Rate of Actual Work using Rates of Ideal and Lost Work Calculator

✖Rate of Ideal Work is defined as the maximum rate of work obtained when the processes are mechanically reversible.ⓘ Rate of Ideal Work [Wrate_ideal]			+10% -10%
✖Rate of Lost Work is defined as the rate of work lost in the process by the rate of actual work to the ideal work.ⓘ Rate of Lost Work [Wrate_lost]			+10% -10%

✖Rate of Actual Work is defined as the rate of work done by the system or on the system considering all conditions.ⓘ Rate of Actual Work using Rates of Ideal and Lost Work [Wrate_actual]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF PDF Image

Rate of Actual Work using Rates of Ideal and Lost Work Solution

STEP 0: Pre-Calculation Summary

Formula Used

Rate of Actual Work = Rate of Ideal Work+Rate of Lost Work
Wrate_actual = Wrate_ideal+Wrate_lost
This formula uses 3 Variables

Variables Used

Rate of Actual Work - (Measured in Joule per Second) - Rate of Actual Work is defined as the rate of work done by the system or on the system considering all conditions.
Rate of Ideal Work - (Measured in Joule per Second) - Rate of Ideal Work is defined as the maximum rate of work obtained when the processes are mechanically reversible.
Rate of Lost Work - (Measured in Joule per Second) - Rate of Lost Work is defined as the rate of work lost in the process by the rate of actual work to the ideal work.

STEP 1: Convert Input(s) to Base Unit

Rate of Ideal Work: 200 Kilojoule per Second --> 200000 Joule per Second (Check conversion here)
Rate of Lost Work: 100 Kilojoule per Second --> 100000 Joule per Second (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

Wrate_actual = Wrate_ideal+Wrate_lost --> 200000+100000

Evaluating ... ...

Wrate_actual = 300000

STEP 3: Convert Result to Output's Unit

300000 Joule per Second -->300 Kilojoule per Second (Check conversion here)

FINAL ANSWER

300 Kilojoule per Second <-- Rate of Actual Work

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Laws of Thermodynamics their Applications and other Basic Concepts » Rate of Actual Work using Rates of Ideal and Lost Work

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Pragati Jaju

College Of Engineering (COEP), Pune

Pragati Jaju has verified this Calculator and 300+ more calculators!

< Laws of Thermodynamics their Applications and other Basic Concepts Calculators

Internal Energy using First Law of Thermodynamics

LaTeX Go Change in Internal Energy = Heat Transferred in Thermodynamic Process+Work done in Thermodynamic Process

Work using First Law of Thermodynamics

LaTeX Go Work done in Thermodynamic Process = Change in Internal Energy-Heat Transferred in Thermodynamic Process

Heat using First Law of Thermodynamics

LaTeX Go Heat Transferred in Thermodynamic Process = Change in Internal Energy-Work done in Thermodynamic Process

Turbine Efficiency using Actual and Isentropic Change in Enthalpy

LaTeX Go Turbine Efficiency = Change in Enthalpy in a Thermodynamic Process/Change in Enthalpy (Isentropic)

Rate of Actual Work using Rates of Ideal and Lost Work Formula

LaTeX Go

Rate of Actual Work = Rate of Ideal Work+Rate of Lost Work
Wrate_actual = Wrate_ideal+Wrate_lost

Define Rate of Lost Work.

The rate of work that is wasted as the result of irreversibilities in a process is called the rate of lost work and is defined as the difference between the rate of actual work of a change of state and the rate of ideal work for the same change of state. If the process were reversible, we would not have needed any extra work to do this. The rate of lost work represents a quantity of rate of work that is now unavailable because of irreversibility.

What is First Law of Thermodynamics?

In a closed system undergoing a thermodynamic cycle, cyclic integral of heat and cyclic integral of work are proportional to each other when expressed in their own units and are equal to each other when expressed in the consistent(same) units.

How to Calculate Rate of Actual Work using Rates of Ideal and Lost Work?

Rate of Actual Work using Rates of Ideal and Lost Work calculator uses Rate of Actual Work = Rate of Ideal Work+Rate of Lost Work to calculate the Rate of Actual Work, The Rate of Actual Work using Rates of Ideal and Lost Work formula is defined as the sum of the rate of ideal work and the rate of lost work. Rate of Actual Work is denoted by Wrate_actual symbol.

How to calculate Rate of Actual Work using Rates of Ideal and Lost Work using this online calculator? To use this online calculator for Rate of Actual Work using Rates of Ideal and Lost Work, enter Rate of Ideal Work (Wrate_ideal) & Rate of Lost Work (Wrate_lost) and hit the calculate button. Here is how the Rate of Actual Work using Rates of Ideal and Lost Work calculation can be explained with given input values -> 0.3 = 200000+100000.

FAQ

What is Rate of Actual Work using Rates of Ideal and Lost Work?

The Rate of Actual Work using Rates of Ideal and Lost Work formula is defined as the sum of the rate of ideal work and the rate of lost work and is represented as Wrate_actual = Wrate_ideal+Wrate_lost or Rate of Actual Work = Rate of Ideal Work+Rate of Lost Work. Rate of Ideal Work is defined as the maximum rate of work obtained when the processes are mechanically reversible & Rate of Lost Work is defined as the rate of work lost in the process by the rate of actual work to the ideal work.

How to calculate Rate of Actual Work using Rates of Ideal and Lost Work?

The Rate of Actual Work using Rates of Ideal and Lost Work formula is defined as the sum of the rate of ideal work and the rate of lost work is calculated using Rate of Actual Work = Rate of Ideal Work+Rate of Lost Work. To calculate Rate of Actual Work using Rates of Ideal and Lost Work, you need Rate of Ideal Work (Wrate_ideal) & Rate of Lost Work (Wrate_lost). With our tool, you need to enter the respective value for Rate of Ideal Work & Rate of Lost Work and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search