Reflected Current for Refracted Wave Calculator

✖Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.ⓘ Reflected Voltage [E_r]			+10% -10%
✖The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.ⓘ Characteristic Impedance [Z₀]			+10% -10%

✖Reflected Current is defined as the current wave that is traveling from the receiving end to the sending end of the Transmission line during transient condition.ⓘ Reflected Current for Refracted Wave [I_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Transmission Lines Formula PDF PDF Image

Reflected Current for Refracted Wave Solution

STEP 0: Pre-Calculation Summary

Formula Used

Reflected Current = (-1)*Reflected Voltage/Characteristic Impedance
I_r = (-1)*E_r/Z₀
This formula uses 3 Variables

Variables Used

Reflected Current - (Measured in Ampere) - Reflected Current is defined as the current wave that is traveling from the receiving end to the sending end of the Transmission line during transient condition.
Reflected Voltage - (Measured in Volt) - Reflected Voltage is the voltage that is reflected in the transmission line during transient condition.
Characteristic Impedance - (Measured in Ohm) - The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

STEP 1: Convert Input(s) to Base Unit

Reflected Voltage: 4.5 Volt --> 4.5 Volt No Conversion Required
Characteristic Impedance: 55.5 Ohm --> 55.5 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_r = (-1)*E_r/Z₀ --> (-1)*4.5/55.5

Evaluating ... ...

I_r = -0.0810810810810811

STEP 3: Convert Result to Output's Unit

-0.0810810810810811 Ampere --> No Conversion Required

FINAL ANSWER

-0.0810810810810811 ≈ -0.081081 Ampere <-- Reflected Current

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Transient » Reflected Current for Refracted Wave

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< Transient Calculators

Load Impedance using Reflected Coefficient of Current

LaTeX Go Load Impedance = Characteristic Impedance*(1-Reflection Coefficient of Current)/(Reflection Coefficient of Current-1)

Load Impedance using Reflected Coefficient of Voltage

LaTeX Go Load Impedance = Characteristic Impedance*(Reflection Coefficient of Voltage+1)/(1-Reflection Coefficient of Voltage)

Characteristic Impedance (Line SC)

LaTeX Go Characteristic Impedance = Incident Voltage/Incident Current

Incident Voltage using Transmitted Voltage (Load OC)

LaTeX Go Incident Voltage = Transmitted Voltage/2

Reflected Current for Refracted Wave Formula

LaTeX Go

Reflected Current = (-1)*Reflected Voltage/Characteristic Impedance
I_r = (-1)*E_r/Z₀

Define characteristic impedance.

The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line.

How to Calculate Reflected Current for Refracted Wave?

Reflected Current for Refracted Wave calculator uses Reflected Current = (-1)*Reflected Voltage/Characteristic Impedance to calculate the Reflected Current, The Reflected Current for Refracted Wave formula is defined as the current wave that is traveling from the receiving end to the sending end of the Transmission line. Reflected Current is denoted by I_r symbol.

How to calculate Reflected Current for Refracted Wave using this online calculator? To use this online calculator for Reflected Current for Refracted Wave, enter Reflected Voltage (E_r) & Characteristic Impedance (Z₀) and hit the calculate button. Here is how the Reflected Current for Refracted Wave calculation can be explained with given input values -> -0.081081 = (-1)*4.5/55.5.

FAQ

What is Reflected Current for Refracted Wave?

The Reflected Current for Refracted Wave formula is defined as the current wave that is traveling from the receiving end to the sending end of the Transmission line and is represented as I_r = (-1)*E_r/Z₀ or Reflected Current = (-1)*Reflected Voltage/Characteristic Impedance. Reflected Voltage is the voltage that is reflected in the transmission line during transient condition & The characteristic impedance of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line during transient condition.

How to calculate Reflected Current for Refracted Wave?

The Reflected Current for Refracted Wave formula is defined as the current wave that is traveling from the receiving end to the sending end of the Transmission line is calculated using Reflected Current = (-1)*Reflected Voltage/Characteristic Impedance. To calculate Reflected Current for Refracted Wave, you need Reflected Voltage (E_r) & Characteristic Impedance (Z₀). With our tool, you need to enter the respective value for Reflected Voltage & Characteristic Impedance and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Reflected Current?

In this formula, Reflected Current uses Reflected Voltage & Characteristic Impedance. We can use 1 other way(s) to calculate the same, which is/are as follows -

Reflected Current = Reflection Coefficient of Current*Incident Current

Home

FREE PDFs

🔍 Search