HCF of three numbers

Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Engineering Hydrology Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Groundwater Hydrology Abstractions from Precipitation Area, Velocity and Ultrasonic Method of Streamflow Measurement Discharge Measurements More >>

⤿

Recharge Aquifer Analysis and Properties Coefficient of Permeability Confined Groundwater Flow between Water Bodies More >>

⤿

Estimation of Recharge

⤿

Rainfall Infiltration Method Groundwater Level Fluctuation Specific Yield Method

⤿

✖The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources.ⓘ Area of Computation for Recharge [A_cr]			+10% -10%
✖The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.ⓘ Normal Rainfall in Monsoon Season [P_nm]			+10% -10%

✖The Rainfall Recharge in Hard Rock Sandstone refers to the process by which rainwater infiltrates through the surface layers and percolates into the underlying hard rock sandstone aquifer.ⓘ Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone [R_ss]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Rainfall Infiltration Method Formulas PDF PDF Image

Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season
R_ss = 7*A_cr*P_nm
This formula uses 3 Variables

Variables Used

Rainfall Recharge in Hard Rock Sandstone - (Measured in Cubic Meter per Second) - The Rainfall Recharge in Hard Rock Sandstone refers to the process by which rainwater infiltrates through the surface layers and percolates into the underlying hard rock sandstone aquifer.
Area of Computation for Recharge - (Measured in Square Meter) - The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources.
Normal Rainfall in Monsoon Season - (Measured in Meter) - The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.

STEP 1: Convert Input(s) to Base Unit

Area of Computation for Recharge: 13.3 Square Meter --> 13.3 Square Meter No Conversion Required
Normal Rainfall in Monsoon Season: 0.024 Meter --> 0.024 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_ss = 7*A_cr*P_nm --> 7*13.3*0.024

Evaluating ... ...

R_ss = 2.2344

STEP 3: Convert Result to Output's Unit

2.2344 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

2.2344 Cubic Meter per Second <-- Rainfall Recharge in Hard Rock Sandstone

(Calculation completed in 00.006 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Rainfall Infiltration Method » Recommended Value for Rainfall Factor for Various Hydrogeologic Conditions based on Norms » Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Recommended Value for Rainfall Factor for Various Hydrogeologic Conditions based on Norms Calculators

Recharge from Rainfall in West Coast Areas based on Recommended Rainfall Infiltration Factor

LaTeX Go Recharge from Rainfall in Alluvial West Coast = 10*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in East Coast Alluvial Areas

LaTeX Go Recharge from Rainfall in Alluvial East Coast = 16*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Hard Rock Areas with Low Clay Content

LaTeX Go Recharge from Rainfall in Hard Rock Low Clay = 11*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Alluvial Indo Gangetic and Inland Areas

LaTeX Go Recharge from Rainfall in Alluvial Indo = 22*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone Formula

LaTeX Go

Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season
R_ss = 7*A_cr*P_nm

What is Groundwater Flow?

Groundwater flow is defined as the part of streamflow that has infiltrated the ground, entered the phreatic zone, and has been discharged into a stream channel or springs; and seepage water.

How to Calculate Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone?

Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone calculator uses Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season to calculate the Rainfall Recharge in Hard Rock Sandstone, The Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone formula is defined as the process by which rainwater infiltrates the ground and replenishes the groundwater reserves in regions characterized by hard rock formations interspersed with semi-consolidated sandstone layers. Rainfall Recharge in Hard Rock Sandstone is denoted by R_ss symbol.

How to calculate Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone using this online calculator? To use this online calculator for Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone, enter Area of Computation for Recharge (A_cr) & Normal Rainfall in Monsoon Season (P_nm) and hit the calculate button. Here is how the Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone calculation can be explained with given input values -> 2.2344 = 7*13.3*0.024.

FAQ

What is Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone?

The Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone formula is defined as the process by which rainwater infiltrates the ground and replenishes the groundwater reserves in regions characterized by hard rock formations interspersed with semi-consolidated sandstone layers and is represented as R_ss = 7*A_cr*P_nm or Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season. The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources & The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.

How to calculate Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone?

The Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone formula is defined as the process by which rainwater infiltrates the ground and replenishes the groundwater reserves in regions characterized by hard rock formations interspersed with semi-consolidated sandstone layers is calculated using Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season. To calculate Recharge from Rainfall in Hard Rock Areas with Semi Consolidated Sandstone, you need Area of Computation for Recharge (A_cr) & Normal Rainfall in Monsoon Season (P_nm). With our tool, you need to enter the respective value for Area of Computation for Recharge & Normal Rainfall in Monsoon Season and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rainfall Recharge in Hard Rock Sandstone?

In this formula, Rainfall Recharge in Hard Rock Sandstone uses Area of Computation for Recharge & Normal Rainfall in Monsoon Season. We can use 1 other way(s) to calculate the same, which is/are as follows -

Rainfall Recharge in Hard Rock Sandstone = 7*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Home

FREE PDFs

🔍 Search