Receiving End Current in End Condenser Method Calculator

✖Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.ⓘ Sending End Current in ECM [I_s(ecm)]			+10% -10%
✖Capacitive Current in ECM is defined as the current of the capacitor in a transmission line.ⓘ Capacitive Current in ECM [I_c(ecm)]			+10% -10%

✖Receiving End Current in ECM is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.ⓘ Receiving End Current in End Condenser Method [I_r(ecm)]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download End Condenser Method in Medium Line Formulas PDF PDF Image

Receiving End Current in End Condenser Method Solution

STEP 0: Pre-Calculation Summary

Formula Used

Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM
I_r(ecm) = I_s(ecm)-I_c(ecm)
This formula uses 3 Variables

Variables Used

Receiving End Current in ECM - (Measured in Ampere) - Receiving End Current in ECM is defined as the magnitude and phase angle of current received at the load end of a medium transmission line.
Sending End Current in ECM - (Measured in Ampere) - Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors.
Capacitive Current in ECM - (Measured in Ampere) - Capacitive Current in ECM is defined as the current of the capacitor in a transmission line.

STEP 1: Convert Input(s) to Base Unit

Sending End Current in ECM: 16 Ampere --> 16 Ampere No Conversion Required
Capacitive Current in ECM: 1.3 Ampere --> 1.3 Ampere No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

I_r(ecm) = I_s(ecm)-I_c(ecm) --> 16-1.3

Evaluating ... ...

I_r(ecm) = 14.7

STEP 3: Convert Result to Output's Unit

14.7 Ampere --> No Conversion Required

FINAL ANSWER

14.7 Ampere <-- Receiving End Current in ECM

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Electrical » Power System » Transmission Lines » Medium Line » End Condenser Method in Medium Line » Receiving End Current in End Condenser Method

Credits

Created by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has created this Calculator and 1500+ more calculators!

Verified by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has verified this Calculator and 1200+ more calculators!

< End Condenser Method in Medium Line Calculators

Sending End Voltage in End Condenser Method

LaTeX Go Sending End Voltage in ECM = Receiving End Voltage in ECM+(Sending End Current in ECM*Impedance in ECM)

Receiving End Current in End Condenser Method

LaTeX Go Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM

Sending End Current in End Condenser Method

LaTeX Go Sending End Current in ECM = Receiving End Current in ECM+Capacitive Current in ECM

Capacitive Current in End Condenser Method

LaTeX Go Capacitive Current in ECM = Sending End Current in ECM-Receiving End Current in ECM

Receiving End Current in End Condenser Method Formula

LaTeX Go

Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM
I_r(ecm) = I_s(ecm)-I_c(ecm)

What are the disadvantages of condenser end?

Although the end condenser method for the solution of medium lines is simple to work out calculations, yet it has the following drawbacks. There is a considerable error (about 10%) in calculations because the distributed capacitance has been assumed to be lumped or concentrated.

What is end condenser method?

In this method, the capacitance of the line is lumped or concentrated at the receiving or load end. This method of localizing the line capacitance at the load end overestimates the effects of capacitance.

How to Calculate Receiving End Current in End Condenser Method?

Receiving End Current in End Condenser Method calculator uses Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM to calculate the Receiving End Current in ECM, The Receiving End Current in End Condenser Method formula is defined as the voltage at the sending end of the medium transmission lines. Receiving End Current in ECM is denoted by I_r(ecm) symbol.

How to calculate Receiving End Current in End Condenser Method using this online calculator? To use this online calculator for Receiving End Current in End Condenser Method, enter Sending End Current in ECM (I_s(ecm)) & Capacitive Current in ECM (I_c(ecm)) and hit the calculate button. Here is how the Receiving End Current in End Condenser Method calculation can be explained with given input values -> 14.2 = 16-1.3.

FAQ

What is Receiving End Current in End Condenser Method?

The Receiving End Current in End Condenser Method formula is defined as the voltage at the sending end of the medium transmission lines and is represented as I_r(ecm) = I_s(ecm)-I_c(ecm) or Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM. Sending End Current in ECM is defined as the amount of current injected into a medium transmission line from the source or injectors & Capacitive Current in ECM is defined as the current of the capacitor in a transmission line.

How to calculate Receiving End Current in End Condenser Method?

The Receiving End Current in End Condenser Method formula is defined as the voltage at the sending end of the medium transmission lines is calculated using Receiving End Current in ECM = Sending End Current in ECM-Capacitive Current in ECM. To calculate Receiving End Current in End Condenser Method, you need Sending End Current in ECM (I_s(ecm)) & Capacitive Current in ECM (I_c(ecm)). With our tool, you need to enter the respective value for Sending End Current in ECM & Capacitive Current in ECM and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search