Reflected Voltage (Load SC) Calculator

✖The Incident Voltage on the transmission line is equal to half the generator voltage.ⓘ Incident Voltage [V_i]

+10%

-10%

✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage (Load SC) [E_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Reflected Voltage (Load SC) Solution

STEP 0: Pre-Calculation Summary

Formula Used

Reflected Voltage = (-1)*Incident Voltage
E_r = (-1)*V_i
This formula uses 2 Variables

Variables Used

Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.
Incident Voltage - (Measured in Volt) - The Incident Voltage on the transmission line is equal to half the generator voltage.

STEP 1: Convert Input(s) to Base Unit

Incident Voltage: 6 Volt --> 6 Volt No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

E_r = (-1)*V_i --> (-1)*6

Evaluating ... ...

E_r = -6

STEP 3: Convert Result to Output's Unit

-6 Volt --> No Conversion Required

FINAL ANSWER

-6 Volt <-- Reflected Voltage

(Calculation completed in 00.018 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Reflected Voltage (Load SC)

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Team Softusvista

Softusvista Office (Pune), India

Team Softusvista has verified this Calculator and 1100+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Reflected Voltage (Load SC) Formula

LaTeX Go

Reflected Voltage = (-1)*Incident Voltage
E_r = (-1)*V_i

Explain Short-Circuited Load for Travelling Waves.

The unique characteristic of the short circuit is that the voltage across it is zero. When an incident voltage wave E arrives at a short circuit, the reflected voltage wave must be – E to satisfy the condition that the voltage across the short circuit is zero.

How to Calculate Reflected Voltage (Load SC)?

Reflected Voltage (Load SC) calculator uses Reflected Voltage = (-1)*Incident Voltage to calculate the Reflected Voltage, The Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the receiving end to the sending end of the Transmission line. Reflected Voltage is denoted by E_r symbol.

How to calculate Reflected Voltage (Load SC) using this online calculator? To use this online calculator for Reflected Voltage (Load SC), enter Incident Voltage (V_i) and hit the calculate button. Here is how the Reflected Voltage (Load SC) calculation can be explained with given input values -> -6 = (-1)*6.

FAQ

What is Reflected Voltage (Load SC)?

The Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the receiving end to the sending end of the Transmission line and is represented as E_r = (-1)*V_i or Reflected Voltage = (-1)*Incident Voltage. The Incident Voltage on the transmission line is equal to half the generator voltage.

How to calculate Reflected Voltage (Load SC)?

The Reflected Voltage (Load SC) formula is defined as the voltage wave that is traveling from the receiving end to the sending end of the Transmission line is calculated using Reflected Voltage = (-1)*Incident Voltage. To calculate Reflected Voltage (Load SC), you need Incident Voltage (V_i). With our tool, you need to enter the respective value for Incident Voltage and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Reflected Voltage?

In this formula, Reflected Voltage uses Incident Voltage. We can use 3 other way(s) to calculate the same, which is/are as follows -

Reflected Voltage = Reflection Coefficient of Voltage*Incident Voltage
Reflected Voltage = (-1)*Reflected Current*Characteristic Impedance
Reflected Voltage = Transmitted Voltage-Incident Voltage

Home

FREE PDFs

🔍 Search