Radius of Well when Interference among three well is present Calculator

✖The radius of influence is the distance from a pumping well to the point where the drawdown, or lowering of the water table, becomes negligible.ⓘ Radius of Influence [R]			+10% -10%
✖Coefficient of Permeability refers to the ease with which water can flow through the aquifer's pore spaces.ⓘ Coefficient of Permeability [K]			+10% -10%
✖Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water.ⓘ Aquifer Thickness [b]			+10% -10%
✖The initial piezometric surface refers to the level at which groundwater naturally stands in a confined aquifer before any pumping or external influence.ⓘ Initial Piezometric Surface [H]			+10% -10%
✖Depth of Water is the depth in the well measured above the impermeable layer.ⓘ Depth of Water [h_w]			+10% -10%
✖Discharge by Each Well at Three Well Interference is the sum of the individual well rates, adjusted for interference.ⓘ Discharge by Each Well at Three Well Interference [Q_th]			+10% -10%
✖Distance Between Wells refers to the center to center distance between the well.ⓘ Distance Between Wells [B]			+10% -10%

✖The radius of well refers to the horizontal distance from the center of the well to its inner wall, essentially the well’s radius.ⓘ Radius of Well when Interference among three well is present [r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Water Resources Ground Water Formula PDF PDF Image

Radius of Well when Interference among three well is present Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radius of Well = (Radius of Influence^3)/(exp((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/Discharge by Each Well at Three Well Interference)*Distance Between Wells^2)
r = (R^3)/(exp((2*pi*K*b*(H-h_w))/Q_th)*B^2)
This formula uses 1 Constants, 1 Functions, 8 Variables

Constants Used

pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288

Functions Used

exp - n an exponential function, the value of the function changes by a constant factor for every unit change in the independent variable., exp(Number)

Variables Used

Radius of Well - (Measured in Meter) - The radius of well refers to the horizontal distance from the center of the well to its inner wall, essentially the well’s radius.
Radius of Influence - (Measured in Meter) - The radius of influence is the distance from a pumping well to the point where the drawdown, or lowering of the water table, becomes negligible.
Coefficient of Permeability - (Measured in Meter per Second) - Coefficient of Permeability refers to the ease with which water can flow through the aquifer's pore spaces.
Aquifer Thickness - (Measured in Meter) - Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water.
Initial Piezometric Surface - (Measured in Meter) - The initial piezometric surface refers to the level at which groundwater naturally stands in a confined aquifer before any pumping or external influence.
Depth of Water - (Measured in Meter) - Depth of Water is the depth in the well measured above the impermeable layer.
Discharge by Each Well at Three Well Interference - (Measured in Cubic Meter per Second) - Discharge by Each Well at Three Well Interference is the sum of the individual well rates, adjusted for interference.
Distance Between Wells - (Measured in Meter) - Distance Between Wells refers to the center to center distance between the well.

STEP 1: Convert Input(s) to Base Unit

Radius of Influence: 100 Meter --> 100 Meter No Conversion Required
Coefficient of Permeability: 0.105 Centimeter per Second --> 0.00105 Meter per Second (Check conversion here)
Aquifer Thickness: 15 Meter --> 15 Meter No Conversion Required
Initial Piezometric Surface: 20 Meter --> 20 Meter No Conversion Required
Depth of Water: 2.44 Meter --> 2.44 Meter No Conversion Required
Discharge by Each Well at Three Well Interference: 18.397 Cubic Meter per Second --> 18.397 Cubic Meter per Second No Conversion Required
Distance Between Wells: 2.93 Meter --> 2.93 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

r = (R^3)/(exp((2*pi*K*b*(H-h_w))/Q_th)*B^2) --> (100^3)/(exp((2*pi*0.00105*15*(20-2.44))/18.397)*2.93^2)

Evaluating ... ...

r = 105984.473867

STEP 3: Convert Result to Output's Unit

105984.473867 Meter --> No Conversion Required

FINAL ANSWER

105984.473867 ≈ 105984.5 Meter <-- Radius of Well

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Water Resources Ground Water » Flow in Wells » Interference Among Wells » Radius of Well when Interference among three well is present

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2100+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< Interference Among Wells Calculators

Thickness of Aquifer from Impermeable Layer when Interference among Well is Present

LaTeX Go Initial Piezometric Surface = Depth of Water+((Discharge by Each Well when Two Well Interference*log((Radius of Influence^2)/(Radius of Well*Distance Between Wells),e))/(2*pi*Coefficient of Permeability*Aquifer Thickness))

Discharge through Each Well when Interference among Well is Present

LaTeX Go Discharge by Each Well when Two Well Interference = (2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/(log((Radius of Influence^2)/(Radius of Well*Distance Between Wells),e))

Coefficient of Permeability when Interference among Well is Present

LaTeX Go Coefficient of Permeability = Discharge by Each Well when Two Well Interference*(log((Radius of Influence^2)/(Radius of Well*Distance Between Wells),e))/(2*pi*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))

Aquifer Thickness when Interference among Well is Present

LaTeX Go Aquifer Thickness = Discharge by Each Well when Two Well Interference*(log((Radius of Influence^2)/(Radius of Well*Distance Between Wells),e))/(2*pi*Coefficient of Permeability*(Initial Piezometric Surface-Depth of Water))

Radius of Well when Interference among three well is present Formula

LaTeX Go

What is Radius of Influence?

