Reflected Voltage using Incident and Transmitted Voltage Calculator

✖Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.ⓘ Transmitted Voltage [V_t]			+10% -10%
✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage [V_i]			+10% -10%

✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage using Incident and Transmitted Voltage [E_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Reflected Voltage using Incident and Transmitted Voltage Solution

STEP 0: Pre-Calculation Summary

Formula Used

Reflected Voltage = Transmitted Voltage-Incident Voltage
E_r = V_t-V_i
This formula uses 3 Variables

Variables Used

Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.
Transmitted Voltage - (Measured in Volt) - Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line.
Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.

STEP 1: Convert Input(s) to Base Unit

Transmitted Voltage: 20 Volt --> 20 Volt No Conversion Required
Incident Voltage: 6 Volt --> 6 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E_r = V_t-V_i --> 20-6

Evaluating ... ...

E_r = 14

STEP 3: Convert Result to Output's Unit

14 Volt --> No Conversion Required

FINAL ANSWER

14 Volt <-- Reflected Voltage

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Reflected Voltage using Incident and Transmitted Voltage

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Reflected Voltage using Incident and Transmitted Voltage Formula

LaTeX Go

Reflected Voltage = Transmitted Voltage-Incident Voltage
E_r = V_t-V_i

Define the characteristic impedance.

The Characteristic Impedance is defined as a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line.

How to Calculate Reflected Voltage using Incident and Transmitted Voltage?

Reflected Voltage using Incident and Transmitted Voltage calculator uses Reflected Voltage = Transmitted Voltage-Incident Voltage to calculate the Reflected Voltage, The Reflected Voltage using Incident and Transmitted Voltage formula is defined as the Voltage wave that is traveling from the receiving end to the sending end of the Transmission line. Reflected Voltage is denoted by E_r symbol.

How to calculate Reflected Voltage using Incident and Transmitted Voltage using this online calculator? To use this online calculator for Reflected Voltage using Incident and Transmitted Voltage, enter Transmitted Voltage (V_t) & Incident Voltage (V_i) and hit the calculate button. Here is how the Reflected Voltage using Incident and Transmitted Voltage calculation can be explained with given input values -> 14 = 20-6.

FAQ

What is Reflected Voltage using Incident and Transmitted Voltage?

The Reflected Voltage using Incident and Transmitted Voltage formula is defined as the Voltage wave that is traveling from the receiving end to the sending end of the Transmission line and is represented as E_r = V_t-V_i or Reflected Voltage = Transmitted Voltage-Incident Voltage. Transmitted Voltage is defined as the Voltage wave that is traveling through the Load of the Transmission line & The Incident Voltage on the transmission line is equal to half the generator voltage.

How to calculate Reflected Voltage using Incident and Transmitted Voltage?

The Reflected Voltage using Incident and Transmitted Voltage formula is defined as the Voltage wave that is traveling from the receiving end to the sending end of the Transmission line is calculated using Reflected Voltage = Transmitted Voltage-Incident Voltage. To calculate Reflected Voltage using Incident and Transmitted Voltage, you need Transmitted Voltage (V_t) & Incident Voltage (V_i). With our tool, you need to enter the respective value for Transmitted Voltage & Incident Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Reflected Voltage?

In this formula, Reflected Voltage uses Transmitted Voltage & Incident Voltage. We can use 3 other way(s) to calculate the same, which is/are as follows -

Reflected Voltage = Reflection Coefficient of Voltage*Incident Voltage
Reflected Voltage = (-1)*Reflected Current*Characteristic Impedance
Reflected Voltage = Incident Voltage*(Load Impedance-Characteristic Impedance)/(Load Impedance+Characteristic Impedance)

Home

FREE PDFs

🔍 Search