Rate of Flow of Mercury given Max Current Calculator

Chemistry Engineering Financial Health More >>

↳

Analytical chemistry Atmospheric Chemistry Atomic structure Basic Chemistry More >>

⤿

Potentiometry and Voltametry Distribution Ratio and Length of Column Number of Theoretical Plates and Capacity Factor Analytical Calculations More >>

✖Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero.ⓘ Maximum Diffusion Current [i_max]			+10% -10%
✖Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles.ⓘ Moles of Analyte [n]			+10% -10%
✖Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport.ⓘ Diffusion Constant [D]			+10% -10%
✖Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest.ⓘ Drop Time [t]			+10% -10%
✖Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.ⓘ Concentration at given time [C_A]			+10% -10%

✖Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second.ⓘ Rate of Flow of Mercury given Max Current [m]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Analytical chemistry Formula PDF PDF Image

Rate of Flow of Mercury given Max Current Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rate of Flow of Mercury = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Drop Time^(1/6))*Concentration at given time))^(3/2))
m = ((i_max/(708*n*(D^(1/2))*(t^(1/6))*C_A))^(3/2))
This formula uses 6 Variables

Variables Used

Rate of Flow of Mercury - Rate of Flow of Mercury the volume of mercury that passes through a cross-section each second.
Maximum Diffusion Current - Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero.
Moles of Analyte - Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles.
Diffusion Constant - Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport.
Drop Time - Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest.
Concentration at given time - Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.

STEP 1: Convert Input(s) to Base Unit

Maximum Diffusion Current: 10 --> No Conversion Required
Moles of Analyte: 3 --> No Conversion Required
Diffusion Constant: 4 --> No Conversion Required
Drop Time: 20 --> No Conversion Required
Concentration at given time: 10 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

m = ((i_max/(708*n*(D^(1/2))*(t^(1/6))*C_A))^(3/2)) --> ((10/(708*3*(4^(1/2))*(20^(1/6))*10))^(3/2))

Evaluating ... ...

m = 1.70791297932094E-06

STEP 3: Convert Result to Output's Unit

1.70791297932094E-06 --> No Conversion Required

FINAL ANSWER

1.70791297932094E-06 ≈ 1.7E-6 <-- Rate of Flow of Mercury

(Calculation completed in 00.005 seconds)

You are here -

Home » Chemistry » Analytical chemistry » Potentiometry and Voltametry » Rate of Flow of Mercury given Max Current

Credits

Created by Torsha_Paul

University of Calcutta (CU), Kolkata

Torsha_Paul has created this Calculator and 200+ more calculators!

Verified by Soupayan banerjee

National University of Judicial Science (NUJS), Kolkata

Soupayan banerjee has verified this Calculator and 900+ more calculators!

< Potentiometry and Voltametry Calculators

Area of Electrode

LaTeX Go Area of Electrode = (Cathodic Current/(2.69*(10^8)*Number of electrons given CI*Concentration given CI*(Diffusion Constant^0.5)*(Sweep Rate^0.5)))^(2/3)

Applied Potential

LaTeX Go Applied Potential in Potentiometry = Cell Potential in Potentiometry+(Current in Potentiometry*Resistance in Potentiometry)

Anodic Potential

LaTeX Go Anodic Potential = Cathodic Potential+(57/Moles of Electron)

Anodic Potential given half potential

LaTeX Go Anodic Potential = (Half Potential/0.5)-Cathodic Potential

Rate of Flow of Mercury given Max Current Formula

LaTeX Go

What is the importance of polarography?

Polarography is an electrochemical voltammetric technique that employs (dropping or static) mercury drop as a working electrode. In its most simple form polarography can be used to determine concentrations of electroactive species in liquids by measuring their mass-transport limiting currents.

How to Calculate Rate of Flow of Mercury given Max Current?

Rate of Flow of Mercury given Max Current calculator uses Rate of Flow of Mercury = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Drop Time^(1/6))*Concentration at given time))^(3/2)) to calculate the Rate of Flow of Mercury, The Rate of Flow of Mercury given Max Current formula is defined as the volume of mercury that passes through a cross-section each second. Rate of Flow of Mercury is denoted by m symbol.

How to calculate Rate of Flow of Mercury given Max Current using this online calculator? To use this online calculator for Rate of Flow of Mercury given Max Current, enter Maximum Diffusion Current (i_max), Moles of Analyte (n), Diffusion Constant (D), Drop Time (t) & Concentration at given time (C_A) and hit the calculate button. Here is how the Rate of Flow of Mercury given Max Current calculation can be explained with given input values -> 1.7E-6 = ((10/(708*3*(4^(1/2))*(20^(1/6))*10))^(3/2)).

FAQ

What is Rate of Flow of Mercury given Max Current?

The Rate of Flow of Mercury given Max Current formula is defined as the volume of mercury that passes through a cross-section each second and is represented as m = ((i_max/(708*n*(D^(1/2))*(t^(1/6))*C_A))^(3/2)) or Rate of Flow of Mercury = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Drop Time^(1/6))*Concentration at given time))^(3/2)). Maximum Diffusion Current is the maximum current that passes through a cell when the concentration of electro-active species at the electrode surface is zero, Moles of Analyte the quantity of an analyte in a sample that can be expressed in terms of moles, Diffusion Constant also known as the diffusion coefficient or diffusivity, is a physical constant that measures the rate of material transport, Drop Time is the time during when triangular impact pressure decreases from the highest to the lowest & Concentration at given time is that concentration is the ratio of solute in a solution to either solvent or total solution. Concentration is usually expressed in terms of mass per unit volume.

How to calculate Rate of Flow of Mercury given Max Current?

The Rate of Flow of Mercury given Max Current formula is defined as the volume of mercury that passes through a cross-section each second is calculated using Rate of Flow of Mercury = ((Maximum Diffusion Current/(708*Moles of Analyte*(Diffusion Constant^(1/2))*(Drop Time^(1/6))*Concentration at given time))^(3/2)). To calculate Rate of Flow of Mercury given Max Current, you need Maximum Diffusion Current (i_max), Moles of Analyte (n), Diffusion Constant (D), Drop Time (t) & Concentration at given time (C_A). With our tool, you need to enter the respective value for Maximum Diffusion Current, Moles of Analyte, Diffusion Constant, Drop Time & Concentration at given time and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Rate of Flow of Mercury?

In this formula, Rate of Flow of Mercury uses Maximum Diffusion Current, Moles of Analyte, Diffusion Constant, Drop Time & Concentration at given time. We can use 1 other way(s) to calculate the same, which is/are as follows -

Rate of Flow of Mercury = ((Maximum Diffusion Current/(607*Moles of Analyte*(Diffusion Constant^(1/2))*(Drop Time^(1/6))*Concentration at given time))^(3/2))

Home

FREE PDFs

🔍 Search