is a dimensionless parameter used to model several effects of (breaking) surface gravity waves on beaches and coastal structures.ⓘ Surf Similarity Number (Iribarren Number) [I_r]

+10%

-10%

✖Reflection Coef. (Tetrapod-Armored Breakwaters) is a crucial parameter that quantifies the amount of wave energy reflected by tetrapod armored structures back towards the sea.ⓘ Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves [r_tab]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Harbor Hydrodynamics Formula PDF PDF Image

Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves Solution

STEP 0: Pre-Calculation Summary

Formula Used

Reflection Coef. (Tetrapod-Armored Breakwaters) = 0.48*Surf Similarity Number (Iribarren Number)^2/(9.6+Surf Similarity Number (Iribarren Number)^2)
r_tab = 0.48*I_r^2/(9.6+I_r^2)
This formula uses 2 Variables

Variables Used

Reflection Coef. (Tetrapod-Armored Breakwaters) - Reflection Coef. (Tetrapod-Armored Breakwaters) is a crucial parameter that quantifies the amount of wave energy reflected by tetrapod armored structures back towards the sea.
Surf Similarity Number (Iribarren Number) - Surf Similarity Number (Iribarren Number) is a dimensionless parameter used to model several effects of (breaking) surface gravity waves on beaches and coastal structures.

STEP 1: Convert Input(s) to Base Unit

Surf Similarity Number (Iribarren Number): 0.095 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r_tab = 0.48*I_r^2/(9.6+I_r^2) --> 0.48*0.095^2/(9.6+0.095^2)

Evaluating ... ...

r_tab = 0.000450826176433093

STEP 3: Convert Result to Output's Unit

0.000450826176433093 --> No Conversion Required

FINAL ANSWER

0.000450826176433093 ≈ 0.000451 <-- Reflection Coef. (Tetrapod-Armored Breakwaters)

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Coastal and Ocean Engineering » Surf Zone Hydrodynamics » Harbor Hydrodynamics » Reflection from Structures » Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has verified this Calculator and 900+ more calculators!

< Reflection from Structures Calculators

Reflection Coefficient in Coastal Structures

LaTeX Go Reflection Coefficient = (Coefficient 'a'*Surf Similarity Number (Iribarren Number)^2)/Coefficient 'b'+Surf Similarity Number (Iribarren Number)^2

Reflection Coefficient in Coastal Structures with Plane Slope-Monochromatic Waves

LaTeX Go Reflection Coef. (Plane Slope-Monochromatic Waves) = Surf Similarity Number (Iribarren Number)^2/(5.5+Surf Similarity Number (Iribarren Number)^2)

Reflection Coefficient in Coastal Structures with Plane Slope-Irregular Waves

LaTeX Go Reflection Coef. (Plane Slope-Irregular Waves) = 1.1*Surf Similarity Number (Iribarren Number)^2/(5.7+Surf Similarity Number (Iribarren Number)^2)

Reflection Coefficient in Coastal Structures with Rubble-Mound Breakwaters

LaTeX Go Reflection Coef. (Rubble-Mound Breakwater) = 0.6*Surf Similarity Number (Iribarren Number)^2/(6.6+Surf Similarity Number (Iribarren Number)^2)

Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves Formula

LaTeX Go

Reflection Coef. (Tetrapod-Armored Breakwaters) = 0.48*Surf Similarity Number (Iribarren Number)^2/(9.6+Surf Similarity Number (Iribarren Number)^2)
r_tab = 0.48*I_r^2/(9.6+I_r^2)

What is Wave Reflection on Structures?

If there is a change in water depth as a wave propagates forward, a portion of the wave’s energy will be reflected. When a wave hits a vertical, impermeable, rigid surface-piercing wall, essentially all of the wave energy will reflect from the wall. On the other hand, when a wave propagates over a small bottom slope, only a very small portion of the energy will be reflected. The degree of wave reflection is defined by the reflection coefficient Cr = Hr/Hi where Hr and Hi are the reflected and incident wave heights, respectively.

How to Calculate Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves?

Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves calculator uses Reflection Coef. (Tetrapod-Armored Breakwaters) = 0.48*Surf Similarity Number (Iribarren Number)^2/(9.6+Surf Similarity Number (Iribarren Number)^2) to calculate the Reflection Coef. (Tetrapod-Armored Breakwaters), The Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves formula is defined as a crucial parameter that quantifies the amount of wave energy reflected by these structures back towards the sea. Tetrapod-armored breakwaters are designed to reduce wave energy and protect shorelines from erosion by dissipating and absorbing wave energy. Reflection Coef. (Tetrapod-Armored Breakwaters) is denoted by r_tab symbol.

How to calculate Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves using this online calculator? To use this online calculator for Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves, enter Surf Similarity Number (Iribarren Number) (I_r) and hit the calculate button. Here is how the Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves calculation can be explained with given input values -> 0.000451 = 0.48*0.095^2/(9.6+0.095^2).

FAQ

What is Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves?

The Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves formula is defined as a crucial parameter that quantifies the amount of wave energy reflected by these structures back towards the sea. Tetrapod-armored breakwaters are designed to reduce wave energy and protect shorelines from erosion by dissipating and absorbing wave energy and is represented as r_tab = 0.48*I_r^2/(9.6+I_r^2) or Reflection Coef. (Tetrapod-Armored Breakwaters) = 0.48*Surf Similarity Number (Iribarren Number)^2/(9.6+Surf Similarity Number (Iribarren Number)^2). Surf Similarity Number (Iribarren Number) is a dimensionless parameter used to model several effects of (breaking) surface gravity waves on beaches and coastal structures.

How to calculate Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves?

The Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves formula is defined as a crucial parameter that quantifies the amount of wave energy reflected by these structures back towards the sea. Tetrapod-armored breakwaters are designed to reduce wave energy and protect shorelines from erosion by dissipating and absorbing wave energy is calculated using Reflection Coef. (Tetrapod-Armored Breakwaters) = 0.48*Surf Similarity Number (Iribarren Number)^2/(9.6+Surf Similarity Number (Iribarren Number)^2). To calculate Reflection Coefficient in Coastal Structures with Tetrapod-Armored Breakwaters - Irregular Waves, you need Surf Similarity Number (Iribarren Number) (I_r). With our tool, you need to enter the respective value for Surf Similarity Number (Iribarren Number) and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search