Receiving End Voltage using Capacitive Voltage in Nominal T Method Calculator

✖Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.ⓘ Capacitive Voltage in T [V_c(t)]			+10% -10%
✖Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.ⓘ Receiving End Current in T [I_r(t)]			+10% -10%
✖Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.ⓘ Impedance in T [Z_t]			+10% -10%

✖Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.ⓘ Receiving End Voltage using Capacitive Voltage in Nominal T Method [V_r(t)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Nominal T Method in Medium Line Formulas PDF PDF Image

Receiving End Voltage using Capacitive Voltage in Nominal T Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Receiving End Voltage in T = Capacitive Voltage in T-((Receiving End Current in T*Impedance in T)/2)
V_r(t) = V_c(t)-((I_r(t)*Z_t)/2)
This formula uses 4 Variables

Variables Used

Receiving End Voltage in T - (Measured in Volt) - Receiving End Voltage in T is the voltage developed at the receiving end of a transmission line.
Capacitive Voltage in T - (Measured in Volt) - Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line.
Receiving End Current in T - (Measured in Ampere) - Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.
Impedance in T - (Measured in Ohm) - Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

STEP 1: Convert Input(s) to Base Unit

Capacitive Voltage in T: 387 Volt --> 387 Volt No Conversion Required
Receiving End Current in T: 14.72 Ampere --> 14.72 Ampere No Conversion Required
Impedance in T: 9.07 Ohm --> 9.07 Ohm No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V_r(t) = V_c(t)-((I_r(t)*Z_t)/2) --> 387-((14.72*9.07)/2)

Evaluating ... ...

V_r(t) = 320.2448

STEP 3: Convert Result to Output's Unit

320.2448 Volt --> No Conversion Required

FINAL ANSWER

320.2448 Volt <-- Receiving End Voltage in T

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » Nominal T Method in Medium Line » Receiving End Voltage using Capacitive Voltage in Nominal T Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Shobhit Dimri

Bipin Tripathi Kumaon Institute of Technology (BTKIT), Dwarahat

Shobhit Dimri has verified this Calculator and 100+ more calculators!

< Nominal T Method in Medium Line Calculators

Receiving End Angle using Sending End Power in Nominal T Method

LaTeX Go Receiving End Phase Angle in T = acos((Sending End Power in T-Power Loss in T)/(Receiving End Voltage in T*Receiving End Current in T*3))

Sending End Current using Losses in Nominal T Method

LaTeX Go Sending End Current in T = sqrt((Power Loss in T/(3/2)*Resistance in T)-(Receiving End Current in T^2))

Capacitive Voltage in Nominal T Method

LaTeX Go Capacitive Voltage in T = Receiving End Voltage in T+(Receiving End Current in T*Impedance in T/2)

Losses in Nominal T Method

LaTeX Go Power Loss in T = 3*(Resistance in T/2)*(Receiving End Current in T^2+Sending End Current in T^2)

Receiving End Voltage using Capacitive Voltage in Nominal T Method Formula

LaTeX Go

Receiving End Voltage in T = Capacitive Voltage in T-((Receiving End Current in T*Impedance in T)/2)
V_r(t) = V_c(t)-((I_r(t)*Z_t)/2)

What is the difference between Nominal T Method and Nominal π Method?

In the Nominal T model of the Transmission line, the whole shunt capacitance of the line is assumed to be lumped at the middle of the line. In the Nominal π Method, the shunt capacitance of each line i.e. phase to neutral is divided into two equal parts.

How to Calculate Receiving End Voltage using Capacitive Voltage in Nominal T Method?

Receiving End Voltage using Capacitive Voltage in Nominal T Method calculator uses Receiving End Voltage in T = Capacitive Voltage in T-((Receiving End Current in T*Impedance in T)/2) to calculate the Receiving End Voltage in T, The Receiving End Voltage using Capacitive Voltage in Nominal T Method formula is defined as the voltage at the receiving end of the medium transmission lines. Receiving End Voltage in T is denoted by V_r(t) symbol.

How to calculate Receiving End Voltage using Capacitive Voltage in Nominal T Method using this online calculator? To use this online calculator for Receiving End Voltage using Capacitive Voltage in Nominal T Method, enter Capacitive Voltage in T (V_c(t)), Receiving End Current in T (I_r(t)) & Impedance in T (Z_t) and hit the calculate button. Here is how the Receiving End Voltage using Capacitive Voltage in Nominal T Method calculation can be explained with given input values -> 319.288 = 387-((14.72*9.07)/2).

FAQ

What is Receiving End Voltage using Capacitive Voltage in Nominal T Method?

The Receiving End Voltage using Capacitive Voltage in Nominal T Method formula is defined as the voltage at the receiving end of the medium transmission lines and is represented as V_r(t) = V_c(t)-((I_r(t)*Z_t)/2) or Receiving End Voltage in T = Capacitive Voltage in T-((Receiving End Current in T*Impedance in T)/2). Capacitive Voltage in T is defined as the voltage of the capacitor in a transmission line, Receiving End Current in T is defined as the magnitude and phase angle of current received at the load end of a medium transmission line & Impedance in T is defined as the amount of opposition faced by the direct or alternating current when it passes through a conductor component, circuit.

How to calculate Receiving End Voltage using Capacitive Voltage in Nominal T Method?

The Receiving End Voltage using Capacitive Voltage in Nominal T Method formula is defined as the voltage at the receiving end of the medium transmission lines is calculated using Receiving End Voltage in T = Capacitive Voltage in T-((Receiving End Current in T*Impedance in T)/2). To calculate Receiving End Voltage using Capacitive Voltage in Nominal T Method, you need Capacitive Voltage in T (V_c(t)), Receiving End Current in T (I_r(t)) & Impedance in T (Z_t). With our tool, you need to enter the respective value for Capacitive Voltage in T, Receiving End Current in T & Impedance in T and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search