Radial Load of Bearing given Radial Factor Calculator

✖Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.ⓘ Equivalent Dynamic Load on Back to Back Bearing [P_b]			+10% -10%
✖Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.ⓘ Thrust Factor for Bearing [Y]			+10% -10%
✖Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.ⓘ Axial or Thrust Load Acting on Bearing [F_a]			+10% -10%
✖Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.ⓘ Radial Factor [X]			+10% -10%
✖Race-rotation factor is a factor accounting for the rotation of the races of a bearing.ⓘ Race-Rotation Factor [V]			+10% -10%

✖Radial load acting on bearing is the amount of load onto the bearing acting radially.ⓘ Radial Load of Bearing given Radial Factor [F_r]

⎘ Copy

👎

Formula

LaTeX

Reset

👍

Download Design of Rolling Contact Bearing Formulas PDF PDF Image

Radial Load of Bearing given Radial Factor Solution

STEP 0: Pre-Calculation Summary

Formula Used

Radial Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Race-Rotation Factor)
F_r = (P_b-(Y*F_a))/(X*V)
This formula uses 6 Variables

Variables Used

Radial Load Acting on Bearing - (Measured in Newton) - Radial load acting on bearing is the amount of load onto the bearing acting radially.
Equivalent Dynamic Load on Back to Back Bearing - (Measured in Newton) - Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing.
Thrust Factor for Bearing - Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load.
Axial or Thrust Load Acting on Bearing - (Measured in Newton) - Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially.
Radial Factor - Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load.
Race-Rotation Factor - Race-rotation factor is a factor accounting for the rotation of the races of a bearing.

STEP 1: Convert Input(s) to Base Unit

Equivalent Dynamic Load on Back to Back Bearing: 7350 Newton --> 7350 Newton No Conversion Required
Thrust Factor for Bearing: 1.5 --> No Conversion Required
Axial or Thrust Load Acting on Bearing: 3000 Newton --> 3000 Newton No Conversion Required
Radial Factor: 0.56 --> No Conversion Required
Race-Rotation Factor: 1.2 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

F_r = (P_b-(Y*F_a))/(X*V) --> (7350-(1.5*3000))/(0.56*1.2)

Evaluating ... ...

F_r = 4241.07142857143

STEP 3: Convert Result to Output's Unit

4241.07142857143 Newton --> No Conversion Required

FINAL ANSWER

4241.07142857143 ≈ 4241.071 Newton <-- Radial Load Acting on Bearing

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Mechanical » Machine Design » Design of Rolling Contact Bearing » Dynamic and Equivalent Load » Radial Load of Bearing given Radial Factor

Credits

Created by Kethavath Srinath

Osmania University (OU), Hyderabad

Kethavath Srinath has created this Calculator and 1000+ more calculators!

Verified by Urvi Rathod

Vishwakarma Government Engineering College (VGEC), Ahmedabad

Urvi Rathod has verified this Calculator and 1900+ more calculators!

< Dynamic and Equivalent Load Calculators

Equivalent Dynamic Load for Bearing given Radial Factor

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = (Radial Factor*Radial Load Acting on Bearing)+(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing)

Equivalent Dynamic Load for Bearing given Rated Bearing Life

LaTeX Go Equivalent Dynamic Load on Back to Back Bearing = Dynamic Load Capacity of Bearing/(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Bearing given Rated Bearing Life

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/Constant p of Bearing))

Dynamic Load Capacity for Ball Bearing

LaTeX Go Dynamic Load Capacity of Bearing = Equivalent Dynamic Load on Back to Back Bearing*(Rated Bearing Life^(1/3))

Radial Load of Bearing given Radial Factor Formula

LaTeX Go

What is a rolling contact bearing?

The term rolling contact bearings refers to the wide variety of bearings that use spherical balls or some other type of roller between the stationary and the moving elements. The most common type of bearing supports a rotating shaft, resisting purely radial loads or a combination of radial and axial (thrust) loads

How to Calculate Radial Load of Bearing given Radial Factor?

Radial Load of Bearing given Radial Factor calculator uses Radial Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Race-Rotation Factor) to calculate the Radial Load Acting on Bearing, Radial Load of Bearing given Radial Factor is the load acting onto the bearing in the direction radially to the bearing. Radial Load Acting on Bearing is denoted by F_r symbol.

How to calculate Radial Load of Bearing given Radial Factor using this online calculator? To use this online calculator for Radial Load of Bearing given Radial Factor, enter Equivalent Dynamic Load on Back to Back Bearing (P_b), Thrust Factor for Bearing (Y), Axial or Thrust Load Acting on Bearing (F_a), Radial Factor (X) & Race-Rotation Factor (V) and hit the calculate button. Here is how the Radial Load of Bearing given Radial Factor calculation can be explained with given input values -> 4241.071 = (7350-(1.5*3000))/(0.56*1.2).

FAQ

What is Radial Load of Bearing given Radial Factor?

Radial Load of Bearing given Radial Factor is the load acting onto the bearing in the direction radially to the bearing and is represented as F_r = (P_b-(Y*F_a))/(X*V) or Radial Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Race-Rotation Factor). Equivalent dynamic load on back to back bearing is a net dynamic load on a back-to-back or face-to-face mounted bearing, Thrust Factor for Bearing is used to denote the portion of the thrust force contributing to equivalent bearing load, Axial or thrust load acting on bearing is the amount of thrust load onto the bearing acting axially, Radial Factor is used to denote the portion of the radial force contributing to equivalent bearing load & Race-rotation factor is a factor accounting for the rotation of the races of a bearing.

How to calculate Radial Load of Bearing given Radial Factor?

Radial Load of Bearing given Radial Factor is the load acting onto the bearing in the direction radially to the bearing is calculated using Radial Load Acting on Bearing = (Equivalent Dynamic Load on Back to Back Bearing-(Thrust Factor for Bearing*Axial or Thrust Load Acting on Bearing))/(Radial Factor*Race-Rotation Factor). To calculate Radial Load of Bearing given Radial Factor, you need Equivalent Dynamic Load on Back to Back Bearing (P_b), Thrust Factor for Bearing (Y), Axial or Thrust Load Acting on Bearing (F_a), Radial Factor (X) & Race-Rotation Factor (V). With our tool, you need to enter the respective value for Equivalent Dynamic Load on Back to Back Bearing, Thrust Factor for Bearing, Axial or Thrust Load Acting on Bearing, Radial Factor & Race-Rotation Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search