LCM of two numbers

Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt Calculator

Engineering Chemistry Financial Health More >>

↳

Civil Chemical Engineering Electrical Electronics More >>

⤿

Engineering Hydrology Bridge and Suspension Cable Coastal and Ocean Engineering Columns More >>

⤿

Groundwater Hydrology Abstractions from Precipitation Area, Velocity and Ultrasonic Method of Streamflow Measurement Discharge Measurements More >>

⤿

Recharge Aquifer Analysis and Properties Coefficient of Permeability Confined Groundwater Flow between Water Bodies More >>

⤿

Estimation of Recharge

⤿

Rainfall Infiltration Method Groundwater Level Fluctuation Specific Yield Method

⤿

✖The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources.ⓘ Area of Computation for Recharge [A_cr]			+10% -10%
✖The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.ⓘ Normal Rainfall in Monsoon Season [P_nm]			+10% -10%

✖The Recharge from Rainfall in Hard Rock Areas refers to process where rainwater infiltrates soil and percolates down to replenish groundwater reserves in regions characterized by hard rock formations.ⓘ Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt [R_hra]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Rainfall Infiltration Method Formulas PDF PDF Image

Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt Solution

STEP 0: Pre-Calculation Summary

Formula Used

Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season
R_hra = 8*A_cr*P_nm
This formula uses 3 Variables

Variables Used

Recharge from Rainfall in Hard Rock Areas - (Measured in Cubic Meter per Second) - The Recharge from Rainfall in Hard Rock Areas refers to process where rainwater infiltrates soil and percolates down to replenish groundwater reserves in regions characterized by hard rock formations.
Area of Computation for Recharge - (Measured in Square Meter) - The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources.
Normal Rainfall in Monsoon Season - (Measured in Meter) - The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.

STEP 1: Convert Input(s) to Base Unit

Area of Computation for Recharge: 13.3 Square Meter --> 13.3 Square Meter No Conversion Required
Normal Rainfall in Monsoon Season: 0.024 Meter --> 0.024 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

R_hra = 8*A_cr*P_nm --> 8*13.3*0.024

Evaluating ... ...

R_hra = 2.5536

STEP 3: Convert Result to Output's Unit

2.5536 Cubic Meter per Second --> No Conversion Required

FINAL ANSWER

2.5536 Cubic Meter per Second <-- Recharge from Rainfall in Hard Rock Areas

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Engineering Hydrology » Groundwater Hydrology » Recharge » Estimation of Recharge » Rainfall Infiltration Method » Recommended Value for Rainfall Factor for Various Hydrogeologic Conditions based on Norms » Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< Recommended Value for Rainfall Factor for Various Hydrogeologic Conditions based on Norms Calculators

Recharge from Rainfall in West Coast Areas based on Recommended Rainfall Infiltration Factor

LaTeX Go Recharge from Rainfall in Alluvial West Coast = 10*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in East Coast Alluvial Areas

LaTeX Go Recharge from Rainfall in Alluvial East Coast = 16*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Hard Rock Areas with Low Clay Content

LaTeX Go Recharge from Rainfall in Hard Rock Low Clay = 11*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Alluvial Indo Gangetic and Inland Areas

LaTeX Go Recharge from Rainfall in Alluvial Indo = 22*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt Formula

LaTeX Go

Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season
R_hra = 8*A_cr*P_nm

What is Groundwater Flow?

Groundwater flow is defined as the part of streamflow that has infiltrated the ground, entered the phreatic zone, and has been discharged into a stream channel or springs; and seepage water.

How to Calculate Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt?

Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt calculator uses Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season to calculate the Recharge from Rainfall in Hard Rock Areas, The Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt formula is defined as the process by which rainwater infiltrates into the ground in regions where the geological formations consist of basalt characterized by vesicles (small cavities) and joints (fractures). Recharge from Rainfall in Hard Rock Areas is denoted by R_hra symbol.

How to calculate Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt using this online calculator? To use this online calculator for Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt, enter Area of Computation for Recharge (A_cr) & Normal Rainfall in Monsoon Season (P_nm) and hit the calculate button. Here is how the Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt calculation can be explained with given input values -> 2.5536 = 8*13.3*0.024.

FAQ

What is Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt?

The Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt formula is defined as the process by which rainwater infiltrates into the ground in regions where the geological formations consist of basalt characterized by vesicles (small cavities) and joints (fractures) and is represented as R_hra = 8*A_cr*P_nm or Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season. The Area of Computation for Recharge refers to the catchment area where the amount of water infiltrating the ground and replenishing aquifers is calculated, crucial for managing groundwater resources & The Normal Rainfall in Monsoon Season refers to the statistical average of rainfall measured over a specified period, typically 30 years, during the monsoon months in a given region.

How to calculate Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt?

The Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt formula is defined as the process by which rainwater infiltrates into the ground in regions where the geological formations consist of basalt characterized by vesicles (small cavities) and joints (fractures) is calculated using Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season. To calculate Recharge from Rainfall in Hard Rock Areas with Vesicular and Jointed Basalt, you need Area of Computation for Recharge (A_cr) & Normal Rainfall in Monsoon Season (P_nm). With our tool, you need to enter the respective value for Area of Computation for Recharge & Normal Rainfall in Monsoon Season and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Recharge from Rainfall in Hard Rock Areas?

In this formula, Recharge from Rainfall in Hard Rock Areas uses Area of Computation for Recharge & Normal Rainfall in Monsoon Season. We can use 1 other way(s) to calculate the same, which is/are as follows -

Recharge from Rainfall in Hard Rock Areas = 8*Area of Computation for Recharge*Normal Rainfall in Monsoon Season

Home

FREE PDFs

🔍 Search