Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition Calculator

✖The Cut Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).ⓘ Cut Velocity [V_cut]			+10% -10%
✖Reference Tool Life in Cutting Velocity is the tool life of the tool obtained in the reference to machining condition.ⓘ Reference Tool Life in Cutting Velocity [T_rf]			+10% -10%
✖Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.ⓘ Tool Life in Cutting Velocity [T_v]			+10% -10%
✖Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.ⓘ Taylors Tool Life Exponent in Cutting Velocity [x]			+10% -10%

✖Reference Cutting Velocity in Cutting Velocity is the cutting velocity of the tool used in the reference to machining condition.ⓘ Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition [V_rf]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition Solution

STEP 0: Pre-Calculation Summary

Formula Used

Reference Cutting Velocity in Cutting Velocity = Cut Velocity/((Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity)
V_rf = V_cut/((T_rf/T_v)^x)
This formula uses 5 Variables

Variables Used

Reference Cutting Velocity in Cutting Velocity - (Measured in Meter per Second) - Reference Cutting Velocity in Cutting Velocity is the cutting velocity of the tool used in the reference to machining condition.
Cut Velocity - (Measured in Meter per Second) - The Cut Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating).
Reference Tool Life in Cutting Velocity - (Measured in Second) - Reference Tool Life in Cutting Velocity is the tool life of the tool obtained in the reference to machining condition.
Tool Life in Cutting Velocity - (Measured in Second) - Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations.
Taylors Tool Life Exponent in Cutting Velocity - Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.

STEP 1: Convert Input(s) to Base Unit

Cut Velocity: 0.831666667 Meter per Second --> 0.831666667 Meter per Second No Conversion Required
Reference Tool Life in Cutting Velocity: 295896.06 Second --> 295896.06 Second No Conversion Required
Tool Life in Cutting Velocity: 4499.4 Second --> 4499.4 Second No Conversion Required
Taylors Tool Life Exponent in Cutting Velocity: 0.846624 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_rf = V_cut/((T_rf/T_v)^x) --> 0.831666667/((295896.06/4499.4)^0.846624)

Evaluating ... ...

V_rf = 0.0240325536076105

STEP 3: Convert Result to Output's Unit

0.0240325536076105 Meter per Second --> No Conversion Required

FINAL ANSWER

0.0240325536076105 ≈ 0.024033 Meter per Second <-- Reference Cutting Velocity in Cutting Velocity

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Tool Life and Tool Wear » Cutting Velocity » Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition

Credits

Created by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has created this Calculator and 400+ more calculators!

Verified by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has verified this Calculator and 400+ more calculators!

< Cutting Velocity Calculators

Cutting Velocity using Taylor's Tool Life and Intercept

LaTeX Go Taylor Cutting Velocity = Taylors Intercept or Taylor's Constant/(Tool Life in Cutting Velocity^Taylors Tool Life Exponent in Cutting Velocity)

Resultant Cutting Velocity

LaTeX Go Resultant Cutting Velocity = Cutting Velocity/cos((Cutting Speed Angle))

Feed for Sintered-Carbide Tools using Crater Depth

LaTeX Go Feed Rate in Cutting Velocity = (Tool Wear Crater Depth-0.06)/0.3

Crater Depth for Sintered-Carbide Tools

LaTeX Go Tool Wear Crater Depth = 0.06+0.3*Feed Rate in Cutting Velocity

Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition Formula

LaTeX Go

What is reference Machining Condition?

Reference Machining Condition is usually a state of Machining Operation which has been idealized as the most suitable. It is used to draw a comparison between different other Machining Conditions.

How to Calculate Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition?

Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition calculator uses Reference Cutting Velocity in Cutting Velocity = Cut Velocity/((Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity) to calculate the Reference Cutting Velocity in Cutting Velocity, The Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition is a method to determine the Cutting Velocity required for a known reference Tool Life in the reference machining condition when compared to the current Condition. Reference Cutting Velocity in Cutting Velocity is denoted by V_rf symbol.

How to calculate Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition using this online calculator? To use this online calculator for Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition, enter Cut Velocity (V_cut), Reference Tool Life in Cutting Velocity (T_rf), Tool Life in Cutting Velocity (T_v) & Taylors Tool Life Exponent in Cutting Velocity (x) and hit the calculate button. Here is how the Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition calculation can be explained with given input values -> 0.024033 = 0.831666667/((295896.06/4499.4)^0.846624).

FAQ

What is Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition?

The Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition is a method to determine the Cutting Velocity required for a known reference Tool Life in the reference machining condition when compared to the current Condition and is represented as V_rf = V_cut/((T_rf/T_v)^x) or Reference Cutting Velocity in Cutting Velocity = Cut Velocity/((Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity). The Cut Velocity is the tangential velocity at the periphery of the cutter or workpiece (whichever is rotating), Reference Tool Life in Cutting Velocity is the tool life of the tool obtained in the reference to machining condition, Tool Life in Cutting Velocity is the period of time for which the cutting edge, affected by the cutting procedure, retains its cutting capacity between sharpening operations & Taylors Tool Life Exponent in Cutting Velocity is an experimental exponent that helps in quantifying the rate of tool wear.

How to calculate Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition?

The Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition is a method to determine the Cutting Velocity required for a known reference Tool Life in the reference machining condition when compared to the current Condition is calculated using Reference Cutting Velocity in Cutting Velocity = Cut Velocity/((Reference Tool Life in Cutting Velocity/Tool Life in Cutting Velocity)^Taylors Tool Life Exponent in Cutting Velocity). To calculate Reference Cutting Velocity given Tool Lives, Cutting Velocity under Machining Condition, you need Cut Velocity (V_cut), Reference Tool Life in Cutting Velocity (T_rf), Tool Life in Cutting Velocity (T_v) & Taylors Tool Life Exponent in Cutting Velocity (x). With our tool, you need to enter the respective value for Cut Velocity, Reference Tool Life in Cutting Velocity, Tool Life in Cutting Velocity & Taylors Tool Life Exponent in Cutting Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search