The radius of influence and radius of investigation of a pumping well are fundamental concepts in hydrogeology with various uses in well hydraulics and aquifer testing.

How to Calculate Radius of Well when Interference among three well is present?

Radius of Well when Interference among three well is present calculator uses Radius of Well = (Radius of Influence^3)/(exp((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/Discharge by Each Well at Three Well Interference)*Distance Between Wells^2) to calculate the Radius of Well, Radius of Well when Interference among three well is present formula is defined as a measure of the effective radius of a well in a multi-well system, considering the interference effects between the three wells, which is essential in understanding the flow behavior in wells and optimizing the production from these wells. Radius of Well is denoted by r symbol.

How to calculate Radius of Well when Interference among three well is present using this online calculator? To use this online calculator for Radius of Well when Interference among three well is present, enter Radius of Influence (R), Coefficient of Permeability (K), Aquifer Thickness (b), Initial Piezometric Surface (H), Depth of Water (h_w), Discharge by Each Well at Three Well Interference (Q_th) & Distance Between Wells (B) and hit the calculate button. Here is how the Radius of Well when Interference among three well is present calculation can be explained with given input values -> 105984.5 = (100^3)/(exp((2*pi*0.00105*15*(20-2.44))/18.397)*2.93^2).

FAQ

What is Radius of Well when Interference among three well is present?

Radius of Well when Interference among three well is present formula is defined as a measure of the effective radius of a well in a multi-well system, considering the interference effects between the three wells, which is essential in understanding the flow behavior in wells and optimizing the production from these wells and is represented as r = (R^3)/(exp((2*pi*K*b*(H-h_w))/Q_th)*B^2) or Radius of Well = (Radius of Influence^3)/(exp((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/Discharge by Each Well at Three Well Interference)*Distance Between Wells^2). The radius of influence is the distance from a pumping well to the point where the drawdown, or lowering of the water table, becomes negligible, Coefficient of Permeability refers to the ease with which water can flow through the aquifer's pore spaces, Aquifer Thickness (at Midpoint between Equipotential lines) or otherwise is the thickness of aquifer in which the pore spaces of rock forming the aquifer may or may not be with water, The initial piezometric surface refers to the level at which groundwater naturally stands in a confined aquifer before any pumping or external influence, Depth of Water is the depth in the well measured above the impermeable layer, Discharge by Each Well at Three Well Interference is the sum of the individual well rates, adjusted for interference & Distance Between Wells refers to the center to center distance between the well.

How to calculate Radius of Well when Interference among three well is present?

Radius of Well when Interference among three well is present formula is defined as a measure of the effective radius of a well in a multi-well system, considering the interference effects between the three wells, which is essential in understanding the flow behavior in wells and optimizing the production from these wells is calculated using Radius of Well = (Radius of Influence^3)/(exp((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/Discharge by Each Well at Three Well Interference)*Distance Between Wells^2). To calculate Radius of Well when Interference among three well is present, you need Radius of Influence (R), Coefficient of Permeability (K), Aquifer Thickness (b), Initial Piezometric Surface (H), Depth of Water (h_w), Discharge by Each Well at Three Well Interference (Q_th) & Distance Between Wells (B). With our tool, you need to enter the respective value for Radius of Influence, Coefficient of Permeability, Aquifer Thickness, Initial Piezometric Surface, Depth of Water, Discharge by Each Well at Three Well Interference & Distance Between Wells and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Radius of Well?

In this formula, Radius of Well uses Radius of Influence, Coefficient of Permeability, Aquifer Thickness, Initial Piezometric Surface, Depth of Water, Discharge by Each Well at Three Well Interference & Distance Between Wells. We can use 1 other way(s) to calculate the same, which is/are as follows -

Radius of Well = (Radius of Influence^2)/(exp((2*pi*Coefficient of Permeability*Aquifer Thickness*(Initial Piezometric Surface-Depth of Water))/Discharge by Each Well when Two Well Interference)*Distance Between Wells)

Home

FREE PDFs

🔍 Search