LCM of three numbers

Refractive Index of Material Given Optical Power Calculator

Engineering Chemistry Financial Health More >>

↳

Electronics Chemical Engineering Civil Electrical More >>

⤿

Fiber Optic Transmission Amplifiers Analog Communications Analog Electronics More >>

⤿

Fiber Optic Parameters C V Actions of Optics Transmission Optical Detectors Transmission Measurements

✖Ordinary Refractive Index represents the refractive index of the material under normal conditions, i.e., when there is no (or negligible) optical intensity.ⓘ Ordinary Refractive Index [n₀]			+10% -10%
✖Non Linear Index Coefficient quantifies the Kerr nonlinearity of a medium.ⓘ Non Linear Index Coefficient [n₂]			+10% -10%
✖Incident Optical Power is a measure of the rate at which light carries energy. It represents the amount of optical energy transmitted per unit of time.ⓘ Incident Optical Power [P_i]			+10% -10%
✖Effective Area is a measure of the cross-sectional area of an optical fiber through which light effectively propagates.ⓘ Effective Area [A_eff]			+10% -10%

✖The Refractive Index of Core is defined as how the light travels through that medium. It defines how much a light ray can bend when it enters from one medium to the other.ⓘ Refractive Index of Material Given Optical Power [η_core]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Electronics Formula PDF PDF Image

Refractive Index of Material Given Optical Power Solution

STEP 0: Pre-Calculation Summary

Formula Used

Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area)
η_core = n₀+n₂*(P_i/A_eff)
This formula uses 5 Variables

Variables Used

Refractive Index of Core - The Refractive Index of Core is defined as how the light travels through that medium. It defines how much a light ray can bend when it enters from one medium to the other.
Ordinary Refractive Index - Ordinary Refractive Index represents the refractive index of the material under normal conditions, i.e., when there is no (or negligible) optical intensity.
Non Linear Index Coefficient - Non Linear Index Coefficient quantifies the Kerr nonlinearity of a medium.
Incident Optical Power - (Measured in Watt) - Incident Optical Power is a measure of the rate at which light carries energy. It represents the amount of optical energy transmitted per unit of time.
Effective Area - (Measured in Square Meter) - Effective Area is a measure of the cross-sectional area of an optical fiber through which light effectively propagates.

STEP 1: Convert Input(s) to Base Unit

Ordinary Refractive Index: 1.203 --> No Conversion Required
Non Linear Index Coefficient: 1.1 --> No Conversion Required
Incident Optical Power: 6 Watt --> 6 Watt No Conversion Required
Effective Area: 50 Square Meter --> 50 Square Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

η_core = n₀+n₂*(P_i/A_eff) --> 1.203+1.1*(6/50)

Evaluating ... ...

η_core = 1.335

STEP 3: Convert Result to Output's Unit

1.335 --> No Conversion Required

FINAL ANSWER

1.335 <-- Refractive Index of Core

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electronics » Fiber Optic Transmission » Fiber Optic Parameters » Refractive Index of Material Given Optical Power

Credits

Created by Vaidehi Singh

Prabhat Engineering College (P.E.C.), Uttar Pradesh

Vaidehi Singh has created this Calculator and 25+ more calculators!

Verified by Priyanka Patel

Lalbhai Dalpatbhai College of engineering (LDCE), Ahmedabad

Priyanka Patel has verified this Calculator and 10+ more calculators!

< Fiber Optic Parameters Calculators

Refractive Index of Material Given Optical Power

LaTeX Go Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area)

Carrier to Noise Ratio

LaTeX Go Carrier to Noise Ratio = Carrier Power/(The Relative Intensity Noise (RIN) power+Shot Noise Power+Thermal Noise Power)

Total Dispersion

LaTeX Go Dispersion = sqrt(Fiber Rise Time^2+Pulse Spreading Time^2+Modal Dispersion Time^2)

Fiber Length Given Time Difference

LaTeX Go Fiber Length = ([c]*Time Difference)/(2*Refractive Index of Core)

Refractive Index of Material Given Optical Power Formula

LaTeX Go

Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area)
η_core = n₀+n₂*(P_i/A_eff)

What is the significance of Refractive Index?

The refractive index determines how much the path of light is bent, or refracted when entering a material. This is described by Snell’s law of refraction. The refractive index can be seen as the factor by which the speed and the wavelength of the radiation are reduced concerning their vacuum values. It tells how fast the light is moving in that medium. The refractive index may vary with wavelength. This causes white light to split into constituent colors when refracted. This is called dispersion and can be observed in prisms and rainbows and as chromatic aberration in lenses.

How to Calculate Refractive Index of Material Given Optical Power?

Refractive Index of Material Given Optical Power calculator uses Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area) to calculate the Refractive Index of Core, Refractive Index of Material Given Optical Power is the formula used to calculate the refractive index of material using the optical power and ordinary refractive index. The refractive index is a dimensionless number that describes how light, or any other radiation, propagates through a particular medium. It is defined as the ratio of the speed of light in a vacuum to its speed in a specific medium. The refractive index determines how much the path of light is bent or refracted when entering a material. Refractive Index of Core is denoted by η_core symbol.

How to calculate Refractive Index of Material Given Optical Power using this online calculator? To use this online calculator for Refractive Index of Material Given Optical Power, enter Ordinary Refractive Index (n₀), Non Linear Index Coefficient (n₂), Incident Optical Power (P_i) & Effective Area (A_eff) and hit the calculate button. Here is how the Refractive Index of Material Given Optical Power calculation can be explained with given input values -> 1.335 = 1.203+1.1*(6/50).

FAQ

What is Refractive Index of Material Given Optical Power?

Refractive Index of Material Given Optical Power is the formula used to calculate the refractive index of material using the optical power and ordinary refractive index. The refractive index is a dimensionless number that describes how light, or any other radiation, propagates through a particular medium. It is defined as the ratio of the speed of light in a vacuum to its speed in a specific medium. The refractive index determines how much the path of light is bent or refracted when entering a material and is represented as η_core = n₀+n₂*(P_i/A_eff) or Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area). Ordinary Refractive Index represents the refractive index of the material under normal conditions, i.e., when there is no (or negligible) optical intensity, Non Linear Index Coefficient quantifies the Kerr nonlinearity of a medium, Incident Optical Power is a measure of the rate at which light carries energy. It represents the amount of optical energy transmitted per unit of time & Effective Area is a measure of the cross-sectional area of an optical fiber through which light effectively propagates.

How to calculate Refractive Index of Material Given Optical Power?

Refractive Index of Material Given Optical Power is the formula used to calculate the refractive index of material using the optical power and ordinary refractive index. The refractive index is a dimensionless number that describes how light, or any other radiation, propagates through a particular medium. It is defined as the ratio of the speed of light in a vacuum to its speed in a specific medium. The refractive index determines how much the path of light is bent or refracted when entering a material is calculated using Refractive Index of Core = Ordinary Refractive Index+Non Linear Index Coefficient*(Incident Optical Power/Effective Area). To calculate Refractive Index of Material Given Optical Power, you need Ordinary Refractive Index (n₀), Non Linear Index Coefficient (n₂), Incident Optical Power (P_i) & Effective Area (A_eff). With our tool, you need to enter the respective value for Ordinary Refractive Index, Non Linear Index Coefficient, Incident Optical Power & Effective Area and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search