Radius of Toroid given Volume of Toroid Sector Solution

STEP 0: Pre-Calculation Summary
Formula Used
Radius of Toroid = (Volume of Toroid Sector/(2*pi*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi))))
r = (VSector/(2*pi*ACross Section*(Intersection/(2*pi))))
This formula uses 1 Constants, 4 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Radius of Toroid - (Measured in Meter) - Radius of Toroid is the line connecting the center of the overall Toroid to the center of a cross-section of the Toroid.
Volume of Toroid Sector - (Measured in Cubic Meter) - Volume of Toroid Sector is the amount of three dimensional space occupied by the Toroid Sector.
Cross Sectional Area of Toroid - (Measured in Square Meter) - Cross Sectional Area of Toroid is the amount of two-dimensional space occupied by the cross-section of the Toroid.
Angle of Intersection of Toroid Sector - (Measured in Radian) - Angle of Intersection of Toroid Sector is the angle subtended by the planes in which each of the circular end faces of the Toroid Sector is contained.
STEP 1: Convert Input(s) to Base Unit
Volume of Toroid Sector: 1570 Cubic Meter --> 1570 Cubic Meter No Conversion Required
Cross Sectional Area of Toroid: 50 Square Meter --> 50 Square Meter No Conversion Required
Angle of Intersection of Toroid Sector: 180 Degree --> 3.1415926535892 Radian (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
r = (VSector/(2*pi*ACross Section*(∠Intersection/(2*pi)))) --> (1570/(2*pi*50*(3.1415926535892/(2*pi))))
Evaluating ... ...
r = 9.99493042617292
STEP 3: Convert Result to Output's Unit
9.99493042617292 Meter --> No Conversion Required
FINAL ANSWER
9.99493042617292 9.99493 Meter <-- Radius of Toroid
(Calculation completed in 00.008 seconds)

Credits

Creator Image
Created by Shweta Patil
Walchand College of Engineering (WCE), Sangli
Shweta Patil has created this Calculator and 2500+ more calculators!
Verifier Image
Verified by Mona Gladys
St Joseph's College (SJC), Bengaluru
Mona Gladys has verified this Calculator and 1800+ more calculators!

Toroid Sector Calculators

Cross Sectional Perimeter of Toroid given Total Surface Area of Toroid Sector
​ LaTeX ​ Go Cross Sectional Perimeter of Toroid = (Total Surface Area of Toroid Sector-(2*Cross Sectional Area of Toroid))/(2*pi*Radius of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))
Cross Sectional Area of Toroid given Total Surface Area of Toroid Sector
​ LaTeX ​ Go Cross Sectional Area of Toroid = ((Total Surface Area of Toroid Sector-(2*pi*Radius of Toroid*Cross Sectional Perimeter of Toroid*(Angle of Intersection of Toroid Sector/(2*pi))))/2)
Radius of Toroid given Total Surface Area of Toroid Sector
​ LaTeX ​ Go Radius of Toroid = (Total Surface Area of Toroid Sector-(2*Cross Sectional Area of Toroid))/(2*pi*Cross Sectional Perimeter of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))
Cross Sectional Area of Toroid given Volume of Toroid Sector
​ LaTeX ​ Go Cross Sectional Area of Toroid = (Volume of Toroid Sector/(2*pi*Radius of Toroid*(Angle of Intersection of Toroid Sector/(2*pi))))

Radius of Toroid given Volume of Toroid Sector Formula

​LaTeX ​Go
Radius of Toroid = (Volume of Toroid Sector/(2*pi*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi))))
r = (VSector/(2*pi*ACross Section*(Intersection/(2*pi))))

What is Toroid Sector?

Toroid Sector is a piece cut straight out of a toroid. The size of the piece is determined by the angle of intersection originating at the center. An angle of 360° covers the whole toroid.

What is Toroid?

In geometry, a Toroid is a surface of revolution with a hole in the middle. The axis of revolution passes through the hole and so does not intersect the surface. For example, when a rectangle is rotated around an axis parallel to one of its edges, then a hollow rectangle-section ring is produced. If the revolved figure is a circle, then the object is called a torus.

How to Calculate Radius of Toroid given Volume of Toroid Sector?

Radius of Toroid given Volume of Toroid Sector calculator uses Radius of Toroid = (Volume of Toroid Sector/(2*pi*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))) to calculate the Radius of Toroid, The Radius of Toroid given Volume of Toroid Sector formula is defined as the line connecting the center of overall Toroid to the center of cross section of Toroid, calculated using volume of the Toroid Sector. Radius of Toroid is denoted by r symbol.

How to calculate Radius of Toroid given Volume of Toroid Sector using this online calculator? To use this online calculator for Radius of Toroid given Volume of Toroid Sector, enter Volume of Toroid Sector (VSector), Cross Sectional Area of Toroid (ACross Section) & Angle of Intersection of Toroid Sector (∠Intersection) and hit the calculate button. Here is how the Radius of Toroid given Volume of Toroid Sector calculation can be explained with given input values -> 9.99493 = (1570/(2*pi*50*(3.1415926535892/(2*pi)))).

FAQ

What is Radius of Toroid given Volume of Toroid Sector?
The Radius of Toroid given Volume of Toroid Sector formula is defined as the line connecting the center of overall Toroid to the center of cross section of Toroid, calculated using volume of the Toroid Sector and is represented as r = (VSector/(2*pi*ACross Section*(∠Intersection/(2*pi)))) or Radius of Toroid = (Volume of Toroid Sector/(2*pi*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))). Volume of Toroid Sector is the amount of three dimensional space occupied by the Toroid Sector, Cross Sectional Area of Toroid is the amount of two-dimensional space occupied by the cross-section of the Toroid & Angle of Intersection of Toroid Sector is the angle subtended by the planes in which each of the circular end faces of the Toroid Sector is contained.
How to calculate Radius of Toroid given Volume of Toroid Sector?
The Radius of Toroid given Volume of Toroid Sector formula is defined as the line connecting the center of overall Toroid to the center of cross section of Toroid, calculated using volume of the Toroid Sector is calculated using Radius of Toroid = (Volume of Toroid Sector/(2*pi*Cross Sectional Area of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))). To calculate Radius of Toroid given Volume of Toroid Sector, you need Volume of Toroid Sector (VSector), Cross Sectional Area of Toroid (ACross Section) & Angle of Intersection of Toroid Sector (∠Intersection). With our tool, you need to enter the respective value for Volume of Toroid Sector, Cross Sectional Area of Toroid & Angle of Intersection of Toroid Sector and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Radius of Toroid?
In this formula, Radius of Toroid uses Volume of Toroid Sector, Cross Sectional Area of Toroid & Angle of Intersection of Toroid Sector. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Radius of Toroid = (Total Surface Area of Toroid Sector-(2*Cross Sectional Area of Toroid))/(2*pi*Cross Sectional Perimeter of Toroid*(Angle of Intersection of Toroid Sector/(2*pi)))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!